openwrtv3/target/linux/brcm2708/patches-4.9/950-0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

100 lines
3 KiB
Diff

From e4f0f7daebca7005c67bf7ae3f6f59df587e91d5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Sat, 3 Oct 2015 22:22:55 +0200
Subject: [PATCH] dmaengine: bcm2835: Load driver early and support legacy API
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Load driver early since at least bcm2708_fb doesn't support deferred
probing and even if it did, we don't want the video driver deferred.
Support the legacy DMA API which is needed by bcm2708_fb.
Don't mask out channel 2.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/dma/Kconfig | 2 +-
drivers/dma/bcm2835-dma.c | 26 +++++++++++++++++++++++++-
2 files changed, 26 insertions(+), 2 deletions(-)
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -108,7 +108,7 @@ config COH901318
config DMA_BCM2835
tristate "BCM2835 DMA engine support"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -37,6 +37,7 @@
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/platform_data/dma-bcm2708.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
@@ -48,6 +49,7 @@
#define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
#define BCM2835_DMA_CHAN_NAME_SIZE 8
+#define BCM2835_DMA_BULK_MASK BIT(0)
struct bcm2835_dmadev {
struct dma_device ddev;
@@ -922,6 +924,9 @@ static int bcm2835_dma_probe(struct plat
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
+ rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK);
+ if (rc)
+ dev_err(&pdev->dev, "Failed to initialize the legacy API\n");
od->base = base;
@@ -959,6 +964,9 @@ static int bcm2835_dma_probe(struct plat
goto err_no_dma;
}
+ /* Channel 0 is used by the legacy API */
+ chans_available &= ~BCM2835_DMA_BULK_MASK;
+
/* get irqs for each channel that we support */
for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
/* skip masked out channels */
@@ -1033,6 +1041,7 @@ static int bcm2835_dma_remove(struct pla
{
struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
+ bcm_dmaman_remove(pdev);
dma_async_device_unregister(&od->ddev);
bcm2835_dma_free(od);
@@ -1048,7 +1057,22 @@ static struct platform_driver bcm2835_dm
},
};
-module_platform_driver(bcm2835_dma_driver);
+static int bcm2835_dma_init(void)
+{
+ return platform_driver_register(&bcm2835_dma_driver);
+}
+
+static void bcm2835_dma_exit(void)
+{
+ platform_driver_unregister(&bcm2835_dma_driver);
+}
+
+/*
+ * Load after serial driver (arch_initcall) so we see the messages if it fails,
+ * but before drivers (module_init) that need a DMA channel.
+ */
+subsys_initcall(bcm2835_dma_init);
+module_exit(bcm2835_dma_exit);
MODULE_ALIAS("platform:bcm2835-dma");
MODULE_DESCRIPTION("BCM2835 DMA engine driver");