openwrtv3/target/linux/lantiq/dts/ARV4518PWR01.dts
John Crispin 157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00

192 lines
3.1 KiB
Text

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV4518PWR01 - SMC7908A-ISP";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>; /* 64 KB */
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>; /* 64 KB */
read-only;
};
partition@20000 {
label = "linux";
reg = <0x20000 0x3d0000>;
};
partition@400000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x0>;
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
mac-increment = <2>;
};
ath5k_eep {
compatible = "ath5k,eeprom";
reg = <0 0x3f0400 0x800
0 0x3f0016 0x6>;
ath,mac-increment = <1>;
ath,eep-swap;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 0>;
};
pci@E105400 {
status = "okay";
lantiq,internal-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>;
};
};
/*
#define ARV4518PW_SWITCH_RESET 13
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 1>;
linux,code = <0xf7>;
};
reset {
label = "reset";
gpios = <&gpio 30 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&gpio 3 0>;
};
dsl {
label = "dsl";
gpios = <&gpio 4 1>;
};
online {
label = "online";
gpios = <&gpio 5 1>;
};
wifi {
label = "wifi";
gpios = <&gpio 6 1>;
};
wps {
label = "wps";
gpios = <&gpio 7 1>;
};
dsl2 {
label = "dsl2";
gpios = <&gpio 8 1>;
};
usb {
label = "usb";
gpios = <&gpio 19 1>;
};
voice {
label = "voice";
gpios = <&gpiomm 0 1>;
};
fxs1 {
label = "fxs1";
gpios = <&gpiomm 1 1>;
};
fxs2 {
label = "fxs2";
gpios = <&gpiomm 2 1>;
};
fxo {
label = "fxo";
gpios = <&gpiomm 3 1>;
};
};
};