openwrtv3/target/linux/brcm47xx/patches-2.6.37/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
Alexandros C. Couloumbis f950840ec9 linux/brcm47xx: add preliminary 2.6.37 kernel support
SVN-Revision: 23945
2010-11-10 19:01:07 +00:00

75 lines
2.3 KiB
Diff

From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 18 Jul 2010 14:59:24 +0200
Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
Swap the first and second serial if console=ttyS1 was set.
Set it up and register it for early serial support.
This patch has been in OpenWRT for a long time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++-
1 files changed, 38 insertions(+), 1 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -28,6 +28,8 @@
#include <linux/types.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -190,12 +192,47 @@ static int bcm47xx_get_invariants(struct
void __init plat_mem_setup(void)
{
- int err;
+ int i, err;
+ char buf[100];
+ struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
+ mcore = &ssb_bcm47xx.mipscore;
+
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0 ||
+ cfe_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+
+ printk(KERN_DEBUG "Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+ sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
+
+ for (i = 0; i < mcore->nr_serial_ports; i++) {
+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+ s.line = i;
+ s.mapbase = (unsigned int) port->regs;
+ s.membase = port->regs;
+ s.irq = port->irq + 2;
+ s.uartclk = port->baud_base;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ s.iotype = SERIAL_IO_MEM;
+ s.regshift = port->reg_shift;
+
+ early_serial_setup(&s);
+ }
+ printk(KERN_DEBUG "Serial init done.\n");
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;