KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux
History
Chuanhong Guo ed40173dfc ramips: Add support for Phicomm K2G 
Specification:
- SoC: MediaTek MT7620A
- Flash: 8 MB
- RAM: 64 MB
- Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5)
- Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA.
- UART: 1 x UART on PCB - 57600 8N1

Flash instruction:
The U-boot is based on Ralink SDK so we can flash the firmware using UART:
1. Configure PC with a static IP address and setup an TFTP server.
2. Put the firmware into the tftp directory.
3. Connect the UART line as described on the PCB.
4. Power up the device and press 2, follow the instruction to
   set device and tftp server IP address and input the firmware
   file name. U-boot will then load the firmware and write it into
   the flash.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-06-21 22:00:02 +02:00
..
adm5120 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
adm8668 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
apm821xx kernel: bump 4.14 to 4.14.48 2018-06-05 22:54:00 +03:00
ar7 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ar71xx ar71xx: add support for TP-LINK Archer C7 v5 2018-06-20 15:36:19 +02:00
arc770 arc770: bump kernel to 4.14 2018-06-19 14:32:47 +02:00
archs38 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
armvirt arm64: enable harden branch predictor 2018-04-27 21:34:18 +02:00
at91 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-22 07:20:13 +02:00
ath79 ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
au1000 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
bcm53xx bcm53xx: exit if writing kernel during sysupgrade fails 2018-06-18 13:47:08 +02:00
brcm47xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
brcm63xx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
brcm2708 brcm2708: Add wifi driver, firmware and NVRAM for Raspberry Pi 3 b 2018-06-20 21:50:14 +02:00
cns3xxx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
gemini gemini: Cook SQ201 images 2018-06-18 06:35:33 +02:00
generic mips: fix dynamic ftrace 2018-06-18 20:29:26 +02:00
imx6 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
ipq40xx ipq40xx: add support for ZyXEL WRE6606 2018-06-18 18:21:20 +02:00
ipq806x ipq806x: add support for NEC Aterm WG2600HP 2018-06-19 20:46:01 +02:00
ixp4xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
kirkwood kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
lantiq lantiq: atm: fix ifx_atm driver integration 2018-06-18 15:26:41 +02:00
layerscape kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mcs814x kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
mediatek mediatek: mt7622: Do not deactivate CONFIG_BLK_DEV 2018-06-18 07:10:19 +02:00
mpc85xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
mvebu mvebu: enable CONFIG_HW_RANDOM 2018-06-18 20:29:38 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
octeon octeon: Add and set CPU type Octeon+ as default 2018-06-20 15:36:02 +02:00
octeontx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
omap kernel: enable EXPORTFS by default 2018-05-22 07:55:05 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas kernel: bump 4.14 to 4.14.48 2018-06-05 22:54:00 +03:00
pistachio kernel: bump 4.14 to 4.14.42 2018-05-22 20:49:08 +02:00
ppc40x treewide: drop target board_name functions 2017-07-15 23:13:34 +02:00
ppc44x ppc44x: mark as broken 2017-01-10 12:49:34 +01:00
ramips ramips: Add support for Phicomm K2G 2018-06-21 22:00:02 +02:00
rb532 treewide: move nand_do_upgrade call to platform_do_upgrade 2018-02-16 14:44:02 +01:00
sunxi kernel: bump 4.9 to 4.9.108 2018-06-18 07:10:19 +02:00
uml kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
x86 kernel: bump 4.9 to 4.9.106 2018-06-07 09:04:46 +02:00
xburst kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
zynq zynq: remove support for kernel 4.4 2018-06-07 09:00:49 +02:00
Makefile