ZengFei Zhang edae3479e6 ramips: add support for HiWiFi HC5962 ... This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>		2017-02-28 23:46:02 +01:00
..
board.d	ramips: add support for HiWiFi HC5962	2017-02-28 23:46:02 +01:00
hotplug.d	ramips: use the ralink,mtd-eeprom device tree property	2016-11-09 20:22:59 +01:00
init.d	ramips: enablemodem: move /lib/ramips.sh to start()	2016-12-24 06:51:59 +01:00
uci-defaults	ramips: use rfkill for wps button on wlan only boards	2016-10-15 09:01:45 +02:00
diag.sh	ramips: add support for HiWiFi HC5962	2017-02-28 23:46:02 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00