openwrtv3/target/linux/brcm2708/patches-4.4/0148-Updated-smsc95xx-driver-to-check-for-a-valid-MAC-add.patch
Álvaro Fernández Rojas a8d4d71c41 brcm2708: update to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-07 21:25:10 +02:00

40 lines
1.7 KiB
Diff

From 55e8519aa4c86b37f1933e8e53c6e97372d61871 Mon Sep 17 00:00:00 2001
From: Craig Roberts <cjr@craigroberts.net>
Date: Tue, 16 Feb 2016 10:03:42 +0000
Subject: [PATCH 148/232] Updated smsc95xx driver to check for a valid MAC
address in eeprom before using smsc95xx.macaddr parameter passed on command
line.
The built-in RPi adaptor will still get a MAC address based on the parameter passed on the command line as the RPi hardware does not have an eeprom,
however usb->ethernet adaptors using the same driver should have an eeprom with MAC address as part of their hardware and therefore will use this
meaning they don't end up with the same MAC address as the built-in RPi adaptor.
---
drivers/net/usb/smsc95xx.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -817,10 +817,6 @@ static int smsc95xx_is_macaddr_param(str
static void smsc95xx_init_mac_address(struct usbnet *dev)
{
- /* Check module parameters */
- if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
- return;
-
/* try reading mac address from EEPROM */
if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
dev->net->dev_addr) == 0) {
@@ -831,7 +827,11 @@ static void smsc95xx_init_mac_address(st
}
}
- /* no eeprom, or eeprom values are invalid. generate random MAC */
+ /* Check module parameters */
+ if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
+ return;
+
+ /* no eeprom, or eeprom values are invalid, and no module parameter specified to set MAC. Generate random MAC */
eth_hw_addr_random(dev->net);
netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
}