openwrtv3/target/linux/mvebu/patches-4.9/424-net-mvneta-add-flow-control-support-via-phylink.patch
Koen Vandeputte 62ede4f783 kernel: bump 4.9 to 4.9.63
Refreshed all patches.

Removed upstreamed parts.

Compile-tested: cns3xxx, imx6, mvebu, layerscape
Run-tested: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-11-22 20:45:52 +01:00

76 lines
2.5 KiB
Diff

From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 1 Oct 2015 17:41:44 +0100
Subject: [PATCH] net: mvneta: add flow control support via phylink
Add flow control support to mvneta, including the ethtool hooks. This
uses the phylink code to calculate the result of autonegotiation where
a phy is attached, and to handle the ethtool settings.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3179,6 +3179,12 @@ static int mvneta_mac_link_state(struct
state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
+ state->pause = 0;
+ if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_RX;
+ if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_TX;
+
return 1;
}
@@ -3221,6 +3227,8 @@ static void mvneta_mac_config(struct net
if (phylink_test(state->advertising, Pause))
new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
+ if (state->pause & MLO_PAUSE_TXRX_MASK)
+ new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
switch (mode) {
case MLO_AN_SGMII:
@@ -3245,7 +3253,7 @@ static void mvneta_mac_config(struct net
/* The MAC only supports FD mode */
MVNETA_GMAC_CONFIG_FULL_DUPLEX;
- if (state->an_enabled)
+ if (state->pause & MLO_PAUSE_AN && state->an_enabled)
new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
break;
@@ -3711,6 +3719,22 @@ static int mvneta_ethtool_set_ringparam(
return 0;
}
+static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pause)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ phylink_ethtool_get_pauseparam(pp->phylink, pause);
+}
+
+static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pause)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ return phylink_ethtool_set_pauseparam(pp->phylink, pause);
+}
+
static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
u8 *data)
{
@@ -3902,6 +3926,8 @@ const struct ethtool_ops mvneta_eth_tool
.get_drvinfo = mvneta_ethtool_get_drvinfo,
.get_ringparam = mvneta_ethtool_get_ringparam,
.set_ringparam = mvneta_ethtool_set_ringparam,
+ .get_pauseparam = mvneta_ethtool_get_pauseparam,
+ .set_pauseparam = mvneta_ethtool_set_pauseparam,
.get_strings = mvneta_ethtool_get_strings,
.get_ethtool_stats = mvneta_ethtool_get_stats,
.get_sset_count = mvneta_ethtool_get_sset_count,