openwrtv3/target/linux/lantiq/dts/VGV7519.dtsi

#include "vr9.dtsi"

/ {

    model = "VGV7519 - KPN Experiabox V8";

	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
	};

	aliases {
		led-boot = &power_green;
		led-failsafe = &power_red;
		led-running = &power_green;

		led-dsl = &broadband_green;
		led-internet = &internet_green;
		led-wifi = &wireless_green;
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};

	cputemp@0 {
		compatible = "lantiq,cputemp";
	};

	fpi@10000000 {
		localbus@0 {
			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					boardconfig: partition@40000 {
						label = "board_config";
						reg = <0x40000 0x10000>;
						read-only;
					};
				};
			};
		};

		gpio: pinmux@E100B10 {
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			state_default: pinmux {
				stp {
					lantiq,groups = "stp";
					lantiq,function = "stp";
					lantiq,open-drain = <0>;
					lantiq,output = <1>;
					lantiq,pull = <0>;
				};
				mdio {
					lantiq,groups = "mdio";
					lantiq,function = "mdio";
				};
				pci-rst {
					lantiq,pins = "io21";
					lantiq,open-drain = <0>;
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
				gphy-leds {
					lantiq,groups = "gphy0 led1", "gphy1 led0";
					lantiq,function = "gphy";
					lantiq,open-drain = <0>;
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
			};
		};

		stp: stp@E100BB0 {
			compatible = "lantiq,gpio-stp-xway";
			reg = <0xE100BB0 0x40>;
			#gpio-cells = <2>;
			gpio-controller;

			lantiq,shadow = <0xffff>;
			lantiq,groups = <0x3>;
			lantiq,dsl = <0x0>;
			lantiq,phy1 = <0x0>;
			lantiq,phy2 = <0x0>;
			/* lantiq,rising; */
		};

		ifxhcd@E101000 {
			status = "okay";
			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
			lantiq,portmask = <0x3>;
		};

		ifxhcd@E106000 {
			status = "okay";
			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
		};

		pci@E105400 {
			status = "okay";
			lantiq,bus-clock = <33333333>;
			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <
				0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
				>;
			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
			req-mask = <0x1>;	/* GNT1 */
		};

		pcie@d900000 {
			status = "disabled";
		};
	};

	gphy-xrx200 {
		compatible = "lantiq,phy-xrx200";
		firmware1 = "lantiq/vr9_phy11g_a1x.bin";	/*VR9 1.1*/
		firmware2 = "lantiq/vr9_phy11g_a2x.bin";	/*VR9 1.2*/
		phys = [ 00 01 ];
	};

	ralink_eep {
		compatible = "ralink,eeprom";
		ralink,eeprom = "RT2860.eeprom";
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;
		reset {
			label = "reset";
			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
		eco {
			label = "eco";
			gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};
		rfkill {
			label = "rfkill";
			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};
		wps {
			label = "wps";
			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		eco {
			label = "vgv7519:blue:eco";
			gpios = <&stp 2 GPIO_ACTIVE_LOW>;
		};
		wps_red {
			label = "vgv7519:red:wps";
			gpios = <&stp 3 GPIO_ACTIVE_LOW>;
		};
		wps_green {
			label = "vgv7519:green:wps";
			gpios = <&stp 4 GPIO_ACTIVE_LOW>;
		};
		upgrade {
			label = "vgv7519:blue:upgrade";
			gpios = <&stp 5 GPIO_ACTIVE_LOW>;
		};
		tv {
			label = "vgv7519:green:tv";
			gpios = <&stp 6 GPIO_ACTIVE_LOW>;
		};
		internet_green: internet_green {
			label = "vgv7519:green:internet";
			gpios = <&stp 7 GPIO_ACTIVE_LOW>;
		};
		internet_red {
			label = "vgv7519:red:internet";
			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
		};
		broadband_red {
			label = "vgv7519:red:broadband";
			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
		};
		broadband_green: broadband_green {
			label = "vgv7519:green:broadband";
			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
		};
		voice {
			label = "vgv7519:green:voice";
			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
		};
		wireless_red {
			label = "vgv7519:red:wireless";
			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
		};
		wireless_green: wireless_green {
			label = "vgv7519:green:wireless";
			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
		};
		power_green: power2 {
			label = "vgv7519:green:power";
			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
		power_red: power {
			label = "vgv7519:red:power";
			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
		};
	};
};

&eth0 {
	lan: interface@0 {
		compatible = "lantiq,xrx200-pdi";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0>;
		mtd-mac-address = <&boardconfig 0x16>;
		lantiq,switch;

		ethernet@0 {
			compatible = "lantiq,xrx200-pdi-port";
			reg = <0>;
			phy-mode = "rgmii";
			phy-handle = <&phy0>;
		};
		ethernet@1 {
			compatible = "lantiq,xrx200-pdi-port";
			reg = <1>;
			phy-mode = "rgmii";
			phy-handle = <&phy1>;
		};
		ethernet@2 {
			compatible = "lantiq,xrx200-pdi-port";
			reg = <2>;
			phy-mode = "gmii";
			phy-handle = <&phy11>;
		};
		ethernet@4 {
			compatible = "lantiq,xrx200-pdi-port";
			reg = <4>;
			phy-mode = "gmii";
			phy-handle = <&phy13>;
		};
	};

	wan: interface@1 {
		compatible = "lantiq,xrx200-pdi";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <1>;
		mtd-mac-address = <&boardconfig 0x16>;
		mtd-mac-address-increment = <2>;
		lantiq,wan;

		ethernet@5 {
			compatible = "lantiq,xrx200-pdi-port";
			reg = <5>;
			phy-mode = "rgmii";
			phy-handle = <&phy5>;
		};
	};

	mdio@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "lantiq,xrx200-mdio";
		phy0: ethernet-phy@0 {
			reg = <0x0>;
			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
		};
		phy1: ethernet-phy@1 {
			reg = <0x1>;
			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
		};
		phy5: ethernet-phy@5 {
			reg = <0x5>;
			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
		};
		phy11: ethernet-phy@11 {
			reg = <0x11>;
			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
		};
		phy13: ethernet-phy@13 {
			reg = <0x13>;
			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
		};
	};
};