openwrtv3/target/linux/layerscape/patches-4.4/8026-cpufreq-qoriq-Don-t-look-at-clock-implementation-det.patch
Yutang Jiang c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

274 lines
7.3 KiB
Diff

From 8f3768a7c649526f821a6a4cd32cc44a8e7fa317 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Fri, 15 Jan 2016 07:34:33 +0000
Subject: [PATCH 26/70] cpufreq: qoriq: Don't look at clock implementation
details
Get the CPU clock's potential parent clocks from the clock interface
itself, rather than manually parsing the clocks property to find a
phandle, looking at the clock-names property of that, and assuming that
those are valid parent clocks for the cpu clock.
This is necessary now that the clocks are generated based on the clock
driver's knowledge of the chip rather than a fragile device-tree
description of the mux options.
We can now rely on the clock driver to ensure that the mux only exposes
options that are valid. The cpufreq driver was currently being overly
conservative in some cases -- for example, the "min_cpufreq =
get_bus_freq()" restriction only applies to chips with erratum
A-004510, and whether the freq_mask used on p5020 is needed depends on
the actual frequencies of the PLLs (FWIW, p5040 has a similar
limitation but its .freq_mask was zero) -- and the frequency mask
mechanism made assumptions about particular parent clock indices that
are no longer valid.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/qoriq-cpufreq.c | 138 ++++++++++++---------------------------
1 file changed, 41 insertions(+), 97 deletions(-)
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -11,6 +11,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/cpufreq.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -35,53 +36,20 @@ struct cpu_data {
struct cpufreq_frequency_table *table;
};
+/*
+ * Don't use cpufreq on this SoC -- used when the SoC would have otherwise
+ * matched a more generic compatible.
+ */
+#define SOC_BLACKLIST 1
+
/**
* struct soc_data - SoC specific data
- * @freq_mask: mask the disallowed frequencies
- * @flag: unique flags
+ * @flags: SOC_xxx
*/
struct soc_data {
- u32 freq_mask[4];
- u32 flag;
-};
-
-#define FREQ_MASK 1
-/* see hardware specification for the allowed frqeuencies */
-static const struct soc_data sdata[] = {
- { /* used by p2041 and p3041 */
- .freq_mask = {0x8, 0x8, 0x2, 0x2},
- .flag = FREQ_MASK,
- },
- { /* used by p5020 */
- .freq_mask = {0x8, 0x2},
- .flag = FREQ_MASK,
- },
- { /* used by p4080, p5040 */
- .freq_mask = {0},
- .flag = 0,
- },
+ u32 flags;
};
-/*
- * the minimum allowed core frequency, in Hz
- * for chassis v1.0, >= platform frequency
- * for chassis v2.0, >= platform frequency / 2
- */
-static u32 min_cpufreq;
-static const u32 *fmask;
-
-#if defined(CONFIG_ARM)
-static int get_cpu_physical_id(int cpu)
-{
- return topology_core_id(cpu);
-}
-#else
-static int get_cpu_physical_id(int cpu)
-{
- return get_hard_smp_processor_id(cpu);
-}
-#endif
-
static u32 get_bus_freq(void)
{
struct device_node *soc;
@@ -99,9 +67,10 @@ static u32 get_bus_freq(void)
return sysfreq;
}
-static struct device_node *cpu_to_clk_node(int cpu)
+static struct clk *cpu_to_clk(int cpu)
{
- struct device_node *np, *clk_np;
+ struct device_node *np;
+ struct clk *clk;
if (!cpu_present(cpu))
return NULL;
@@ -110,37 +79,28 @@ static struct device_node *cpu_to_clk_no
if (!np)
return NULL;
- clk_np = of_parse_phandle(np, "clocks", 0);
- if (!clk_np)
- return NULL;
-
+ clk = of_clk_get(np, 0);
of_node_put(np);
-
- return clk_np;
+ return clk;
}
/* traverse cpu nodes to get cpu mask of sharing clock wire */
static void set_affected_cpus(struct cpufreq_policy *policy)
{
- struct device_node *np, *clk_np;
struct cpumask *dstp = policy->cpus;
+ struct clk *clk;
int i;
- np = cpu_to_clk_node(policy->cpu);
- if (!np)
- return;
-
for_each_present_cpu(i) {
- clk_np = cpu_to_clk_node(i);
- if (!clk_np)
+ clk = cpu_to_clk(i);
+ if (IS_ERR(clk)) {
+ pr_err("%s: no clock for cpu %d\n", __func__, i);
continue;
+ }
- if (clk_np == np)
+ if (clk_is_match(policy->clk, clk))
cpumask_set_cpu(i, dstp);
-
- of_node_put(clk_np);
}
- of_node_put(np);
}
/* reduce the duplicated frequencies in frequency table */
@@ -198,7 +158,7 @@ static int qoriq_cpufreq_cpu_init(struct
{
struct device_node *np, *pnode;
int i, count, ret;
- u32 freq, mask;
+ u32 freq;
struct clk *clk;
struct cpufreq_frequency_table *table;
struct cpu_data *data;
@@ -219,17 +179,12 @@ static int qoriq_cpufreq_cpu_init(struct
goto err_nomem2;
}
- pnode = of_parse_phandle(np, "clocks", 0);
- if (!pnode) {
- pr_err("%s: could not get clock information\n", __func__);
- goto err_nomem2;
- }
+ count = clk_get_num_parents(policy->clk);
- count = of_property_count_strings(pnode, "clock-names");
data->pclk = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
if (!data->pclk) {
pr_err("%s: no memory\n", __func__);
- goto err_node;
+ goto err_nomem2;
}
table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL);
@@ -238,23 +193,11 @@ static int qoriq_cpufreq_cpu_init(struct
goto err_pclk;
}
- if (fmask)
- mask = fmask[get_cpu_physical_id(cpu)];
- else
- mask = 0x0;
-
for (i = 0; i < count; i++) {
- clk = of_clk_get(pnode, i);
+ clk = clk_get_parent_by_index(policy->clk, i);
data->pclk[i] = clk;
freq = clk_get_rate(clk);
- /*
- * the clock is valid if its frequency is not masked
- * and large than minimum allowed frequency.
- */
- if (freq < min_cpufreq || (mask & (1 << i)))
- table[i].frequency = CPUFREQ_ENTRY_INVALID;
- else
- table[i].frequency = freq / 1000;
+ table[i].frequency = freq / 1000;
table[i].driver_data = i;
}
freq_table_redup(table, count);
@@ -288,10 +231,7 @@ err_nomem1:
kfree(table);
err_pclk:
kfree(data->pclk);
-err_node:
- of_node_put(pnode);
err_nomem2:
- policy->driver_data = NULL;
kfree(data);
err_np:
of_node_put(np);
@@ -332,12 +272,20 @@ static struct cpufreq_driver qoriq_cpufr
.attr = cpufreq_generic_attr,
};
+static const struct soc_data blacklist = {
+ .flags = SOC_BLACKLIST,
+};
+
static const struct of_device_id node_matches[] __initconst = {
- { .compatible = "fsl,p2041-clockgen", .data = &sdata[0], },
- { .compatible = "fsl,p3041-clockgen", .data = &sdata[0], },
- { .compatible = "fsl,p5020-clockgen", .data = &sdata[1], },
- { .compatible = "fsl,p4080-clockgen", .data = &sdata[2], },
- { .compatible = "fsl,p5040-clockgen", .data = &sdata[2], },
+ /* e6500 cannot use cpufreq due to erratum A-008083 */
+ { .compatible = "fsl,b4420-clockgen", &blacklist },
+ { .compatible = "fsl,b4860-clockgen", &blacklist },
+ { .compatible = "fsl,t2080-clockgen", &blacklist },
+ { .compatible = "fsl,t4240-clockgen", &blacklist },
+
+ { .compatible = "fsl,ls1021a-clockgen", },
+ { .compatible = "fsl,p4080-clockgen", },
+ { .compatible = "fsl,qoriq-clockgen-1.0", },
{ .compatible = "fsl,qoriq-clockgen-2.0", },
{}
};
@@ -355,16 +303,12 @@ static int __init qoriq_cpufreq_init(voi
match = of_match_node(node_matches, np);
data = match->data;
- if (data) {
- if (data->flag)
- fmask = data->freq_mask;
- min_cpufreq = get_bus_freq();
- } else {
- min_cpufreq = get_bus_freq() / 2;
- }
of_node_put(np);
+ if (data && data->flags & SOC_BLACKLIST)
+ return -ENODEV;
+
ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
if (!ret)
pr_info("Freescale QorIQ CPU frequency scaling driver\n");