openwrtv3/target/linux/generic/files/drivers/net/phy/rtl8306.c
John Crispin deba38f2a7 kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx
If the CPU port is not forced up, the link, at least on this board, is lost after
changes are applied. This makes sure that the link is restored. Regression tests
should confirm it doesn't break other boards.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40305
2014-03-30 09:15:16 +00:00

1099 lines
25 KiB
C

/*
* rtl8306.c: RTL8306S switch driver
*
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <net/genetlink.h>
#include <linux/switch.h>
#include <linux/delay.h>
#include <linux/phy.h>
//#define DEBUG 1
/* Global (PHY0) */
#define RTL8306_REG_PAGE 16
#define RTL8306_REG_PAGE_LO (1 << 15)
#define RTL8306_REG_PAGE_HI (1 << 1) /* inverted */
#define RTL8306_NUM_VLANS 16
#define RTL8306_NUM_PORTS 6
#define RTL8306_PORT_CPU 5
#define RTL8306_NUM_PAGES 4
#define RTL8306_NUM_REGS 32
#define RTL_NAME_S "RTL8306S"
#define RTL_NAME_SD "RTL8306SD"
#define RTL_NAME_SDM "RTL8306SDM"
#define RTL_NAME_UNKNOWN "RTL8306(unknown)"
#define RTL8306_MAGIC 0x8306
static LIST_HEAD(phydevs);
struct rtl_priv {
struct list_head list;
struct switch_dev dev;
int page;
int type;
int do_cpu;
struct mii_bus *bus;
char hwname[sizeof(RTL_NAME_UNKNOWN)];
bool fixup;
};
struct rtl_phyregs {
int nway;
int speed;
int duplex;
};
#define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev)
enum {
RTL_TYPE_S,
RTL_TYPE_SD,
RTL_TYPE_SDM,
};
struct rtl_reg {
int page;
int phy;
int reg;
int bits;
int shift;
int inverted;
};
#define RTL_VLAN_REGOFS(name) \
(RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name)
#define RTL_PORT_REGOFS(name) \
(RTL_REG_PORT1_##name - RTL_REG_PORT0_##name)
#define RTL_PORT_REG(id, reg) \
(RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg)))
#define RTL_VLAN_REG(id, reg) \
(RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg)))
#define RTL_GLOBAL_REGATTR(reg) \
.id = RTL_REG_##reg, \
.type = SWITCH_TYPE_INT, \
.ofs = 0, \
.set = rtl_attr_set_int, \
.get = rtl_attr_get_int
#define RTL_PORT_REGATTR(reg) \
.id = RTL_REG_PORT0_##reg, \
.type = SWITCH_TYPE_INT, \
.ofs = RTL_PORT_REGOFS(reg), \
.set = rtl_attr_set_port_int, \
.get = rtl_attr_get_port_int
#define RTL_VLAN_REGATTR(reg) \
.id = RTL_REG_VLAN0_##reg, \
.type = SWITCH_TYPE_INT, \
.ofs = RTL_VLAN_REGOFS(reg), \
.set = rtl_attr_set_vlan_int, \
.get = rtl_attr_get_vlan_int
enum rtl_regidx {
RTL_REG_CHIPID,
RTL_REG_CHIPVER,
RTL_REG_CHIPTYPE,
RTL_REG_CPUPORT,
RTL_REG_EN_CPUPORT,
RTL_REG_EN_TAG_OUT,
RTL_REG_EN_TAG_CLR,
RTL_REG_EN_TAG_IN,
RTL_REG_TRAP_CPU,
RTL_REG_CPU_LINKUP,
RTL_REG_TRUNK_PORTSEL,
RTL_REG_EN_TRUNK,
RTL_REG_RESET,
RTL_REG_VLAN_ENABLE,
RTL_REG_VLAN_FILTER,
RTL_REG_VLAN_TAG_ONLY,
RTL_REG_VLAN_TAG_AWARE,
#define RTL_VLAN_ENUM(id) \
RTL_REG_VLAN##id##_VID, \
RTL_REG_VLAN##id##_PORTMASK
RTL_VLAN_ENUM(0),
RTL_VLAN_ENUM(1),
RTL_VLAN_ENUM(2),
RTL_VLAN_ENUM(3),
RTL_VLAN_ENUM(4),
RTL_VLAN_ENUM(5),
RTL_VLAN_ENUM(6),
RTL_VLAN_ENUM(7),
RTL_VLAN_ENUM(8),
RTL_VLAN_ENUM(9),
RTL_VLAN_ENUM(10),
RTL_VLAN_ENUM(11),
RTL_VLAN_ENUM(12),
RTL_VLAN_ENUM(13),
RTL_VLAN_ENUM(14),
RTL_VLAN_ENUM(15),
#define RTL_PORT_ENUM(id) \
RTL_REG_PORT##id##_PVID, \
RTL_REG_PORT##id##_NULL_VID_REPLACE, \
RTL_REG_PORT##id##_NON_PVID_DISCARD, \
RTL_REG_PORT##id##_VID_INSERT, \
RTL_REG_PORT##id##_TAG_INSERT, \
RTL_REG_PORT##id##_LINK, \
RTL_REG_PORT##id##_SPEED, \
RTL_REG_PORT##id##_NWAY, \
RTL_REG_PORT##id##_NRESTART, \
RTL_REG_PORT##id##_DUPLEX, \
RTL_REG_PORT##id##_RXEN, \
RTL_REG_PORT##id##_TXEN
RTL_PORT_ENUM(0),
RTL_PORT_ENUM(1),
RTL_PORT_ENUM(2),
RTL_PORT_ENUM(3),
RTL_PORT_ENUM(4),
RTL_PORT_ENUM(5),
};
static const struct rtl_reg rtl_regs[] = {
[RTL_REG_CHIPID] = { 0, 4, 30, 16, 0, 0 },
[RTL_REG_CHIPVER] = { 0, 4, 31, 8, 0, 0 },
[RTL_REG_CHIPTYPE] = { 0, 4, 31, 2, 8, 0 },
/* CPU port number */
[RTL_REG_CPUPORT] = { 2, 4, 21, 3, 0, 0 },
/* Enable CPU port function */
[RTL_REG_EN_CPUPORT] = { 3, 2, 21, 1, 15, 1 },
/* Enable CPU port tag insertion */
[RTL_REG_EN_TAG_OUT] = { 3, 2, 21, 1, 12, 0 },
/* Enable CPU port tag removal */
[RTL_REG_EN_TAG_CLR] = { 3, 2, 21, 1, 11, 0 },
/* Enable CPU port tag checking */
[RTL_REG_EN_TAG_IN] = { 0, 4, 21, 1, 7, 0 },
[RTL_REG_EN_TRUNK] = { 0, 0, 19, 1, 11, 1 },
[RTL_REG_TRUNK_PORTSEL] = { 0, 0, 16, 1, 6, 1 },
[RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 },
[RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 },
[RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 },
[RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 },
[RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 },
[RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16, 1, 10, 1 },
[RTL_REG_VLAN_ENABLE] = { 0, 0, 18, 1, 8, 1 },
#define RTL_VLAN_REGS(id, phy, page, regofs) \
[RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
[RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
RTL_VLAN_REGS( 0, 0, 0, 0),
RTL_VLAN_REGS( 1, 1, 0, 0),
RTL_VLAN_REGS( 2, 2, 0, 0),
RTL_VLAN_REGS( 3, 3, 0, 0),
RTL_VLAN_REGS( 4, 4, 0, 0),
RTL_VLAN_REGS( 5, 0, 1, 2),
RTL_VLAN_REGS( 6, 1, 1, 2),
RTL_VLAN_REGS( 7, 2, 1, 2),
RTL_VLAN_REGS( 8, 3, 1, 2),
RTL_VLAN_REGS( 9, 4, 1, 2),
RTL_VLAN_REGS(10, 0, 1, 4),
RTL_VLAN_REGS(11, 1, 1, 4),
RTL_VLAN_REGS(12, 2, 1, 4),
RTL_VLAN_REGS(13, 3, 1, 4),
RTL_VLAN_REGS(14, 4, 1, 4),
RTL_VLAN_REGS(15, 0, 1, 6),
#define REG_PORT_SETTING(port, phy) \
[RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
[RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
[RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
[RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
[RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
[RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
[RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
[RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
[RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
[RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
[RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
REG_PORT_SETTING(0, 0),
REG_PORT_SETTING(1, 1),
REG_PORT_SETTING(2, 2),
REG_PORT_SETTING(3, 3),
REG_PORT_SETTING(4, 4),
REG_PORT_SETTING(5, 6),
#define REG_PORT_PVID(phy, page, regofs) \
{ page, phy, 24 + regofs, 4, 12, 0 }
[RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
[RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
[RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
[RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
[RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
[RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
};
static inline void
rtl_set_page(struct rtl_priv *priv, unsigned int page)
{
struct mii_bus *bus = priv->bus;
u16 pgsel;
if (priv->fixup)
return;
if (priv->page == page)
return;
BUG_ON(page > RTL8306_NUM_PAGES);
pgsel = bus->read(bus, 0, RTL8306_REG_PAGE);
pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
if (page & (1 << 0))
pgsel |= RTL8306_REG_PAGE_LO;
if (!(page & (1 << 1))) /* bit is inverted */
pgsel |= RTL8306_REG_PAGE_HI;
bus->write(bus, 0, RTL8306_REG_PAGE, pgsel);
}
static inline int
rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val)
{
struct rtl_priv *priv = to_rtl(dev);
struct mii_bus *bus = priv->bus;
rtl_set_page(priv, page);
bus->write(bus, phy, reg, val);
bus->read(bus, phy, reg); /* flush */
return 0;
}
static inline int
rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg)
{
struct rtl_priv *priv = to_rtl(dev);
struct mii_bus *bus = priv->bus;
rtl_set_page(priv, page);
return bus->read(bus, phy, reg);
}
static inline u16
rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val)
{
struct rtl_priv *priv = to_rtl(dev);
struct mii_bus *bus = priv->bus;
u16 r;
rtl_set_page(priv, page);
r = bus->read(bus, phy, reg);
r &= ~mask;
r |= val;
bus->write(bus, phy, reg, r);
return bus->read(bus, phy, reg); /* flush */
}
static inline int
rtl_get(struct switch_dev *dev, enum rtl_regidx s)
{
const struct rtl_reg *r = &rtl_regs[s];
u16 val;
BUG_ON(s >= ARRAY_SIZE(rtl_regs));
if (r->bits == 0) /* unimplemented */
return 0;
val = rtl_r16(dev, r->page, r->phy, r->reg);
if (r->shift > 0)
val >>= r->shift;
if (r->inverted)
val = ~val;
val &= (1 << r->bits) - 1;
return val;
}
static int
rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val)
{
const struct rtl_reg *r = &rtl_regs[s];
u16 mask = 0xffff;
BUG_ON(s >= ARRAY_SIZE(rtl_regs));
if (r->bits == 0) /* unimplemented */
return 0;
if (r->shift > 0)
val <<= r->shift;
if (r->inverted)
val = ~val;
if (r->bits != 16) {
mask = (1 << r->bits) - 1;
mask <<= r->shift;
}
val &= mask;
return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val);
}
static void
rtl_fix_pvids(struct switch_dev *dev)
{
unsigned int port, vlan, mask;
for (port = 0; port < RTL8306_NUM_PORTS; port++)
{
/* skip tagged ports */
if (rtl_get(dev, RTL_PORT_REG(port, TAG_INSERT)) != 1)
continue;
for (vlan = 0; vlan < RTL8306_NUM_VLANS; vlan++)
{
mask = rtl_get(dev, RTL_VLAN_REG(vlan, PORTMASK));
/* skip non-members */
if (!(mask & (1 << port)))
continue;
rtl_set(dev, RTL_PORT_REG(port, PVID), vlan);
/* next port */
break;
}
}
}
static void
rtl_phy_save(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
{
regs->nway = rtl_get(dev, RTL_PORT_REG(port, NWAY));
regs->speed = rtl_get(dev, RTL_PORT_REG(port, SPEED));
regs->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
}
static void
rtl_phy_restore(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
{
rtl_set(dev, RTL_PORT_REG(port, NWAY), regs->nway);
rtl_set(dev, RTL_PORT_REG(port, SPEED), regs->speed);
rtl_set(dev, RTL_PORT_REG(port, DUPLEX), regs->duplex);
}
static void
rtl_port_set_enable(struct switch_dev *dev, int port, int enabled)
{
rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled);
rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled);
if ((port >= 5) || !enabled)
return;
/* restart autonegotiation if enabled */
rtl_set(dev, RTL_PORT_REG(port, NRESTART), 1);
}
static int
rtl_hw_apply(struct switch_dev *dev)
{
int i;
int trunk_en, trunk_psel;
struct rtl_phyregs port5;
rtl_phy_save(dev, 5, &port5);
/* disable rx/tx from PHYs */
for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
rtl_port_set_enable(dev, i, 0);
}
/* save trunking status */
trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK);
trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL);
/* trunk port 3 and 4
* XXX: Big WTF, but RealTek seems to do it */
rtl_set(dev, RTL_REG_EN_TRUNK, 1);
rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1);
/* execute the software reset */
rtl_set(dev, RTL_REG_RESET, 1);
/* wait for the reset to complete,
* but don't wait for too long */
for (i = 0; i < 10; i++) {
if (rtl_get(dev, RTL_REG_RESET) == 0)
break;
msleep(1);
}
/* enable rx/tx from PHYs */
for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
rtl_port_set_enable(dev, i, 1);
}
/* restore trunking settings */
rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en);
rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel);
rtl_phy_restore(dev, 5, &port5);
rtl_set(dev, RTL_REG_CPU_LINKUP, 1);
return 0;
}
static void
rtl_hw_init(struct switch_dev *dev)
{
struct rtl_priv *priv = to_rtl(dev);
int i;
rtl_set(dev, RTL_REG_VLAN_ENABLE, 0);
rtl_set(dev, RTL_REG_VLAN_FILTER, 0);
rtl_set(dev, RTL_REG_EN_TRUNK, 0);
rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0);
/* initialize cpu port settings */
if (priv->do_cpu) {
rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port);
rtl_set(dev, RTL_REG_EN_CPUPORT, 1);
} else {
rtl_set(dev, RTL_REG_CPUPORT, 7);
rtl_set(dev, RTL_REG_EN_CPUPORT, 0);
}
rtl_set(dev, RTL_REG_EN_TAG_OUT, 0);
rtl_set(dev, RTL_REG_EN_TAG_IN, 0);
rtl_set(dev, RTL_REG_EN_TAG_CLR, 0);
/* reset all vlans */
for (i = 0; i < RTL8306_NUM_VLANS; i++) {
rtl_set(dev, RTL_VLAN_REG(i, VID), i);
rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0);
}
#ifdef DEBUG
/* default to port isolation */
for (i = 0; i < RTL8306_NUM_PORTS; i++) {
if (i != dev->cpu_port)
rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), (1 << dev->cpu_port) | (1 << i));
rtl_set(dev, RTL_PORT_REG(i, PVID), i);
rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3);
}
#endif
rtl_fix_pvids(dev);
rtl_hw_apply(dev);
}
#ifdef DEBUG
static int
rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
struct rtl_priv *priv = to_rtl(dev);
priv->do_cpu = val->value.i;
rtl_hw_init(dev);
return 0;
}
static int
rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
struct rtl_priv *priv = to_rtl(dev);
val->value.i = priv->do_cpu;
return 0;
}
static int
rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
dev->cpu_port = val->value.i;
rtl_hw_init(dev);
return 0;
}
static int
rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
val->value.i = dev->cpu_port;
return 0;
}
#endif
static int
rtl_reset(struct switch_dev *dev)
{
rtl_hw_init(dev);
return 0;
}
static int
rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
int idx = attr->id + (val->port_vlan * attr->ofs);
struct rtl_phyregs port;
if (attr->id >= ARRAY_SIZE(rtl_regs))
return -EINVAL;
if ((attr->max > 0) && (val->value.i > attr->max))
return -EINVAL;
/* access to phy register 22 on port 4/5
* needs phy status save/restore */
if ((val->port_vlan > 3) &&
(rtl_regs[idx].reg == 22) &&
(rtl_regs[idx].page == 0)) {
rtl_phy_save(dev, val->port_vlan, &port);
rtl_set(dev, idx, val->value.i);
rtl_phy_restore(dev, val->port_vlan, &port);
} else {
rtl_set(dev, idx, val->value.i);
}
return 0;
}
static int
rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
int idx = attr->id + (val->port_vlan * attr->ofs);
if (idx >= ARRAY_SIZE(rtl_regs))
return -EINVAL;
val->value.i = rtl_get(dev, idx);
return 0;
}
#ifdef DEBUG
static int
rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
if (val->port_vlan >= RTL8306_NUM_PORTS)
return -EINVAL;
return rtl_attr_set_int(dev, attr, val);
}
static int
rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
if (val->port_vlan >= RTL8306_NUM_PORTS)
return -EINVAL;
return rtl_attr_get_int(dev, attr, val);
}
#endif
static int
rtl_attr_set_port_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
unsigned int vlan;
if (val->port_vlan >= RTL8306_NUM_PORTS)
return -EINVAL;
for (vlan = 0; vlan < RTL8306_NUM_VLANS; vlan++) {
if (rtl_get(dev, RTL_VLAN_REG(vlan, VID)) == val->value.i) {
rtl_set(dev, RTL_PORT_REG(val->port_vlan, PVID), vlan);
break;
}
}
return 0;
}
static int
rtl_attr_get_port_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
unsigned int vlan;
if (val->port_vlan >= RTL8306_NUM_PORTS)
return -EINVAL;
vlan = rtl_get(dev, RTL_PORT_REG(val->port_vlan, PVID));
val->value.i = rtl_get(dev, RTL_VLAN_REG(vlan, VID));
return 0;
}
static int
rtl_get_port_link(struct switch_dev *dev, int port, struct switch_port_link *link)
{
if (port >= RTL8306_NUM_PORTS)
return -EINVAL;
link->link = rtl_get(dev, RTL_PORT_REG(port, LINK));
if (!link->link)
return 0;
link->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
link->aneg = rtl_get(dev, RTL_PORT_REG(port, NWAY));
if (rtl_get(dev, RTL_PORT_REG(port, SPEED)))
link->speed = SWITCH_PORT_SPEED_100;
else
link->speed = SWITCH_PORT_SPEED_10;
return 0;
}
static int
rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
if (val->port_vlan >= dev->vlans)
return -EINVAL;
return rtl_attr_set_int(dev, attr, val);
}
static int
rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
if (val->port_vlan >= dev->vlans)
return -EINVAL;
return rtl_attr_get_int(dev, attr, val);
}
static int
rtl_get_ports(struct switch_dev *dev, struct switch_val *val)
{
unsigned int i, mask;
mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
for (i = 0; i < RTL8306_NUM_PORTS; i++) {
struct switch_port *port;
if (!(mask & (1 << i)))
continue;
port = &val->value.ports[val->len];
port->id = i;
if (rtl_get(dev, RTL_PORT_REG(i, TAG_INSERT)) == 2)
port->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
val->len++;
}
return 0;
}
static int
rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
struct rtl_priv *priv = to_rtl(dev);
struct rtl_phyregs port;
int en = val->value.i;
int i;
rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu);
rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu);
rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu);
rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en);
if (en)
rtl_set(dev, RTL_REG_VLAN_FILTER, en);
for (i = 0; i < RTL8306_NUM_PORTS; i++) {
if (i > 3)
rtl_phy_save(dev, val->port_vlan, &port);
rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? 1 : 3));
if (i > 3)
rtl_phy_restore(dev, val->port_vlan, &port);
}
rtl_set(dev, RTL_REG_VLAN_ENABLE, en);
rtl_fix_pvids(dev);
return 0;
}
static int
rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
{
val->value.i = rtl_get(dev, RTL_REG_VLAN_ENABLE);
return 0;
}
static int
rtl_set_ports(struct switch_dev *dev, struct switch_val *val)
{
unsigned int mask = 0;
int i;
for(i = 0; i < val->len; i++)
{
struct switch_port *port = &val->value.ports[i];
bool tagged = false;
mask |= (1 << port->id);
if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
tagged = true;
rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1));
rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1));
rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1));
}
rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask);
rtl_fix_pvids(dev);
return 0;
}
static struct switch_attr rtl_globals[] = {
{
.type = SWITCH_TYPE_INT,
.name = "enable_vlan",
.description = "Enable VLAN mode",
.max = 1,
.set = rtl_set_vlan,
.get = rtl_get_vlan,
},
{
RTL_GLOBAL_REGATTR(EN_TRUNK),
.name = "trunk",
.description = "Enable port trunking",
.max = 1,
},
{
RTL_GLOBAL_REGATTR(TRUNK_PORTSEL),
.name = "trunk_sel",
.description = "Select ports for trunking (0: 0,1 - 1: 3,4)",
.max = 1,
},
#ifdef DEBUG
{
RTL_GLOBAL_REGATTR(VLAN_FILTER),
.name = "vlan_filter",
.description = "Filter incoming packets for allowed VLANS",
.max = 1,
},
{
.type = SWITCH_TYPE_INT,
.name = "cpuport",
.description = "CPU Port",
.set = rtl_set_cpuport,
.get = rtl_get_cpuport,
.max = RTL8306_NUM_PORTS,
},
{
.type = SWITCH_TYPE_INT,
.name = "use_cpuport",
.description = "CPU Port handling flag",
.set = rtl_set_use_cpuport,
.get = rtl_get_use_cpuport,
.max = RTL8306_NUM_PORTS,
},
{
RTL_GLOBAL_REGATTR(TRAP_CPU),
.name = "trap_cpu",
.description = "VLAN trap to CPU",
.max = 1,
},
{
RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE),
.name = "vlan_tag_aware",
.description = "Enable VLAN tag awareness",
.max = 1,
},
{
RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY),
.name = "tag_only",
.description = "Only accept tagged packets",
.max = 1,
},
#endif
};
static struct switch_attr rtl_port[] = {
{
.type = SWITCH_TYPE_INT,
.set = rtl_attr_set_port_pvid,
.get = rtl_attr_get_port_pvid,
.name = "pvid",
.description = "Port VLAN ID",
.max = 4095,
},
#ifdef DEBUG
{
RTL_PORT_REGATTR(NULL_VID_REPLACE),
.name = "null_vid",
.description = "NULL VID gets replaced by port default vid",
.max = 1,
},
{
RTL_PORT_REGATTR(NON_PVID_DISCARD),
.name = "non_pvid_discard",
.description = "discard packets with VID != PVID",
.max = 1,
},
{
RTL_PORT_REGATTR(VID_INSERT),
.name = "vid_insert_remove",
.description = "how should the switch insert and remove vids ?",
.max = 3,
},
{
RTL_PORT_REGATTR(TAG_INSERT),
.name = "tag_insert",
.description = "tag insertion handling",
.max = 3,
},
#endif
};
static struct switch_attr rtl_vlan[] = {
{
RTL_VLAN_REGATTR(VID),
.name = "vid",
.description = "VLAN ID (1-4095)",
.max = 4095,
},
};
static const struct switch_dev_ops rtl8306_ops = {
.attr_global = {
.attr = rtl_globals,
.n_attr = ARRAY_SIZE(rtl_globals),
},
.attr_port = {
.attr = rtl_port,
.n_attr = ARRAY_SIZE(rtl_port),
},
.attr_vlan = {
.attr = rtl_vlan,
.n_attr = ARRAY_SIZE(rtl_vlan),
},
.get_vlan_ports = rtl_get_ports,
.set_vlan_ports = rtl_set_ports,
.apply_config = rtl_hw_apply,
.reset_switch = rtl_reset,
.get_port_link = rtl_get_port_link,
};
static int
rtl8306_config_init(struct phy_device *pdev)
{
struct net_device *netdev = pdev->attached_dev;
struct rtl_priv *priv = pdev->priv;
struct switch_dev *dev = &priv->dev;
struct switch_val val;
unsigned int chipid, chipver, chiptype;
int err;
/* Only init the switch for the primary PHY */
if (pdev->addr != 0)
return 0;
val.value.i = 1;
priv->dev.cpu_port = RTL8306_PORT_CPU;
priv->dev.ports = RTL8306_NUM_PORTS;
priv->dev.vlans = RTL8306_NUM_VLANS;
priv->dev.ops = &rtl8306_ops;
priv->do_cpu = 0;
priv->page = -1;
priv->bus = pdev->bus;
chipid = rtl_get(dev, RTL_REG_CHIPID);
chipver = rtl_get(dev, RTL_REG_CHIPVER);
chiptype = rtl_get(dev, RTL_REG_CHIPTYPE);
switch(chiptype) {
case 0:
case 2:
strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname));
priv->type = RTL_TYPE_S;
break;
case 1:
strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname));
priv->type = RTL_TYPE_SD;
break;
case 3:
strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname));
priv->type = RTL_TYPE_SDM;
break;
default:
strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname));
break;
}
dev->name = priv->hwname;
rtl_hw_init(dev);
printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver);
err = register_switch(dev, netdev);
if (err < 0) {
kfree(priv);
return err;
}
return 0;
}
static int
rtl8306_fixup(struct phy_device *pdev)
{
struct rtl_priv priv;
u16 chipid;
/* Attach to primary LAN port and WAN port */
if (pdev->addr != 0 && pdev->addr != 4)
return 0;
memset(&priv, 0, sizeof(priv));
priv.fixup = true;
priv.page = -1;
priv.bus = pdev->bus;
chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
if (chipid == 0x5988)
pdev->phy_id = RTL8306_MAGIC;
return 0;
}
static int
rtl8306_probe(struct phy_device *pdev)
{
struct rtl_priv *priv;
list_for_each_entry(priv, &phydevs, list) {
/*
* share one rtl_priv instance between virtual phy
* devices on the same bus
*/
if (priv->bus == pdev->bus)
goto found;
}
priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->bus = pdev->bus;
found:
pdev->priv = priv;
return 0;
}
static void
rtl8306_remove(struct phy_device *pdev)
{
struct rtl_priv *priv = pdev->priv;
unregister_switch(&priv->dev);
kfree(priv);
}
static int
rtl8306_config_aneg(struct phy_device *pdev)
{
struct rtl_priv *priv = pdev->priv;
/* Only for WAN */
if (pdev->addr == 0)
return 0;
/* Restart autonegotiation */
rtl_set(&priv->dev, RTL_PORT_REG(4, NWAY), 1);
rtl_set(&priv->dev, RTL_PORT_REG(4, NRESTART), 1);
return 0;
}
static int
rtl8306_read_status(struct phy_device *pdev)
{
struct rtl_priv *priv = pdev->priv;
struct switch_dev *dev = &priv->dev;
if (pdev->addr == 4) {
/* WAN */
pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
pdev->link = !!rtl_get(dev, RTL_PORT_REG(4, LINK));
} else {
/* LAN */
pdev->speed = SPEED_100;
pdev->duplex = DUPLEX_FULL;
pdev->link = 1;
}
/*
* Bypass generic PHY status read,
* it doesn't work with this switch
*/
if (pdev->link) {
pdev->state = PHY_RUNNING;
netif_carrier_on(pdev->attached_dev);
pdev->adjust_link(pdev->attached_dev);
} else {
pdev->state = PHY_NOLINK;
netif_carrier_off(pdev->attached_dev);
pdev->adjust_link(pdev->attached_dev);
}
return 0;
}
static struct phy_driver rtl8306_driver = {
.name = "Realtek RTL8306S",
.flags = PHY_HAS_MAGICANEG,
.phy_id = RTL8306_MAGIC,
.phy_id_mask = 0xffffffff,
.features = PHY_BASIC_FEATURES,
.probe = &rtl8306_probe,
.remove = &rtl8306_remove,
.config_init = &rtl8306_config_init,
.config_aneg = &rtl8306_config_aneg,
.read_status = &rtl8306_read_status,
.driver = { .owner = THIS_MODULE,},
};
static int __init
rtl_init(void)
{
phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
return phy_driver_register(&rtl8306_driver);
}
static void __exit
rtl_exit(void)
{
phy_driver_unregister(&rtl8306_driver);
}
module_init(rtl_init);
module_exit(rtl_exit);
MODULE_LICENSE("GPL");