openwrtv3/target/linux/brcm2708/patches-4.9/950-0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

192 lines
6 KiB
Diff

From 965475a1620ba1c4f19d6585925a40e3c749d7d1 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 20 Jun 2016 13:51:44 +0100
Subject: [PATCH] vchiq_arm: Avoid use of mutex in add_completion
Claiming the completion_mutex within add_completion did prevent some
messages appearing twice, but provokes a deadlock caused by vcsm using
vchiq within a page fault handler.
Revert the use of completion_mutex, and instead fix the original
problem using more memory barriers.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
.../vc04_services/interface/vchiq_arm/vchiq_arm.c | 55 +++++++++++-----------
.../vc04_services/interface/vchiq_arm/vchiq_core.c | 14 ++++--
2 files changed, 37 insertions(+), 32 deletions(-)
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -64,10 +64,10 @@
#define VCHIQ_MINOR 0
/* Some per-instance constants */
-#define MAX_COMPLETIONS 16
+#define MAX_COMPLETIONS 128
#define MAX_SERVICES 64
#define MAX_ELEMENTS 8
-#define MSG_QUEUE_SIZE 64
+#define MSG_QUEUE_SIZE 128
#define KEEPALIVE_VER 1
#define KEEPALIVE_VER_MIN KEEPALIVE_VER
@@ -208,28 +208,24 @@ add_completion(VCHIQ_INSTANCE_T instance
void *bulk_userdata)
{
VCHIQ_COMPLETION_DATA_T *completion;
+ int insert;
DEBUG_INITIALISE(g_state.local)
- mutex_lock(&instance->completion_mutex);
-
- while (instance->completion_insert ==
- (instance->completion_remove + MAX_COMPLETIONS)) {
+ insert = instance->completion_insert;
+ while ((insert - instance->completion_remove) >= MAX_COMPLETIONS) {
/* Out of space - wait for the client */
DEBUG_TRACE(SERVICE_CALLBACK_LINE);
vchiq_log_trace(vchiq_arm_log_level,
"add_completion - completion queue full");
DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT);
- mutex_unlock(&instance->completion_mutex);
if (down_interruptible(&instance->remove_event) != 0) {
vchiq_log_info(vchiq_arm_log_level,
"service_callback interrupted");
return VCHIQ_RETRY;
}
- mutex_lock(&instance->completion_mutex);
if (instance->closing) {
- mutex_unlock(&instance->completion_mutex);
vchiq_log_info(vchiq_arm_log_level,
"service_callback closing");
return VCHIQ_SUCCESS;
@@ -237,9 +233,7 @@ add_completion(VCHIQ_INSTANCE_T instance
DEBUG_TRACE(SERVICE_CALLBACK_LINE);
}
- completion =
- &instance->completions[instance->completion_insert &
- (MAX_COMPLETIONS - 1)];
+ completion = &instance->completions[insert & (MAX_COMPLETIONS - 1)];
completion->header = header;
completion->reason = reason;
@@ -260,12 +254,9 @@ add_completion(VCHIQ_INSTANCE_T instance
wmb();
if (reason == VCHIQ_MESSAGE_AVAILABLE)
- user_service->message_available_pos =
- instance->completion_insert;
-
- instance->completion_insert++;
+ user_service->message_available_pos = insert;
- mutex_unlock(&instance->completion_mutex);
+ instance->completion_insert = ++insert;
up(&instance->insert_event);
@@ -795,6 +786,7 @@ vchiq_ioctl(struct file *file, unsigned
instance->completion_insert)
&& !instance->closing) {
int rc;
+
DEBUG_TRACE(AWAIT_COMPLETION_LINE);
mutex_unlock(&instance->completion_mutex);
rc = down_interruptible(&instance->insert_event);
@@ -809,24 +801,29 @@ vchiq_ioctl(struct file *file, unsigned
}
DEBUG_TRACE(AWAIT_COMPLETION_LINE);
- /* A read memory barrier is needed to stop prefetch of a stale
- ** completion record
- */
- rmb();
-
if (ret == 0) {
int msgbufcount = args.msgbufcount;
+ int remove;
+
+ remove = instance->completion_remove;
+
for (ret = 0; ret < args.count; ret++) {
VCHIQ_COMPLETION_DATA_T *completion;
VCHIQ_SERVICE_T *service;
USER_SERVICE_T *user_service;
VCHIQ_HEADER_T *header;
- if (instance->completion_remove ==
- instance->completion_insert)
+
+ if (remove == instance->completion_insert)
break;
+
completion = &instance->completions[
- instance->completion_remove &
- (MAX_COMPLETIONS - 1)];
+ remove & (MAX_COMPLETIONS - 1)];
+
+
+ /* A read memory barrier is needed to prevent
+ ** the prefetch of a stale completion record
+ */
+ rmb();
service = completion->service_userdata;
user_service = service->base.userdata;
@@ -903,7 +900,11 @@ vchiq_ioctl(struct file *file, unsigned
break;
}
- instance->completion_remove++;
+ /* Ensure that the above copy has completed
+ ** before advancing the remove pointer. */
+ mb();
+
+ instance->completion_remove = ++remove;
}
if (msgbufcount != args.msgbufcount) {
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -610,15 +610,15 @@ process_free_queue(VCHIQ_STATE_T *state)
BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)];
int slot_queue_available;
- /* Use a read memory barrier to ensure that any state that may have
- ** been modified by another thread is not masked by stale prefetched
- ** values. */
- rmb();
-
/* Find slots which have been freed by the other side, and return them
** to the available queue. */
slot_queue_available = state->slot_queue_available;
+ /* Use a memory barrier to ensure that any state that may have been
+ ** modified by another thread is not masked by stale prefetched
+ ** values. */
+ mb();
+
while (slot_queue_available != local->slot_queue_recycle) {
unsigned int pos;
int slot_index = local->slot_queue[slot_queue_available++ &
@@ -626,6 +626,8 @@ process_free_queue(VCHIQ_STATE_T *state)
char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index);
int data_found = 0;
+ rmb();
+
vchiq_log_trace(vchiq_core_log_level, "%d: pfq %d=%x %x %x",
state->id, slot_index, (unsigned int)data,
local->slot_queue_recycle, slot_queue_available);
@@ -741,6 +743,8 @@ process_free_queue(VCHIQ_STATE_T *state)
up(&state->data_quota_event);
}
+ mb();
+
state->slot_queue_available = slot_queue_available;
up(&state->slot_available_event);
}