openwrtv3/target/linux/brcm2708/patches-4.9/0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch
Álvaro Fernández Rojas baad22eed3 brcm2708: update linux 4.9 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.9.y

- Remove led1 from diag.sh for RPi3 since it causes boot issues.
- Fix modules.mk typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-03-04 19:37:50 +01:00

78 lines
2.7 KiB
Diff

From 936dc8b00ccd5072c5d610b97199402275bfdf26 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 4 Nov 2016 15:58:38 -0700
Subject: [PATCH] drm/vc4: Use runtime autosuspend to avoid thrashing V3D power
state.
The pm_runtime_put() we were using immediately released power on the
device, which meant that we were generally turning the device off and
on once per frame. In many profiles I've looked at, that added up to
about 1% of CPU time, but this could get worse in the case of frequent
rendering and readback (as may happen in X rendering). By keeping the
device on until we've been idle for a couple of frames, we drop the
overhead of runtime PM down to sub-.1%.
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3a62234680d86efa0239665ed8a0e908f1aef147)
---
drivers/gpu/drm/vc4/vc4_drv.c | 9 ++++++---
drivers/gpu/drm/vc4/vc4_gem.c | 6 ++++--
drivers/gpu/drm/vc4/vc4_v3d.c | 2 ++
3 files changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -61,21 +61,24 @@ static int vc4_get_param_ioctl(struct dr
if (ret < 0)
return ret;
args->value = V3D_READ(V3D_IDENT0);
- pm_runtime_put(&vc4->v3d->pdev->dev);
+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
break;
case DRM_VC4_PARAM_V3D_IDENT1:
ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev);
if (ret < 0)
return ret;
args->value = V3D_READ(V3D_IDENT1);
- pm_runtime_put(&vc4->v3d->pdev->dev);
+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
break;
case DRM_VC4_PARAM_V3D_IDENT2:
ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev);
if (ret < 0)
return ret;
args->value = V3D_READ(V3D_IDENT2);
- pm_runtime_put(&vc4->v3d->pdev->dev);
+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
break;
case DRM_VC4_PARAM_SUPPORTS_BRANCHES:
case DRM_VC4_PARAM_SUPPORTS_ETC1:
--- a/drivers/gpu/drm/vc4/vc4_gem.c
+++ b/drivers/gpu/drm/vc4/vc4_gem.c
@@ -711,8 +711,10 @@ vc4_complete_exec(struct drm_device *dev
}
mutex_lock(&vc4->power_lock);
- if (--vc4->power_refcount == 0)
- pm_runtime_put(&vc4->v3d->pdev->dev);
+ if (--vc4->power_refcount == 0) {
+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
+ }
mutex_unlock(&vc4->power_lock);
kfree(exec);
--- a/drivers/gpu/drm/vc4/vc4_v3d.c
+++ b/drivers/gpu/drm/vc4/vc4_v3d.c
@@ -222,6 +222,8 @@ static int vc4_v3d_bind(struct device *d
return ret;
}
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */
pm_runtime_enable(dev);
return 0;