openwrtv3/target/linux/malta
Mathias Kresin 80c61c161a treewide: use wpad-basic for not small flash targets
Add out of the box support for 802.11r and 802.11w to all targets not
suffering from small flash.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Mathias did all the heavy lifting on this, but I'm the one who should
get shouted at for committing.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 15:07:41 +01:00
..
base-files/etc image / basefiles: make console password configurable 2016-04-18 21:53:07 +02:00
be malta: upgrade to kernel 4.9 2017-10-15 14:22:01 +02:00
be64 malta: upgrade to kernel 4.9 2017-10-15 14:22:01 +02:00
image treewide: do not use IMG_PREFIX in Image/Prepare 2017-10-26 12:26:25 +02:00
le malta: upgrade to kernel 4.9 2017-10-15 14:22:01 +02:00
le64 malta: upgrade to kernel 4.9 2017-10-15 14:22:01 +02:00
config-4.14 malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
Makefile treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
README malta: fix image prefix names 2018-01-09 10:26:16 +01:00

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.