2534141322
Add initial support for Marvell MACCHIATObin, cortex-a72 based Marvell ARMADA 8040 Community board. Comes in two forms: Single Shot and Double Shot. Specifications: - Quad core Cortex-A72 (up to 2GHz) - DDR4 DIMM slot with optional ECC and single/dual chip select support - Dual 10GbE (1/2.5/10GbE) via copper or SFP 2.5GbE (1/2.5GbE) via SFP 1GbE via copper - SPI Flash - 3 X SATA 3.0 connectors - MicroSD connector - eMMC - PCI x4 3.0 slot - USB 2.0 Headers (Internal) - USB 3.0 connector - Console port (UART) over microUSB connector - 20-pin Connector for CPU JTAG debugger - 2 X UART Headers - 12V input via DC Jack - ATX type power connector - Form Factor: Mini-ITX (170 mm x 170 mm) More details at http://macchiatobin.net Booting from micro SD card: 1. reset U-Boot environment: env default -a saveenv 2. prepare U-Boot with boot script: setenv bootcmd "load mmc 1:1 0x4d00000 boot.scr; source 0x4d00000" saveenv or manually: setenv fdt_name armada-8040-mcbin.dtb setenv image_name Image setenv bootcmd 'mmc dev 1; ext4load mmc 1:1 $kernel_addr $image_name;ext4load mmc 1:1 $fdt_addr $fdt_name;setenv bootargs $console root=/dev/mmcblk1p2 rw rootwait; booti $kernel_addr - $fdt_addr' saveenv Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
58 lines
1.3 KiB
Bash
Executable file
58 lines
1.3 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2014-2016 OpenWrt.org
|
|
# Copyright (C) 2016 LEDE-Project.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
armada-385-db-ap)
|
|
ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
|
|
;;
|
|
armada-385-linksys-caiman|\
|
|
armada-385-linksys-cobra|\
|
|
armada-385-linksys-rango|\
|
|
armada-385-linksys-shelby|\
|
|
armada-xp-linksys-mamba)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1"
|
|
;;
|
|
armada-385-turris-omnia)
|
|
ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
|
|
ucidef_set_interface_wan "eth2"
|
|
;;
|
|
armada-388-clearfog-*)
|
|
# eth0 is standalone ethernet
|
|
# eth1 is switch (-pro) or standalone ethernet (-base)
|
|
# eth2 is SFP
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"
|
|
|
|
# if switch exists (clearfog-pro)
|
|
# switch port 5 is connected to eth1
|
|
swconfig list 2>&1 | grep -q switch0 && \
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6"
|
|
;;
|
|
armada-xp-gp)
|
|
ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
|
|
;;
|
|
globalscale,espressobin)
|
|
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
|
|
;;
|
|
marvell,armada8040-mcbin)
|
|
ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
|
|
;;
|
|
*)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|