No description
Find a file
John Crispin f45132d1d4 Codel: avoid a nul rec_inv_sqrt
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
2012-08-02 13:39:50 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include fix up scons vs ccache 2012-07-28 21:06:59 +00:00
package uclibc++: update to 0.2.4 2012-08-01 12:01:24 +00:00
scripts build: ensure that reordering of KCONFIG lines are handled properly and that the final result does not depend on the package scan order 2012-07-22 21:00:07 +00:00
target Codel: avoid a nul rec_inv_sqrt 2012-08-02 13:39:50 +00:00
toolchain kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x 2012-07-20 12:28:50 +00:00
tools add mktools and dosfstools which are needed for the raspberry pi 2012-07-24 20:39:00 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in config: tag parallel build options with high build breakage probability with a BROKEN dependency to discourage users from spamming us with tickets about them 2012-06-30 21:44:12 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk fix up scons vs ccache 2012-07-28 21:06:59 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org