openwrtv3/target/linux/kirkwood/base-files/etc/board.d/02_network
Alberto Bursi 4383c13aee kirkwood: add ZyXEL NSA325 device
This patch add ZyXEL NSA325 2-Bay Media Server

The ZyXEL NSA325 device is a Kirkwood based NAS:

- SoC: Marvell 88F6702 1600Mhz
- SDRAM memory: 512MB DDR2 400Mhz
- Gigabit ethernet: Marvell Alaska
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II ports (internal)
- 2 USB 2.0 ports (back)
- 1 USB 3.0 port (front)
- Fan (fixed speed)
- hardware watchdog in a mcu

Basically a bigger, more powerful version of NSA310,
installation is the same as they share the same flash layout.

A notable difference is that there is a hardware watchdog
in a mcu on the board, which is disabled by default in the LEDE u-boot.
The watchdog is also disabled with a GPIO activation through
raw register change when kwbooting or it would reset the board before
the new uboot was transferred.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-11 21:16:28 +01:00

44 lines
760 B
Bash
Executable file

#!/bin/sh
#
# Copyright (C) 2012-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/kirkwood.sh
board_config_update
board=$(kirkwood_board_name)
case "$board" in
"dockstar"|\
"goflexhome"|\
"goflexnet"|\
"ib62x0"|\
"iconnect"|\
"nsa310s"|\
"pogo_e02"|\
"sheevaplug"|\
"sheevaplug-esata")
ucidef_set_interface_lan "eth0" "dhcp"
;;
"guruplug-server-plus")
ucidef_set_interface_lan "eth0 eth1" "dhcp"
;;
"linksys-audi"|\
"linksys-viper")
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1"
;;
"nsa310b"|"nsa325")
ucidef_set_interface_lan "eth0" "dhcp"
ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr )
;;
*)
ucidef_set_interface_lan "eth0"
;;
esac
board_config_flush
exit 0