openwrtv3/target/linux/brcm2708/patches-4.1/0090-i2c-bcm2708-BCM270X_DT-Add-support-for-I2C2.patch
John Crispin bf28fb50bf brcm2708: update 4.1 patches
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47258
2015-10-26 09:01:05 +00:00

163 lines
4.5 KiB
Diff

From 5130d7fdc237418537e377b951dd388723de1502 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 22 Jun 2015 14:23:03 +0100
Subject: [PATCH 090/203] i2c-bcm2708/BCM270X_DT: Add support for I2C2
The third I2C bus (I2C2) is normally reserved for HDMI use. Careless
use of this bus can break an attached display - use with caution.
It is recommended to disable accesses by VideoCore by setting
hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt.
The interface is disabled by default - enable using the
i2c2_iknowwhatimdoing DT parameter.
---
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 6 ++++++
arch/arm/boot/dts/bcm2708-rpi-b.dts | 6 ++++++
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 6 ++++++
arch/arm/boot/dts/bcm2708_common.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 6 ++++++
drivers/i2c/busses/i2c-bcm2708.c | 5 ++++-
6 files changed, 42 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -75,6 +75,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -103,8 +107,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
act_led_gpio = <&act_led>,"gpios:4";
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -75,6 +75,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -97,8 +101,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
act_led_gpio = <&act_led>,"gpios:4";
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -65,6 +65,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -79,8 +83,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
};
};
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -20,6 +20,7 @@
uart1 = &uart1;
mmc = &mmc;
i2c1 = &i2c1;
+ i2c2 = &i2c2;
usb = &usb;
leds = &leds;
fb = &fb;
@@ -179,6 +180,19 @@
interrupts = <2 21>;
clocks = <&clk_i2c>;
#address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7e805000 {
+ // Beware - this is shared with the HDMI module.
+ // Careless use may break (really) your display.
+ // Caveat emptor.
+ compatible = "brcm,bcm2708-i2c";
+ reg = <0x7e805000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ #address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -75,6 +75,10 @@
clock-frequency = <100000>;
};
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
&i2s {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -103,8 +107,10 @@
spi = <&spi0>,"status";
i2c0 = <&i2c0>,"status";
i2c1 = <&i2c1>,"status";
+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
i2c0_baudrate = <&i2c0>,"clock-frequency:0";
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
core_freq = <&clk_core>,"clock-frequency:0";
act_led_gpio = <&act_led>,"gpios:4";
--- a/drivers/i2c/busses/i2c-bcm2708.c
+++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -407,8 +407,11 @@ static int bcm2708_i2c_probe(struct plat
case 1:
adap->class = I2C_CLASS_DDC;
break;
+ case 2:
+ adap->class = I2C_CLASS_DDC;
+ break;
default:
- dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
+ dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n");
err = -ENXIO;
goto out_free_bi;
}