No description
Find a file
Gabor Juhos e57546de83 ramips: raeth: use netdev_alloc_skb
SVN-Revision: 30554
2012-02-15 18:33:41 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure 2012-02-13 15:31:28 +00:00
package ath9k: prevent writes to const data on AR9160 2012-02-15 18:02:57 +00:00
scripts patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that 2012-01-29 20:19:06 +00:00
target ramips: raeth: use netdev_alloc_skb 2012-02-15 18:33:41 +00:00
toolchain gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary 2012-02-12 20:25:47 +00:00
tools Support booting the Speedport W502V using BRN-BOOT. 2012-02-14 17:48:04 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in if CONFIG_BUILD_NLS is selected, compile uClibc with locale support 2012-01-01 15:11:11 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems 2012-01-29 23:34:25 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org