No description
Find a file
John Crispin ef4f5a06d1 remove dbg printk from pci code
SVN-Revision: 9847
2007-12-22 21:17:09 +00:00
docs Allow specifying static IPv6 gateways (#2710) 2007-11-16 07:27:59 +00:00
include added packkage-version overriding, Signed-off-by: ralph <ralph.hempel@infineon.com> 2007-12-20 22:20:32 +00:00
package sync with madwifi changeset 3070 2007-12-22 16:17:17 +00:00
scripts Add the ADAM2 flashing script (#2780) 2007-12-16 13:26:01 +00:00
target remove dbg printk from pci code 2007-12-22 21:17:09 +00:00
toolchain added binutils 2.18 selection, Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> 2007-12-20 22:23:12 +00:00
tools Prevent the use of underscores in package names (#2801) 2007-12-13 10:53:57 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in fix rootfs size selection 2007-12-20 01:53:13 +00:00
feeds.conf add initial version of a package feeds management script 2007-09-23 02:39:01 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile fix make clean for unconfigured build trees 2007-12-04 03:04:37 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
rules.mk hopefully fix occasional uClibc/gcc build failures 2007-12-13 01:17:26 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org