openwrtv3/target/linux/brcm47xx/base-files/etc/board.d/01_network
Paul Wassi 2276bc0082 brcm47xx: cosmetic fix in model detection
In "brcm47xx: rework model detection" the file 01_detect was moved
to 01_network, therefore also update the warning message in case
everything fails.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-08-13 08:37:19 +02:00

195 lines
4.9 KiB
Bash
Executable file

#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2015 OpenWrt.org
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
configure_by_vlanports() {
local vlan0ports="$(nvram get vlan0ports)"
local vlan1ports="$(nvram get vlan1ports)"
local vlan2ports="$(nvram get vlan2ports)"
local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
[ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
[ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
then
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
[ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
[ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
then
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
[ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
[ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
then
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
[ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
[ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
then
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
else
logger -t "01_network" "Unable to determine network configuration"
ucidef_set_interface_lan "eth0"
fi
}
configure_by_boardnum() {
local boardnum="$1"
case "$boardnum" in
# WAP54G, Sitecom WL-105b
"2" | \
"1024")
ucidef_set_interface_lan "eth0"
;;
# Generic detection fallback
*)
configure_by_vlanports
;;
esac
}
configure_by_boardtype() {
local boardtype="$1"
local boardnum="$2"
case "$boardtype" in
"bcm94710r4")
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
"0x0467")
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
;;
"0x042f" | \
"0x0472")
# WL-500gP
if [ "$boardnum" = "45" ]; then
ucidef_add_switch "switch0" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
# Generic BCM94704
else
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
# MAC addresses on 4704 tend to be screwed up. Add a workaround here
local mac="$(nvram get et0macaddr)"
local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
case "$mac" in
$pat)
ucidef_set_interface_macaddr "lan" "$mac"
ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
;;
esac
fi
;;
# Buffalo WBR-B11 and Buffalo WBR-G54
"bcm94710ap")
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
;;
*)
configure_by_boardnum "$boardnum"
;;
esac
}
configure_by_model() {
local model="$1"
local boardtype="$2"
local boardnum="$3"
# Netgear WGT634U exception
if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
return
fi
case "$model" in
"Asus WLHDD" | \
"Asus WL300G")
ucidef_set_interface_lan "eth1"
;;
"Asus WL330GE")
ucidef_add_switch "switch0" "4:lan" "5t@eth0"
;;
"Asus WL500G" | \
"Microsoft MN-700")
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
"Asus RT-N12"* | \
"Asus WL500GP V2" | \
"Buffalo WHR-G125" | \
"D-Link DIR-330" | \
"Motorola WR850G" | \
"Siemens SE505 V2")
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
;;
"Asus WL700")
ucidef_add_switch "switch0" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
;;
"Asus WL500W" | \
"Dell TrueMobile 2300")
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
"Asus RT-N16"* | \
"Linksys E3000 V1")
ucidef_add_switch "switch0" \
"0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
;;
*)
configure_by_boardtype "$boardtype" "$boardnum"
;;
esac
}
model="$(cat /tmp/sysinfo/model)"
boardtype="$(board_name)"
case "$boardtype" in
*:*)
boardnum="${boardtype##*:}"
boardtype="${boardtype%:*}"
;;
esac
board_config_update
configure_by_model "$model" "$boardtype" "$boardnum"
board_config_flush