Hannu Nyman 7b74b40fe9 ipq806x: remove "firmware" partition definition from netgear routers ... Remove the "firmware" partition definition from the DTS of R7800 to fix sysupgrade. Commit 4645a6d3 defined CONFIG_MTD_SPLIT_UIMAGE_FW=y for ipq806x and that causes mtd to misbehave as additional kernel and ubi partitions are detected from inside the "firmware" partition. [ 1.111324] 0x000001480000-0x000001880000 : "kernel" [ 1.121005] 0x000001880000-0x000007900000 : "ubi" [ 1.283912] 0x000007900000-0x000008000000 : "reserve" [ 1.296407] 0x000001480000-0x000007900000 : "firmware" [ 1.468043] no rootfs found after FIT image in "firmware" [ 2.426860] 2 uimage-fw partitions found on MTD device firmware [ 2.426931] 0x000001480000-0x000001880000 : "kernel" [ 2.440420] 0x000001880000-0x000007900000 : "ubi" Both kernel and ubi are already defined in DTS, so this duplication leads into errors in sysupgrade: Writing from <stdin> to kernel ... ubiattach: error!: strtoul: unable to parse the number '6 mtd10' ubiattach: error!: bad MTD device number: "6 mtd10" The partition is defined to same area as kernel+ubi, and is not needed for sysupgrade anymore. Remove it to fix things. Only tested for the R7800 but all of them should behave equal. Fixes: FS#1617 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [squashed commits, add "tested on" note] Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-06-27 22:11:06 +02:00
..
qcom-ipq8064-ap148.dts
qcom-ipq8064-c2600.dts	ipq806x: remove rpm pinctrl from board dts	2018-05-22 20:34:14 +02:00
qcom-ipq8064-d7800.dts	ipq806x: remove "firmware" partition definition from netgear routers	2018-06-27 22:11:06 +02:00
qcom-ipq8064-db149.dts
qcom-ipq8064-ea8500.dts	ipq806x: remove rpm pinctrl from board dts	2018-05-22 20:34:14 +02:00
qcom-ipq8064-r7500.dts	ipq806x: remove "firmware" partition definition from netgear routers	2018-06-27 22:11:06 +02:00
qcom-ipq8064-r7500v2.dts	ipq806x: remove "firmware" partition definition from netgear routers	2018-06-27 22:11:06 +02:00
qcom-ipq8064-v2.0.dtsi	ipq806x: fix pcie tx termination offset	2018-05-22 20:34:14 +02:00
qcom-ipq8064-vr2600v.dts	ipq806x: remove rpm pinctrl from board dts	2018-05-22 20:34:14 +02:00
qcom-ipq8064-wg2600hp.dts	ipq806x: add support for NEC Aterm WG2600HP	2018-06-19 20:46:01 +02:00
qcom-ipq8064-wpq864.dts
qcom-ipq8064.dtsi	ipq806x: move mmc specific nodes into v1.0 dtsi	2018-05-22 20:34:14 +02:00
qcom-ipq8065-nbg6817.dts	ipq806x: remove rpm pinctrl from board dts	2018-05-22 20:34:14 +02:00
qcom-ipq8065-r7800.dts	ipq806x: remove "firmware" partition definition from netgear routers	2018-06-27 22:11:06 +02:00
qcom-ipq8065.dtsi	ipq806x: move mmc specific nodes into v1.0 dtsi	2018-05-22 20:34:14 +02:00