openwrtv3/target/linux/lantiq/dts/ARV4520PW.dts
Andreas Eberlein eba84bee4c lantiq: Sanitize device tree files
The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes.

This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend.

Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
[sanitize all device tree files]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:55:04 +02:00

219 lines
4.1 KiB
Text

/dts-v1/;
#include "danube.dtsi"
/ {
model = "ARV4520PW - Easybox 800, WAV-281";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_blue;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &dsl;
led-internet = &internet_blue;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH
&gpiomm 7 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "firmware";
reg = <0x30000 0x3c0000>;
};
boardconfig: partition@7f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x400>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
// gpiomm 10 - switch
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power {
label = "arv4520pw:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl: dsl {
label = "arv4520pw:blue:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet_blue: internet {
label = "arv4520pw:blue:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "arv4520pw:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv4520pw:yellow:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv4520pw:red:wps";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
/*
wps green is missing
*/
fxs1 {
label = "arv4520pw:blue:telefon1";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv4520pw:blue:telefon2";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
isdn {
label = "arv4520pw:blue:isdn";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv4520pw:blue:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv4520pw:blue:sprache";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "arv4520pw:blue:usb";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv4520pw:blue:wifi";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "arv4520pw:red:internet";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
/*
info is missing
*/
};
};