No description
Find a file
2009-07-25 21:49:48 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857) 2009-07-25 21:45:51 +00:00
package remove CFLAGS_LARGEFILE, not defined anywhere (#4856) 2009-07-25 21:49:48 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target enable sysupgrade support for the TL-WR741ND 2009-07-25 19:50:26 +00:00
toolchain binutils: use 2.19.1 for ppc40x by default 2009-07-19 11:33:47 +00:00
tools firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>) 2009-07-12 08:59:18 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857) 2009-07-25 21:45:51 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
rules.mk globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857) 2009-07-25 21:45:51 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org