openwrtv3/target/linux/ar71xx
Ding Tengfei e07014e70b ar71xx: add support for COMFAST CF-E355AC v2
COMFAST CF-E355AC v2 is a ceiling mount AP with PoE support, based on
Qualcomm/Atheros QCA9531 + QCA9886.

Short specification:

- 2x 10/100 Mbps Ethernet, with PoE support
- 128MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, 802.11b/g/n
- 2T2R 5 GHz, 802.11ac/n/a, WAVE 2
- built-in 4x 3 dBi antennas
- output power (max): 500 mW (27 dBm)
- 1x RGB LED, 1x button
- built-in watchdog chipset

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Ding Tengfei <dtf@comfast.cn>
[updated kernel config for both boards]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-22 18:53:22 +01:00
..
base-files ar71xx: add support for COMFAST CF-E355AC v2 2018-02-22 18:53:22 +01:00
files ar71xx: add support for COMFAST CF-E355AC v2 2018-02-22 18:53:22 +01:00
generic ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 2018-02-22 18:53:22 +01:00
image ar71xx: add support for COMFAST CF-E355AC v2 2018-02-22 18:53:22 +01:00
mikrotik ar71xx: reorganize kernel configuration 2018-01-13 19:54:45 +01:00
nand ar71xx: reorganize kernel configuration 2018-01-13 19:54:45 +01:00
patches-4.4 ar71xx: disable 40Mhz refclk for QCA953x 2018-02-22 18:53:22 +01:00
patches-4.9 ar71xx: disable 40Mhz refclk for QCA953x 2018-02-22 18:53:22 +01:00
tiny ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
config-4.4 ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 2018-02-22 18:53:22 +01:00
config-4.9 ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 2018-02-22 18:53:22 +01:00
Makefile ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
modules.mk ar71xx: add LED driver NU801 2015-12-11 15:04:57 +00:00