openwrtv3/target/linux/brcm2708/patches-4.4/0398-dmaengine-bcm2835-add-dma_memcopy-support-to-bcm2835.patch
Álvaro Fernández Rojas dab5a44067 brcm2708: update linux 4.4 patches to latest version
n
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-06 22:24:42 +01:00

87 lines
3.4 KiB
Diff

From 5e439596e0a4a5a14556d8b3f246e7204a8f3cd0 Mon Sep 17 00:00:00 2001
From: Martin Sperl <kernel@martin.sperl.org>
Date: Wed, 16 Mar 2016 12:25:02 -0700
Subject: [PATCH] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma
Also added check for an error condition in bcm2835_dma_create_cb_chain
that showed up during development of this patch.
Tested using dmatest for all enabled channels.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/bcm2835-dma.c | 36 +++++++++++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -310,6 +310,9 @@ static struct bcm2835_desc *bcm2835_dma_
struct bcm2835_cb_entry *cb_entry;
struct bcm2835_dma_cb *control_block;
+ if (!frames)
+ return NULL;
+
/* allocate and setup the descriptor. */
d = kzalloc(sizeof(*d) + frames * sizeof(struct bcm2835_cb_entry),
gfp);
@@ -597,6 +600,34 @@ static void bcm2835_dma_issue_pending(st
spin_unlock_irqrestore(&c->vc.lock, flags);
}
+struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_memcpy(
+ struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ struct bcm2835_desc *d;
+ u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC;
+ u32 extra = BCM2835_DMA_INT_EN | BCM2835_DMA_WAIT_RESP;
+ size_t max_len = bcm2835_dma_max_frame_length(c);
+ size_t frames;
+
+ /* if src, dst or len is not given return with an error */
+ if (!src || !dst || !len)
+ return NULL;
+
+ /* calculate number of frames */
+ frames = bcm2835_dma_frames_for_length(len, max_len);
+
+ /* allocate the CB chain - this also fills in the pointers */
+ d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false,
+ info, extra, frames,
+ src, dst, len, 0, GFP_KERNEL);
+ if (!d)
+ return NULL;
+
+ return vchan_tx_prep(&c->vc, &d->vd, flags);
+}
+
static struct dma_async_tx_descriptor *bcm2835_dma_prep_slave_sg(
struct dma_chan *chan,
struct scatterlist *sgl, unsigned int sg_len,
@@ -880,17 +911,20 @@ static int bcm2835_dma_probe(struct plat
dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask);
dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
+ dma_cap_set(DMA_MEMCPY, od->ddev.cap_mask);
od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources;
od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
od->ddev.device_tx_status = bcm2835_dma_tx_status;
od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg;
+ od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy;
od->ddev.device_config = bcm2835_dma_slave_config;
od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) |
+ BIT(DMA_MEM_TO_MEM);
od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);