openwrtv3/target/linux/brcm63xx/patches-3.13/505-board_spw500v.patch
Jonas Gorski 0d120f42da brcm63xx: add preliminary support for 3.13
Add support for 3.13 as a development kernel. Mostly untested, only net
booted. If flashed may brick your router or kill your cat.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39746
2014-02-24 15:54:12 +00:00

78 lines
1.4 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -647,6 +647,67 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_spw500v = {
+ .name = "SPW500V",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ .leds = {
+ {
+ .name = "SPW500V:red:power",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "SPW500V:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "SPW500V:green:ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ { .name = "SPW500V:green:pstn",
+ .gpio = 28,
+ .active_low = 1,
+ },
+ {
+ .name = "SPW500V:green:voip",
+ .gpio = 32,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -1569,6 +1630,7 @@ static const struct board_info __initcon
&board_96348gw_a,
&board_rta1025w_16,
&board_96348_D4PW,
+ &board_spw500v,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358