openwrtv3/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
Chuanhong Guo c463320812 ath79: Remove all memory nodes defined in dts
This target can automatically detect the correct memory size and we've
been using it for long in ar71xx.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-06-28 18:39:57 +02:00

212 lines
3.3 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
compatible = "netgear,wndr3800", "qca,ar7161";
model = "Netgear WNDR3800";
aliases {
led-status = &power_green;
};
chosen {
bootargs = "console=ttyS0,115200";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
reset-leds {
compatible = "reset-leds";
usb_led {
label = "netgear:green:usb";
resets = <&rst 12>;
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "netgear:orange:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
power_green: power_green {
label = "netgear:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
power_orange {
label = "netgear:orange:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
mdio-bus {
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
};
&usb_phy {
status = "okay";
};
&usb1 {
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l12805d";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
read-only;
};
partition@2 {
label = "firmware";
reg = <0x070000 0xf80000>;
};
art: partition@3 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x06>;
resets = <&rst 13>;
reset-names = "mac";
phy-handle = <&phy4>;
};