openwrtv3/target/linux/brcm63xx/dts/vr-3026e.dts
Jonas Gorski a89f5e795a brcm63xx: move the bootargs into the dtb files
Instead of using a fixed commandline, allow one per device.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00

92 lines
1.5 KiB
Text

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VR-3026e";
compatible = "comtrend,vr-3026e", "brcm,bcm6368";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl_green {
label = "VR-3026e:green:dsl";
gpios = <&gpio0 2 1>;
};
inet_green {
label = "VR-3026e:green:inet";
gpios = <&gpio0 5 0>;
};
lan1_green {
label = "VR-3026e:green:lan1";
gpios = <&gpio0 6 1>;
};
lan2_green {
label = "VR-3026e:green:lan2";
gpios = <&gpio0 7 1>;
};
lan3_green {
label = "VR-3026e:green:lan3";
gpios = <&gpio0 8 1>;
};
lan4_green {
label = "VR-3026e:green:lan4";
gpios = <&gpio0 9 1>;
};
power_green {
label = "VR-3026e:green:power";
gpios = <&gpio0 22 0>;
default-state = "on";
};
power_red {
label = "VR-3026e:red:power";
gpios = <&gpio0 24 0>;
};
inet_red {
label = "VR-3026e:red:inet";
gpios = <&gpio0 31 0>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};