openwrtv3/package/mac80211/patches/300-pending_work.patch
2012-01-07 20:54:33 +00:00

1381 lines
42 KiB
Diff

--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -203,7 +203,7 @@ static void ar9002_hw_iqcalibrate(struct
i);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+ "Original: Chn %d iq_corr_meas = 0x%08x\n",
i, ah->totalIqCorrMeas[i]);
iqCorrNeg = 0;
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -226,7 +226,7 @@ static void ar9003_hw_iqcalibrate(struct
i);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+ "Original: Chn %d iq_corr_meas = 0x%08x\n",
i, ah->totalIqCorrMeas[i]);
iqCorrNeg = 0;
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -808,7 +808,8 @@ void ath9k_htc_ani_work(struct work_stru
}
/* Verify whether we must check ANI */
- if ((timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
+ if (ah->config.enable_ani &&
+ (timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
aniflag = true;
common->ani.checkani_timer = timestamp;
}
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -504,7 +504,7 @@ static int ath9k_hw_post_init(struct ath
return ecode;
}
- if (!AR_SREV_9100(ah) && !AR_SREV_9340(ah)) {
+ if (ah->config.enable_ani) {
ath9k_hw_ani_setup(ah);
ath9k_hw_ani_init(ah);
}
@@ -610,6 +610,10 @@ static int __ath9k_hw_init(struct ath_hw
if (!AR_SREV_9300_20_OR_LATER(ah))
ah->ani_function &= ~ATH9K_ANI_MRC_CCK;
+ /* disable ANI for 9340 */
+ if (AR_SREV_9340(ah))
+ ah->config.enable_ani = false;
+
ath9k_hw_init_mode_regs(ah);
if (!ah->is_pciexpress)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -118,7 +118,7 @@ void ath9k_ps_restore(struct ath_softc *
if (--sc->ps_usecount != 0)
goto unlock;
- if (sc->ps_idle)
+ if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
mode = ATH9K_PM_FULL_SLEEP;
else if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
@@ -286,7 +286,7 @@ static bool ath_complete_reset(struct at
ath_start_ani(common);
}
- if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) {
+ if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) {
struct ath_hw_antcomb_conf div_ant_conf;
u8 lna_conf;
@@ -332,7 +332,8 @@ static int ath_reset_internal(struct ath
hchan = ah->curchan;
}
- if (fastcc && !ath9k_hw_check_alive(ah))
+ if (fastcc && (ah->chip_fullsleep ||
+ !ath9k_hw_check_alive(ah)))
fastcc = false;
if (!ath_prepare_reset(sc, retry_tx, flush))
@@ -561,7 +562,6 @@ void ath_ani_calibrate(unsigned long dat
/* Long calibration runs independently of short calibration. */
if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
longcal = true;
- ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
common->ani.longcal_timer = timestamp;
}
@@ -569,8 +569,6 @@ void ath_ani_calibrate(unsigned long dat
if (!common->ani.caldone) {
if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
shortcal = true;
- ath_dbg(common, ATH_DBG_ANI,
- "shortcal @%lu\n", jiffies);
common->ani.shortcal_timer = timestamp;
common->ani.resetcal_timer = timestamp;
}
@@ -584,8 +582,9 @@ void ath_ani_calibrate(unsigned long dat
}
/* Verify whether we must check ANI */
- if ((timestamp - common->ani.checkani_timer) >=
- ah->config.ani_poll_interval) {
+ if (sc->sc_ah->config.enable_ani
+ && (timestamp - common->ani.checkani_timer) >=
+ ah->config.ani_poll_interval) {
aniflag = true;
common->ani.checkani_timer = timestamp;
}
@@ -605,6 +604,11 @@ void ath_ani_calibrate(unsigned long dat
ah->rxchainmask, longcal);
}
+ ath_dbg(common, ATH_DBG_ANI,
+ "Calibration @%lu finished: %s %s %s, caldone: %s\n", jiffies,
+ longcal ? "long" : "", shortcal ? "short" : "",
+ aniflag ? "ani" : "", common->ani.caldone ? "true" : "false");
+
ath9k_ps_restore(sc);
set_timer:
@@ -886,82 +890,6 @@ chip_reset:
#undef SCHED_INTR
}
-static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_channel *channel = hw->conf.channel;
- int r;
-
- ath9k_ps_wakeup(sc);
- spin_lock_bh(&sc->sc_pcu_lock);
- atomic_set(&ah->intr_ref_cnt, -1);
-
- ath9k_hw_configpcipowersave(ah, false);
-
- if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
-
- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
- if (r) {
- ath_err(common,
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- }
-
- ath_complete_reset(sc, true);
-
- /* Enable LED */
- ath9k_hw_cfg_output(ah, ah->led_pin,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(ah, ah->led_pin, 0);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
-
- ath9k_ps_restore(sc);
-}
-
-void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ieee80211_channel *channel = hw->conf.channel;
- int r;
-
- ath9k_ps_wakeup(sc);
-
- ath_cancel_work(sc);
-
- spin_lock_bh(&sc->sc_pcu_lock);
-
- /*
- * Keep the LED on when the radio is disabled
- * during idle unassociated state.
- */
- if (!sc->ps_idle) {
- ath9k_hw_set_gpio(ah, ah->led_pin, 1);
- ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
- }
-
- ath_prepare_reset(sc, false, true);
-
- if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
- if (r) {
- ath_err(ath9k_hw_common(sc->sc_ah),
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- }
-
- ath9k_hw_phy_disable(ah);
-
- ath9k_hw_configpcipowersave(ah, true);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
- ath9k_ps_restore(sc);
-}
-
static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
int r;
@@ -1097,6 +1025,9 @@ static int ath9k_start(struct ieee80211_
* and then setup of the interrupt mask.
*/
spin_lock_bh(&sc->sc_pcu_lock);
+
+ atomic_set(&ah->intr_ref_cnt, -1);
+
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
ath_err(common,
@@ -1138,6 +1069,18 @@ static int ath9k_start(struct ieee80211_
goto mutex_unlock;
}
+ if (ah->led_pin >= 0) {
+ ath9k_hw_cfg_output(ah, ah->led_pin,
+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+ ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+ }
+
+ /*
+ * Reset key cache to sane defaults (all entries cleared) instead of
+ * semi-random values after suspend/resume.
+ */
+ ath9k_cmn_init_crypto(sc->sc_ah);
+
spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
@@ -1183,6 +1126,13 @@ static void ath9k_tx(struct ieee80211_hw
}
}
+ /*
+ * Cannot tx while the hardware is in full sleep, it first needs a full
+ * chip reset to recover from that
+ */
+ if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP))
+ goto exit;
+
if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
/*
* We are using PS-Poll and mac80211 can request TX while in
@@ -1229,6 +1179,7 @@ static void ath9k_stop(struct ieee80211_
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
+ bool prev_idle;
mutex_lock(&sc->mutex);
@@ -1259,35 +1210,45 @@ static void ath9k_stop(struct ieee80211_
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
- if (!(sc->sc_flags & SC_OP_INVALID)) {
- ath_drain_all_txq(sc, false);
- ath_stoprecv(sc);
- ath9k_hw_phy_disable(ah);
- } else
- sc->rx.rxlink = NULL;
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ /* we can now sync irq and kill any running tasklets, since we already
+ * disabled interrupts and not holding a spin lock */
+ synchronize_irq(sc->irq);
+ tasklet_kill(&sc->intr_tq);
+ tasklet_kill(&sc->bcon_tasklet);
+
+ prev_idle = sc->ps_idle;
+ sc->ps_idle = true;
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ if (ah->led_pin >= 0) {
+ ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+ ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+ }
+
+ ath_prepare_reset(sc, false, true);
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
- /* disable HAL and put h/w to sleep */
- ath9k_hw_disable(ah);
+ if (!ah->curchan)
+ ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
- spin_unlock_bh(&sc->sc_pcu_lock);
+ ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+ ath9k_hw_phy_disable(ah);
- /* we can now sync irq and kill any running tasklets, since we already
- * disabled interrupts and not holding a spin lock */
- synchronize_irq(sc->irq);
- tasklet_kill(&sc->intr_tq);
- tasklet_kill(&sc->bcon_tasklet);
+ ath9k_hw_configpcipowersave(ah, true);
- ath9k_ps_restore(sc);
+ spin_unlock_bh(&sc->sc_pcu_lock);
- sc->ps_idle = true;
- ath_radio_disable(sc, hw);
+ ath9k_ps_restore(sc);
sc->sc_flags |= SC_OP_INVALID;
+ sc->ps_idle = prev_idle;
mutex_unlock(&sc->mutex);
@@ -1627,8 +1588,8 @@ static int ath9k_config(struct ieee80211
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
- bool disable_radio = false;
+ ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
/*
@@ -1639,13 +1600,8 @@ static int ath9k_config(struct ieee80211
*/
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
- if (!sc->ps_idle) {
- ath_radio_enable(sc, hw);
- ath_dbg(common, ATH_DBG_CONFIG,
- "not-idle: enabling radio\n");
- } else {
- disable_radio = true;
- }
+ if (sc->ps_idle)
+ ath_cancel_work(sc);
}
/*
@@ -1678,7 +1634,6 @@ static int ath9k_config(struct ieee80211
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.channel;
- struct ath9k_channel old_chan;
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
@@ -1704,11 +1659,8 @@ static int ath9k_config(struct ieee80211
* Preserve the current channel values, before updating
* the same channel
*/
- if (old_pos == pos) {
- memcpy(&old_chan, &sc->sc_ah->channels[pos],
- sizeof(struct ath9k_channel));
- ah->curchan = &old_chan;
- }
+ if (ah->curchan && (old_pos == pos))
+ ath9k_hw_getnf(ah, ah->curchan);
ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
curchan, conf->channel_type);
@@ -1752,18 +1704,12 @@ static int ath9k_config(struct ieee80211
ath_dbg(common, ATH_DBG_CONFIG,
"Set power: %d\n", conf->power_level);
sc->config.txpowlimit = 2 * conf->power_level;
- ath9k_ps_wakeup(sc);
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
- ath9k_ps_restore(sc);
- }
-
- if (disable_radio) {
- ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
- ath_radio_disable(sc, hw);
}
mutex_unlock(&sc->mutex);
+ ath9k_ps_restore(sc);
return 0;
}
@@ -2331,9 +2277,6 @@ static void ath9k_flush(struct ieee80211
return;
}
- if (drop)
- timeout = 1;
-
for (j = 0; j < timeout; j++) {
bool npend = false;
@@ -2351,21 +2294,22 @@ static void ath9k_flush(struct ieee80211
}
if (!npend)
- goto out;
+ break;
}
- ath9k_ps_wakeup(sc);
- spin_lock_bh(&sc->sc_pcu_lock);
- drain_txq = ath_drain_all_txq(sc, false);
- spin_unlock_bh(&sc->sc_pcu_lock);
+ if (drop) {
+ ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+ drain_txq = ath_drain_all_txq(sc, false);
+ spin_unlock_bh(&sc->sc_pcu_lock);
- if (!drain_txq)
- ath_reset(sc, false);
+ if (!drain_txq)
+ ath_reset(sc, false);
- ath9k_ps_restore(sc);
- ieee80211_wake_queues(hw);
+ ath9k_ps_restore(sc);
+ ieee80211_wake_queues(hw);
+ }
-out:
ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0);
mutex_unlock(&sc->mutex);
}
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -307,12 +307,11 @@ static int ath_pci_suspend(struct device
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
/* The device has to be moved to FULLSLEEP forcibly.
* Otherwise the chip never moved to full sleep,
* when no interface is up.
*/
+ ath9k_hw_disable(sc->sc_ah);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
return 0;
@@ -334,22 +333,6 @@ static int ath_pci_resume(struct device
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
- ath9k_ps_wakeup(sc);
- /* Enable LED */
- ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
-
- /*
- * Reset key cache to sane defaults (all entries cleared) instead of
- * semi-random values after suspend/resume.
- */
- ath9k_cmn_init_crypto(sc->sc_ah);
- ath9k_ps_restore(sc);
-
- sc->ps_idle = true;
- ath_radio_disable(sc, hw);
-
return 0;
}
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1954,7 +1954,7 @@ static void ath_tx_complete(struct ath_s
skb_pull(skb, padsize);
}
- if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
+ if ((sc->ps_flags & PS_WAIT_FOR_TX_ACK) && !txq->axq_depth) {
sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
ath_dbg(common, ATH_DBG_PS,
"Going back to sleep after having received TX status (0x%lx)\n",
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2785,9 +2785,11 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
* TX status to the socket error queue when requested with the
* socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
};
/**
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1149,6 +1149,7 @@ struct cfg80211_ibss_params {
u8 *ssid;
u8 *bssid;
struct ieee80211_channel *channel;
+ enum nl80211_channel_type channel_type;
u8 *ie;
u8 ssid_len, ie_len;
u16 beacon_interval;
@@ -3270,6 +3271,16 @@ void cfg80211_report_obss_beacon(struct
const u8 *frame, size_t len,
int freq, gfp_t gfp);
+/*
+ * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
+ * @wiphy: the wiphy
+ * @chan: main channel
+ * @channel_type: HT mode
+ */
+int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -185,6 +185,10 @@ static void ieee80211_send_addba_resp(st
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_WDS)
+ memcpy(mgmt->bssid, da, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -55,6 +55,8 @@
* @ampdu_action function will be called with the action
* %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
* and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
+ * Note that the sta can get destroyed before the BA tear down is
+ * complete.
*/
static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
@@ -79,10 +81,13 @@ static void ieee80211_send_addba_request
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+ sdata->vif.type == NL80211_IFTYPE_WDS)
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
@@ -319,6 +324,38 @@ ieee80211_wake_queue_agg(struct ieee8021
__release(agg_queue);
}
+/*
+ * splice packets from the STA's pending to the local pending,
+ * requires a call to ieee80211_agg_splice_finish later
+ */
+static void __acquires(agg_queue)
+ieee80211_agg_splice_packets(struct ieee80211_local *local,
+ struct tid_ampdu_tx *tid_tx, u16 tid)
+{
+ int queue = ieee80211_ac_from_tid(tid);
+ unsigned long flags;
+
+ ieee80211_stop_queue_agg(local, tid);
+
+ if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
+ " from the pending queue\n", tid))
+ return;
+
+ if (!skb_queue_empty(&tid_tx->pending)) {
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ /* copy over remaining packets */
+ skb_queue_splice_tail_init(&tid_tx->pending,
+ &local->pending[queue]);
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+ }
+}
+
+static void __releases(agg_queue)
+ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
+{
+ ieee80211_wake_queue_agg(local, tid);
+}
+
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
{
struct tid_ampdu_tx *tid_tx;
@@ -330,19 +367,17 @@ void ieee80211_tx_ba_session_handle_star
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
/*
- * While we're asking the driver about the aggregation,
- * stop the AC queue so that we don't have to worry
- * about frames that came in while we were doing that,
- * which would require us to put them to the AC pending
- * afterwards which just makes the code more complex.
+ * Start queuing up packets for this aggregation session.
+ * We're going to release them once the driver is OK with
+ * that.
*/
- ieee80211_stop_queue_agg(local, tid);
-
clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
/*
- * make sure no packets are being processed to get
- * valid starting sequence number
+ * Make sure no packets are being processed. This ensures that
+ * we have a valid starting sequence number and that in-flight
+ * packets have been flushed out and no packets for this TID
+ * will go into the driver during the ampdu_action call.
*/
synchronize_net();
@@ -356,10 +391,11 @@ void ieee80211_tx_ba_session_handle_star
" tid %d\n", tid);
#endif
spin_lock_bh(&sta->lock);
+ ieee80211_agg_splice_packets(local, tid_tx, tid);
ieee80211_assign_tid_tx(sta, tid, NULL);
+ ieee80211_agg_splice_finish(local, tid);
spin_unlock_bh(&sta->lock);
- ieee80211_wake_queue_agg(local, tid);
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,40))
kfree_rcu(tid_tx, rcu_head);
#else
@@ -368,9 +404,6 @@ void ieee80211_tx_ba_session_handle_star
return;
}
- /* we can take packets again now */
- ieee80211_wake_queue_agg(local, tid);
-
/* activate the timer for the recipient's addBA response */
mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
#ifdef CONFIG_MAC80211_HT_DEBUG
@@ -437,7 +470,9 @@ int ieee80211_start_tx_ba_session(struct
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_AP)
+ sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_WDS &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
return -EINVAL;
if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
@@ -448,6 +483,27 @@ int ieee80211_start_tx_ba_session(struct
return -EINVAL;
}
+ /*
+ * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
+ * member of an IBSS, and has no other existing Block Ack agreement
+ * with the recipient STA, then the initiating STA shall transmit a
+ * Probe Request frame to the recipient STA and shall not transmit an
+ * ADDBA Request frame unless it receives a Probe Response frame
+ * from the recipient within dot11ADDBAFailureTimeout.
+ *
+ * The probe request mechanism for ADDBA is currently not implemented,
+ * but we only build up Block Ack session with HT STAs. This information
+ * is set when we receive a bss info from a probe response or a beacon.
+ */
+ if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+ !sta->sta.ht_cap.ht_supported) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "BA request denied - IBSS STA %pM"
+ "does not advertise HT support\n", pubsta->addr);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ return -EINVAL;
+ }
+
spin_lock_bh(&sta->lock);
/* we have tried too many times, receiver does not want A-MPDU */
@@ -508,38 +564,6 @@ int ieee80211_start_tx_ba_session(struct
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
-/*
- * splice packets from the STA's pending to the local pending,
- * requires a call to ieee80211_agg_splice_finish later
- */
-static void __acquires(agg_queue)
-ieee80211_agg_splice_packets(struct ieee80211_local *local,
- struct tid_ampdu_tx *tid_tx, u16 tid)
-{
- int queue = ieee80211_ac_from_tid(tid);
- unsigned long flags;
-
- ieee80211_stop_queue_agg(local, tid);
-
- if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
- " from the pending queue\n", tid))
- return;
-
- if (!skb_queue_empty(&tid_tx->pending)) {
- spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
- /* copy over remaining packets */
- skb_queue_splice_tail_init(&tid_tx->pending,
- &local->pending[queue]);
- spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- }
-}
-
-static void __releases(agg_queue)
-ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
-{
- ieee80211_wake_queue_agg(local, tid);
-}
-
static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
struct sta_info *sta, u16 tid)
{
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -63,11 +63,11 @@ static ssize_t sta_flags_read(struct fil
test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
int res = scnprintf(buf, sizeof(buf),
- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
TEST(PS_DRIVER), TEST(AUTHORIZED),
TEST(SHORT_PREAMBLE),
- TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
+ TEST(WME), TEST(CLEAR_PS_FILT),
TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
TEST(TDLS_PEER_AUTH));
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -47,7 +47,9 @@ void ieee80211_apply_htcap_overrides(str
int i;
if (sdata->vif.type != NL80211_IFTYPE_STATION) {
- WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION);
+ /* AP interfaces call this code when adding new stations,
+ * so just silently ignore non station interfaces.
+ */
return;
}
@@ -282,6 +284,8 @@ void ieee80211_send_delba(struct ieee802
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -77,6 +77,7 @@ static void __ieee80211_sta_join_ibss(st
struct cfg80211_bss *bss;
u32 bss_change;
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
+ enum nl80211_channel_type channel_type;
lockdep_assert_held(&ifibss->mtx);
@@ -105,8 +106,16 @@ static void __ieee80211_sta_join_ibss(st
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- local->oper_channel = chan;
- WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
+ channel_type = ifibss->channel_type;
+ if (channel_type > NL80211_CHAN_HT20 &&
+ !cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
+ channel_type = NL80211_CHAN_HT20;
+ if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
+ /* can only fail due to HT40+/- mismatch */
+ channel_type = NL80211_CHAN_HT20;
+ WARN_ON(!ieee80211_set_channel_type(local, sdata,
+ NL80211_CHAN_HT20));
+ }
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
sband = local->hw.wiphy->bands[chan->band];
@@ -172,6 +181,19 @@ static void __ieee80211_sta_join_ibss(st
memcpy(skb_put(skb, ifibss->ie_len),
ifibss->ie, ifibss->ie_len);
+ /* add HT capability and information IEs */
+ if (channel_type && sband->ht_cap.ht_supported) {
+ pos = skb_put(skb, 4 +
+ sizeof(struct ieee80211_ht_cap) +
+ sizeof(struct ieee80211_ht_info));
+ pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap,
+ sband->ht_cap.cap);
+ pos = ieee80211_ie_build_ht_info(pos,
+ &sband->ht_cap,
+ chan,
+ channel_type);
+ }
+
if (local->hw.queues >= 4) {
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
@@ -195,6 +217,7 @@ static void __ieee80211_sta_join_ibss(st
bss_change |= BSS_CHANGED_BEACON;
bss_change |= BSS_CHANGED_BEACON_ENABLED;
bss_change |= BSS_CHANGED_BASIC_RATES;
+ bss_change |= BSS_CHANGED_HT;
bss_change |= BSS_CHANGED_IBSS;
sdata->vif.bss_conf.ibss_joined = true;
ieee80211_bss_info_change_notify(sdata, bss_change);
@@ -268,6 +291,8 @@ static void ieee80211_rx_bss_info(struct
u64 beacon_timestamp, rx_timestamp;
u32 supp_rates = 0;
enum ieee80211_band band = rx_status->band;
+ struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+ bool rates_updated = false;
if (elems->ds_params && elems->ds_params_len == 1)
freq = ieee80211_channel_to_frequency(elems->ds_params[0],
@@ -307,7 +332,7 @@ static void ieee80211_rx_bss_info(struct
prev_rates,
sta->sta.supp_rates[band]);
#endif
- rate_control_rate_init(sta);
+ rates_updated = true;
}
} else
sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
@@ -318,6 +343,39 @@ static void ieee80211_rx_bss_info(struct
if (sta && elems->wmm_info)
set_sta_flag(sta, WLAN_STA_WME);
+ if (sta && elems->ht_info_elem && elems->ht_cap_elem &&
+ sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) {
+ /* we both use HT */
+ struct ieee80211_sta_ht_cap sta_ht_cap_new;
+ enum nl80211_channel_type channel_type =
+ ieee80211_ht_info_to_channel_type(
+ elems->ht_info_elem);
+
+ ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+ elems->ht_cap_elem,
+ &sta_ht_cap_new);
+
+ /*
+ * fall back to HT20 if we don't use or use
+ * the other extension channel
+ */
+ if ((channel_type == NL80211_CHAN_HT40MINUS ||
+ channel_type == NL80211_CHAN_HT40PLUS) &&
+ channel_type != sdata->u.ibss.channel_type)
+ sta_ht_cap_new.cap &=
+ ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+ if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new,
+ sizeof(sta_ht_cap_new))) {
+ memcpy(&sta->sta.ht_cap, &sta_ht_cap_new,
+ sizeof(sta_ht_cap_new));
+ rates_updated = true;
+ }
+ }
+
+ if (sta && rates_updated)
+ rate_control_rate_init(sta);
+
rcu_read_unlock();
}
@@ -896,12 +954,18 @@ int ieee80211_ibss_join(struct ieee80211
struct cfg80211_ibss_params *params)
{
struct sk_buff *skb;
+ u32 changed = 0;
skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
- 36 /* bitrates */ +
- 34 /* SSID */ +
- 3 /* DS params */ +
- 4 /* IBSS params */ +
+ sizeof(struct ieee80211_hdr_3addr) +
+ 12 /* struct ieee80211_mgmt.u.beacon */ +
+ 2 + IEEE80211_MAX_SSID_LEN /* max SSID */ +
+ 2 + 8 /* max Supported Rates */ +
+ 3 /* max DS params */ +
+ 4 /* IBSS params */ +
+ 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
+ 2 + sizeof(struct ieee80211_ht_cap) +
+ 2 + sizeof(struct ieee80211_ht_info) +
params->ie_len);
if (!skb)
return -ENOMEM;
@@ -922,13 +986,15 @@ int ieee80211_ibss_join(struct ieee80211
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
sdata->u.ibss.channel = params->channel;
+ sdata->u.ibss.channel_type = params->channel_type;
sdata->u.ibss.fixed_channel = params->channel_fixed;
/* fix ourselves to that channel now already */
if (params->channel_fixed) {
sdata->local->oper_channel = params->channel;
- WARN_ON(!ieee80211_set_channel_type(sdata->local, sdata,
- NL80211_CHAN_NO_HT));
+ if (!ieee80211_set_channel_type(sdata->local, sdata,
+ params->channel_type))
+ return -EINVAL;
}
if (params->ie) {
@@ -951,6 +1017,23 @@ int ieee80211_ibss_join(struct ieee80211
ieee80211_recalc_idle(sdata->local);
mutex_unlock(&sdata->local->mtx);
+ /*
+ * 802.11n-2009 9.13.3.1: In an IBSS, the HT Protection field is
+ * reserved, but an HT STA shall protect HT transmissions as though
+ * the HT Protection field were set to non-HT mixed mode.
+ *
+ * In an IBSS, the RIFS Mode field of the HT Operation element is
+ * also reserved, but an HT STA shall operate as though this field
+ * were set to 1.
+ */
+
+ sdata->vif.bss_conf.ht_operation_mode |=
+ IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED
+ | IEEE80211_HT_PARAM_RIFS_MODE;
+
+ changed |= BSS_CHANGED_HT;
+ ieee80211_bss_info_change_notify(sdata, changed);
+
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
return 0;
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -474,6 +474,7 @@ struct ieee80211_if_ibss {
u8 ssid_len, ie_len;
u8 *ie;
struct ieee80211_channel *channel;
+ enum nl80211_channel_type channel_type;
unsigned long ibss_join_req;
/* probe response/beacon for IBSS */
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -178,7 +178,6 @@ static int ieee80211_do_open(struct net_
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
u32 changed = 0;
int res;
u32 hw_reconf_flags = 0;
@@ -309,27 +308,6 @@ static int ieee80211_do_open(struct net_
set_bit(SDATA_STATE_RUNNING, &sdata->state);
- if (sdata->vif.type == NL80211_IFTYPE_WDS) {
- /* Create STA entry for the WDS peer */
- sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
- GFP_KERNEL);
- if (!sta) {
- res = -ENOMEM;
- goto err_del_interface;
- }
-
- /* no atomic bitop required since STA is not live yet */
- set_sta_flag(sta, WLAN_STA_AUTHORIZED);
-
- res = sta_info_insert(sta);
- if (res) {
- /* STA has been freed */
- goto err_del_interface;
- }
-
- rate_control_rate_init(sta);
- }
-
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
@@ -356,8 +334,7 @@ static int ieee80211_do_open(struct net_
netif_tx_start_all_queues(dev);
return 0;
- err_del_interface:
- drv_remove_interface(local, sdata);
+
err_stop:
if (!local->open_count)
drv_stop(local);
@@ -719,6 +696,70 @@ static void ieee80211_if_setup(struct ne
dev->destructor = free_netdev;
}
+static void ieee80211_wds_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_rx_status *rx_status;
+ struct ieee802_11_elems elems;
+ struct ieee80211_mgmt *mgmt;
+ struct sta_info *sta;
+ size_t baselen;
+ u32 rates = 0;
+ u16 stype;
+ bool new = false;
+ enum ieee80211_band band = local->hw.conf.channel->band;
+ struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+
+ rx_status = IEEE80211_SKB_RXCB(skb);
+ mgmt = (struct ieee80211_mgmt *) skb->data;
+ stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
+
+ if (stype != IEEE80211_STYPE_BEACON)
+ return;
+
+ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
+ if (baselen > skb->len)
+ return;
+
+ ieee802_11_parse_elems(mgmt->u.probe_resp.variable,
+ skb->len - baselen, &elems);
+
+ rates = ieee80211_sta_get_rates(local, &elems, band);
+
+ rcu_read_lock();
+
+ sta = sta_info_get(sdata, sdata->u.wds.remote_addr);
+
+ if (!sta) {
+ rcu_read_unlock();
+ sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+ GFP_KERNEL);
+ if (!sta)
+ return;
+
+ new = true;
+ }
+
+ sta->last_rx = jiffies;
+ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+
+ if (elems.ht_cap_elem)
+ ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+ elems.ht_cap_elem, &sta->sta.ht_cap);
+
+ if (elems.wmm_param)
+ set_sta_flag(sta, WLAN_STA_WME);
+
+ if (new) {
+ set_sta_flag(sta, WLAN_STA_AUTHORIZED);
+ rate_control_rate_init(sta);
+ sta_info_insert_rcu(sta);
+ }
+
+ rcu_read_unlock();
+}
+
static void ieee80211_iface_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
@@ -823,6 +864,9 @@ static void ieee80211_iface_work(struct
break;
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
break;
+ case NL80211_IFTYPE_WDS:
+ ieee80211_wds_rx_queued_mgmt(sdata, skb);
+ break;
default:
WARN(1, "frame for unexpected interface type");
break;
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -574,7 +574,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(
WIPHY_FLAG_OFFCHAN_TX |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
- wiphy->features = NL80211_FEATURE_SK_TX_STATUS;
+ wiphy->features = NL80211_FEATURE_SK_TX_STATUS |
+ NL80211_FEATURE_HT_IBSS;
if (!ops->set_key)
wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2237,7 +2237,9 @@ ieee80211_rx_h_action(struct ieee80211_r
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_AP)
+ sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_WDS &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
break;
/* verify action_code is present */
@@ -2452,13 +2454,14 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
if (!ieee80211_vif_is_mesh(&sdata->vif) &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
- sdata->vif.type != NL80211_IFTYPE_STATION)
+ sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_WDS)
return RX_DROP_MONITOR;
switch (stype) {
case cpu_to_le16(IEEE80211_STYPE_BEACON):
case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
- /* process for all: mesh, mlme, ibss */
+ /* process for all: mesh, mlme, ibss, wds */
break;
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
@@ -2796,19 +2799,32 @@ static int prepare_for_handlers(struct i
return 0;
} else if (!ieee80211_bssid_match(bssid,
sdata->vif.addr)) {
+ /*
+ * Accept public action frames even when the
+ * BSSID doesn't match, this is used for P2P
+ * and location updates. Note that mac80211
+ * itself never looks at these frames.
+ */
if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
- !ieee80211_is_beacon(hdr->frame_control) &&
- !(ieee80211_is_action(hdr->frame_control) &&
- sdata->vif.p2p))
+ ieee80211_is_public_action(hdr, skb->len))
+ return 1;
+ if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
+ !ieee80211_is_beacon(hdr->frame_control))
return 0;
status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
}
break;
case NL80211_IFTYPE_WDS:
- if (bssid || !ieee80211_is_data(hdr->frame_control))
- return 0;
if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
return 0;
+
+ if (ieee80211_is_data(hdr->frame_control) ||
+ ieee80211_is_action(hdr->frame_control)) {
+ if (compare_ether_addr(sdata->vif.addr, hdr->addr1))
+ return 0;
+ } else if (!ieee80211_is_beacon(hdr->frame_control))
+ return 0;
+
break;
default:
/* should never get here */
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -31,7 +31,6 @@
* @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
* frames.
* @WLAN_STA_WME: Station is a QoS-STA.
- * @WLAN_STA_WDS: Station is one of our WDS peers.
* @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
* IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
* frame to this station is transmitted.
@@ -60,7 +59,6 @@ enum ieee80211_sta_info_flags {
WLAN_STA_AUTHORIZED,
WLAN_STA_SHORT_PREAMBLE,
WLAN_STA_WME,
- WLAN_STA_WDS,
WLAN_STA_CLEAR_PS_FILT,
WLAN_STA_MFP,
WLAN_STA_BLOCK_BA,
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1612,6 +1612,11 @@ u8 *ieee80211_ie_build_ht_info(u8 *pos,
}
if (ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
ht_info->ht_param |= IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
+
+ /*
+ * Note: According to 802.11n-2009 9.13.3.1, HT Protection field and
+ * RIFS Mode are reserved in IBSS mode, therefore keep them at 0
+ */
ht_info->operation_mode = 0x0000;
ht_info->stbc_param = 0x0000;
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -6,6 +6,7 @@
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
*/
+#include <linux/export.h>
#include <net/cfg80211.h>
#include "core.h"
@@ -44,9 +45,9 @@ rdev_freq_to_chan(struct cfg80211_regist
return chan;
}
-static bool can_beacon_sec_chan(struct wiphy *wiphy,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
+int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type)
{
struct ieee80211_channel *sec_chan;
int diff;
@@ -75,6 +76,7 @@ static bool can_beacon_sec_chan(struct w
return true;
}
+EXPORT_SYMBOL(cfg80211_can_beacon_sec_chan);
int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, int freq,
@@ -109,8 +111,8 @@ int cfg80211_set_freq(struct cfg80211_re
switch (channel_type) {
case NL80211_CHAN_HT40PLUS:
case NL80211_CHAN_HT40MINUS:
- if (!can_beacon_sec_chan(&rdev->wiphy, chan,
- channel_type)) {
+ if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, chan,
+ channel_type)) {
printk(KERN_DEBUG
"cfg80211: Secondary channel not "
"allowed to initiate communication\n");
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4684,13 +4684,41 @@ static int nl80211_join_ibss(struct sk_b
ibss.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
- ibss.channel = ieee80211_get_channel(wiphy,
- nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
+ enum nl80211_channel_type channel_type;
+
+ channel_type = nla_get_u32(
+ info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
+ if (channel_type != NL80211_CHAN_NO_HT &&
+ channel_type != NL80211_CHAN_HT20 &&
+ channel_type != NL80211_CHAN_HT40MINUS &&
+ channel_type != NL80211_CHAN_HT40PLUS)
+ return -EINVAL;
+
+ if (channel_type != NL80211_CHAN_NO_HT &&
+ !(wiphy->features & NL80211_FEATURE_HT_IBSS))
+ return -EINVAL;
+
+ ibss.channel_type = channel_type;
+ } else {
+ ibss.channel_type = NL80211_CHAN_NO_HT;
+ }
+
+ ibss.channel = rdev_freq_to_chan(rdev,
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]),
+ ibss.channel_type);
if (!ibss.channel ||
ibss.channel->flags & IEEE80211_CHAN_NO_IBSS ||
ibss.channel->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
+ /* Both channels should be able to initiate communication */
+ if ((ibss.channel_type == NL80211_CHAN_HT40PLUS ||
+ ibss.channel_type == NL80211_CHAN_HT40MINUS) &&
+ !cfg80211_can_beacon_sec_chan(&rdev->wiphy, ibss.channel,
+ ibss.channel_type))
+ return -EINVAL;
+
ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
ibss.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1695,6 +1695,23 @@ static inline bool ieee80211_is_robust_m
}
/**
+ * ieee80211_is_public_action - check if frame is a public action frame
+ * @hdr: the frame
+ * @len: length of the frame
+ */
+static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
+ size_t len)
+{
+ struct ieee80211_mgmt *mgmt = (void *)hdr;
+
+ if (len < 25)
+ return false;
+ if (!ieee80211_is_action(hdr->frame_control))
+ return false;
+ return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC;
+}
+
+/**
* ieee80211_fhss_chan_to_freq - get channel frequency
* @channel: the FHSS channel
*
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1332,8 +1332,11 @@ static int invoke_tx_handlers(struct iee
if (!(tx->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL))
CALL_TXH(ieee80211_tx_h_rate_ctrl);
- if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION))
+ if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION)) {
+ __skb_queue_tail(&tx->skbs, tx->skb);
+ tx->skb = NULL;
goto txh_done;
+ }
CALL_TXH(ieee80211_tx_h_michael_mic_add);
CALL_TXH(ieee80211_tx_h_sequence);
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -851,6 +851,7 @@ static int __must_check __sta_info_destr
struct ieee80211_sub_if_data *sdata;
unsigned long flags;
int ret, i, ac;
+ struct tid_ampdu_tx *tid_tx;
might_sleep();
@@ -949,6 +950,30 @@ static int __must_check __sta_info_destr
}
#endif
+ /* There could be some memory leaks because of ampdu tx pending queue
+ * not being freed before destroying the station info.
+ *
+ * Make sure that such queues are purged before freeing the station
+ * info.
+ * TODO: We have to somehow postpone the full destruction
+ * until the aggregation stop completes. Refer
+ * http://thread.gmane.org/gmane.linux.kernel.wireless.general/81936
+ */
+ for (i = 0; i < STA_TID_NUM; i++) {
+ if (!sta->ampdu_mlme.tid_tx[i])
+ continue;
+ tid_tx = sta->ampdu_mlme.tid_tx[i];
+ if (skb_queue_len(&tid_tx->pending)) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ wiphy_debug(local->hw.wiphy, "TX A-MPDU purging %d "
+ "packets for tid=%d\n",
+ skb_queue_len(&tid_tx->pending), i);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ __skb_queue_purge(&tid_tx->pending);
+ }
+ kfree_rcu(tid_tx, rcu_head);
+ }
+
__sta_info_free(local, sta);
return 0;
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -402,6 +402,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, s
ah->noise = ath9k_hw_getchan_noise(ah, chan);
return true;
}
+EXPORT_SYMBOL(ath9k_hw_getnf);
void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
struct ath9k_channel *chan)