KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/package/network/services/dnsmasq/Makefile
Eric Luehrsen 9525743c07 dnsmasq: make DHCPv6 viable for standalone dnsmasq install 
dnsmasq has sufficient services to meet the needs of DHCP
and RA with IP6 for single router router users. This is
the most common use for consumer routers. Its reenforced
as most ISP tend to only DHCP-PD /64. dnsmasq has year
over year demonstrated great flexibility in its option
set, and support for off-standard DHCP clients.

odhcpd has enhanced capabilities focused on IP6 such
as DHCP/RA relay and NDP proxy. However, it is not as
flexible in its option set. odhcpd is not as forgiving
with off-standard DHCP clients. Some points may represent
a long term TODO list, but it is the state currently.

These changes make any such combination possible. Already
odhcpd can be set as the main dhcp server. Now odhcpd
can be removed or disabled and dnsmasq will take over
if DHCPv6 compiled in. The existing DHCPv6 and RA UCI
are translated into dnsmasq.conf. The changes focus on
'--dhcp-range', '--dhcp-host', and '--dhcp-options'.

DHCP host ID is least 16 bits [::1000-::FFFF], but
leaves low range for typical infrastructure assignments.
dnsmasq accepts DHCPv6 options in the tranditional
'--dhcp-option' put they must be prefixed 'option6:'.
dnsmasq will also discover SLAAC DNS entries from DHCPv4
clients MAC, and confirm with a ping at least renew.

Long term TODO include improving use of dnsmasq relay
options for DHCPv4 and DHCPv6 in parallel. It would also
be possible to preconfigure DHCP-PD in host-with-options
records for fixed infrastructure.

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
[Jo-Philipp Wich: emit proper IPv6 hostid format in dhcp-host directive]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00

169 lines
4.9 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=dnsmasq
PKG_VERSION:=2.76
PKG_RELEASE:=8
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq
PKG_HASH:=4b92698dee19ca0cb2a8f2e48f1d2dffd01a21eb15d1fbed4cf085630c8c9f96
PKG_LICENSE:=GPL-2.0
PKG_LICENSE_FILES:=COPYING
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL:=1
PKG_BUILD_PARALLEL:=1
PKG_CONFIG_DEPENDS:=CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6 \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc
include $(INCLUDE_DIR)/package.mk
define Package/dnsmasq/Default
SECTION:=net
CATEGORY:=Base system
TITLE:=DNS and DHCP server
URL:=http://www.thekelleys.org.uk/dnsmasq/
USERID:=dnsmasq=453:dnsmasq=453
endef
define Package/dnsmasq
$(call Package/dnsmasq/Default)
VARIANT:=nodhcpv6
endef
define Package/dnsmasq-dhcpv6
$(call Package/dnsmasq/Default)
TITLE += (with DHCPv6 support)
DEPENDS:=@IPV6
VARIANT:=dhcpv6
endef
define Package/dnsmasq-full
$(call Package/dnsmasq/Default)
TITLE += (with DNSSEC, DHCPv6, Auth DNS, IPset, Conntrack, NO_ID enabled by default)
DEPENDS:=+PACKAGE_dnsmasq_full_dnssec:libnettle \
+PACKAGE_dnsmasq_full_ipset:kmod-ipt-ipset \
+PACKAGE_dnsmasq_full_conntrack:libnetfilter-conntrack
VARIANT:=full
endef
define Package/dnsmasq/description
It is intended to provide coupled DNS and DHCP service to a LAN.
endef
define Package/dnsmasq-dhcpv6/description
$(call Package/dnsmasq/description)
This is a variant with DHCPv6 support
endef
define Package/dnsmasq-full/description
$(call Package/dnsmasq/description)
This is a fully configurable variant with DHCPv6, DNSSEC, Authoritative DNS and
IPset, Conntrack support & NO_ID enabled by default.
endef
define Package/dnsmasq/conffiles
/etc/config/dhcp
/etc/dnsmasq.conf
endef
define Package/dnsmasq-full/config
if PACKAGE_dnsmasq-full
config PACKAGE_dnsmasq_full_dhcpv6
bool "Build with DHCPv6 support."
depends on IPV6
default y
config PACKAGE_dnsmasq_full_dnssec
bool "Build with DNSSEC support."
default y
config PACKAGE_dnsmasq_full_auth
bool "Build with the facility to act as an authoritative DNS server."
default y
config PACKAGE_dnsmasq_full_ipset
bool "Build with IPset support."
default y
config PACKAGE_dnsmasq_full_conntrack
bool "Build with Conntrack support."
default y
config PACKAGE_dnsmasq_full_noid
bool "Build with NO_ID. (hide *.bind pseudo domain)"
default y
config PACKAGE_dnsmasq_full_broken_rtc
bool "Build with HAVE_BROKEN_RTC."
default n
endif
endef
Package/dnsmasq-dhcpv6/conffiles = $(Package/dnsmasq/conffiles)
Package/dnsmasq-full/conffiles = $(Package/dnsmasq/conffiles)
TARGET_CFLAGS += -ffunction-sections -fdata-sections
TARGET_LDFLAGS += -Wl,--gc-sections
COPTS = $(if $(CONFIG_IPV6),,-DNO_IPV6)
ifeq ($(BUILD_VARIANT),nodhcpv6)
COPTS += -DNO_DHCP6
endif
ifeq ($(BUILD_VARIANT),full)
COPTS += $(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6),,-DNO_DHCP6) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec),-DHAVE_DNSSEC) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth),,-DNO_AUTH) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset),,-DNO_IPSET) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack),-DHAVE_CONNTRACK,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid),-DNO_ID,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc),-DHAVE_BROKEN_RTC)
COPTS += $(if $(CONFIG_LIBNETTLE_MINI),-DNO_GMP,)
else
COPTS += -DNO_AUTH -DNO_IPSET -DNO_ID
endif
MAKE_FLAGS := \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
COPTS="$(COPTS)" \
PREFIX="/usr"
define Package/dnsmasq/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_INSTALL_DIR)/usr/sbin/dnsmasq $(1)/usr/sbin/
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_DATA) ./files/dhcp.conf $(1)/etc/config/dhcp
$(INSTALL_DATA) ./files/dnsmasq.conf $(1)/etc/dnsmasq.conf
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/dnsmasq.init $(1)/etc/init.d/dnsmasq
$(INSTALL_DIR) $(1)/etc/hotplug.d/ntp
$(INSTALL_DATA) ./files/dnsmasqsec.hotplug $(1)/etc/hotplug.d/ntp/25-dnsmasqsec
endef
Package/dnsmasq-dhcpv6/install = $(Package/dnsmasq/install)
define Package/dnsmasq-full/install
$(call Package/dnsmasq/install,$(1))
ifneq ($(CONFIG_PACKAGE_dnsmasq_full_dnssec),)
$(INSTALL_DIR) $(1)/usr/share/dnsmasq
$(INSTALL_DATA) $(PKG_BUILD_DIR)/trust-anchors.conf $(1)/usr/share/dnsmasq
endif
endef
$(eval $(call BuildPackage,dnsmasq))
$(eval $(call BuildPackage,dnsmasq-dhcpv6))
$(eval $(call BuildPackage,dnsmasq-full))
Reference in a new issue View git blame Copy permalink