openwrtv3/target/linux/ath79/patches-4.14/0026-MIPS-ath79-sanitize-Kconfig-symbols.patch
Koen Vandeputte e2aa0c3f8b kernel: bump 4.14 to 4.14.41
Refreshed all patches

Dropped upstreamed patches:
522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch
523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch
525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch

updated patches:
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch

Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718

Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-05-18 09:10:46 +02:00

111 lines
2.6 KiB
Diff

From deda44895d289a72a235359fc21f8a62ea44dc1c Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 6 Mar 2018 09:33:26 +0100
Subject: [PATCH 26/27] MIPS: ath79: sanitize Kconfig symbols
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/Kconfig | 2 ++
arch/mips/ath79/Kconfig | 48 +++++-------------------------------------------
arch/mips/ath79/Makefile | 10 ----------
arch/mips/pci/Makefile | 2 +-
4 files changed, 8 insertions(+), 54 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -203,6 +203,8 @@ config ATH79
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
+ select HW_HAS_PCI
+ select USB_ARCH_HAS_EHCI
select USE_OF
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1,52 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
if ATH79
-config SOC_AR71XX
- select HW_HAS_PCI
- def_bool n
-
-config SOC_AR724X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_AR913X
- def_bool n
-
-config SOC_AR933X
- def_bool n
-
-config SOC_AR934X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_QCA953X
- select USB_ARCH_HAS_EHCI
- def_bool n
-
-config SOC_QCA955X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
+config PCI_AR71XX
+ bool "PCI support for AR7100 type SoCs"
+ depends on PCI
def_bool n
config PCI_AR724X
- def_bool n
-
-config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
-config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-config ATH79_DEV_SPI
- def_bool n
-
-config ATH79_DEV_USB
- def_bool n
-
-config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
+ bool "PCI support for AR724x type SoCs"
+ depends on PCI
def_bool n
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -11,13 +11,3 @@
obj-y := prom.o setup.o common.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-#
-# Devices
-#
-obj-y += dev-common.o
-obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
-obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
-obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
-obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
#