openwrtv3/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
Luka Perkov fcfbbfc385 ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44309
2015-02-07 20:53:16 +00:00

140 lines
3.9 KiB
Diff

--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -186,6 +186,19 @@ static struct gpio_led ubnt_unifi_outdoo
}
};
+static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:white:front",
+ .gpio = 1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:blue:front",
+ .gpio = 0,
+ .active_low = 0,
+ }
+};
+
+
static void __init ubnt_unifi_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -245,6 +258,38 @@ MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDO
"Ubiquiti UniFiAP Outdoor",
ubnt_unifi_outdoor_setup);
+
+static void __init ubnt_unifi_outdoor_plus_setup(void)
+{
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
+ UBNT_UNIFIOD_2ND_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
+ ubnt_unifi_outdoor_plus_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
+ "Ubiquiti UniFiAP Outdoor+",
+ ubnt_unifi_outdoor_plus_setup);
+
+
static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
{
.name = "ubnt:white:dome",
@@ -332,3 +377,78 @@ static void __init ubnt_uap_pro_setup(vo
MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
ubnt_uap_pro_setup);
+#define UBNT_XW_GPIO_LED_L1 11
+#define UBNT_XW_GPIO_LED_L2 16
+#define UBNT_XW_GPIO_LED_L3 13
+#define UBNT_XW_GPIO_LED_L4 14
+
+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:red:link1",
+ .gpio = UBNT_XW_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:orange:link2",
+ .gpio = UBNT_XW_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link3",
+ .gpio = UBNT_XW_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link4",
+ .gpio = UBNT_XW_GPIO_LED_L4,
+ .active_low = 1,
+ },
+};
+
+static void __init ubnt_xw_init(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
+ ubnt_xw_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+}
+
+static void __init ubnt_nano_m_xw_setup(void)
+{
+ ubnt_xw_init();
+
+ /* GMAC0 is connected to an AR8326 switch */
+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_register_eth(0);
+}
+
+static void __init ubnt_loco_m_xw_setup(void)
+{
+ ubnt_xw_init();
+
+ ath79_register_mdio(0, ~BIT(1));
+ ath79_eth0_data.phy_mask = BIT(1);
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
+ ubnt_nano_m_xw_setup);
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
+ ubnt_loco_m_xw_setup);