dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
164 lines
4.1 KiB
Makefile
164 lines
4.1 KiB
Makefile
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
include $(INCLUDE_DIR)/host.mk
|
|
|
|
DEVICE_VARS += DEVICE_DTS DEVICE_PROFILE IMAGE_SIZE DTB_SIZE
|
|
|
|
define Device/Default
|
|
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
|
|
DEVICE_PROFILE :=
|
|
DEVICE_DTS :=
|
|
KERNEL_ENTRY := 0x00000000
|
|
KERNEL_LOADADDR := 0x00000000
|
|
endef
|
|
|
|
define Build/dtb
|
|
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
|
|
endef
|
|
|
|
ifeq ($(SUBTARGET),nand)
|
|
|
|
define Image/cpiogz
|
|
( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
|
|
endef
|
|
|
|
define Build/copy-file
|
|
cat "$(1)" > "$@"
|
|
endef
|
|
|
|
define Build/MerakiAdd-dtb
|
|
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
|
|
( \
|
|
dd if=$@.dtb bs=$(DTB_SIZE) conv=sync; \
|
|
dd if=$@ bs=$(BLOCKSIZE) conv=sync; \
|
|
) > $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/MerakiAdd-initramfs
|
|
$(call Image/cpiogz)
|
|
|
|
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
|
|
-C gzip -n "$(PROFILE) rootfs" \
|
|
-d $(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz \
|
|
$(KDIR_TMP)/$(IMG_PREFIX)-uramdisk.image.gz
|
|
|
|
( \
|
|
dd if=$@ bs=1k conv=sync; \
|
|
dd if=$(KDIR_TMP)/$(IMG_PREFIX)-uramdisk.image.gz bs=$(BLOCKSIZE) conv=sync; \
|
|
) > $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/MerakiNAND
|
|
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
|
|
-B $(DEVICE_PROFILE) -s \
|
|
-i $@ \
|
|
-o $@.new
|
|
@cp $@.new $@
|
|
endef
|
|
|
|
define Device/mr24
|
|
DEVICE_TITLE := Cisco Meraki MR24
|
|
DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k wpad-mini
|
|
DEVICE_PROFILE := MR24
|
|
DEVICE_DTS := MR24
|
|
BLOCKSIZE := 64512
|
|
IMAGES := sysupgrade.tar
|
|
DTB_SIZE := 64512
|
|
KERNEL_SIZE := 2048k
|
|
IMAGE_SIZE := 8191k
|
|
KERNEL := kernel-bin | lzma | uImage lzma | MerakiAdd-dtb | MerakiNAND
|
|
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | lzma | uImage lzma | MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | MerakiNAND
|
|
IMAGE/sysupgrade.tar := sysupgrade-nand
|
|
endef
|
|
TARGET_DEVICES += mr24
|
|
|
|
endif
|
|
|
|
ifeq ($(SUBTARGET),sata)
|
|
|
|
### Image scripts for the WD My Book Live Series ###
|
|
define Build/boot-script
|
|
$(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
|
|
-d mbl_boot.scr \
|
|
$@.scr
|
|
endef
|
|
|
|
define Build/boot-img
|
|
$(RM) -rf $@.bootdir
|
|
mkdir -p $@.bootdir/boot
|
|
|
|
$(CP) $@.scr $@.bootdir/boot/boot.scr
|
|
$(CP) $@.dtb $@.bootdir/boot/$(DEVICE_DTB)
|
|
$(CP) $(word 1,$^) $@.bootdir/boot/uImage
|
|
|
|
genext2fs --block-size $(BLOCKSIZE) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
|
|
|
|
# convert it to revision 1 - needed for u-boot ext2load
|
|
$(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
|
|
$(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
|
|
endef
|
|
|
|
define Build/hdd-img
|
|
./mbl_gen_hdd_img.sh $@ $@.boot $(word 2,$^)
|
|
$(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
|
|
endef
|
|
|
|
define Build/uRamdisk
|
|
$(call Image/mkfs/ext4)
|
|
gzip -9n -c $(KDIR)/root.ext4 > $(KDIR)/root.ext4.gz
|
|
$(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T ramdisk -C gzip -n "$(PROFILE) rootfs" \
|
|
-d $(KDIR)/root.ext4.gz \
|
|
$@.uRamdisk
|
|
endef
|
|
|
|
define Build/recovery-tar
|
|
sh ./mbl_gen_recovery_tar.sh \
|
|
--profile $(DEVICE_PROFILE) \
|
|
--dtb $@.dtb \
|
|
--dtbname $(DEVICE_DTB) \
|
|
--kernel $@ \
|
|
--rootfs $@.uRamdisk \
|
|
$@
|
|
endef
|
|
|
|
define Device/MyBookLiveDefault
|
|
IMAGE_SIZE := 48m
|
|
BLOCKSIZE := 1024
|
|
DTB_SIZE := 16384
|
|
KERNEL := kernel-bin | gzip | uImage gzip
|
|
BOOT_SIZE := 8
|
|
IMAGES := rootfs.img recovery.tar
|
|
DEVICE_DTB := apollo3g.dtb
|
|
IMAGE/rootfs.img := boot-script | dtb | boot-img | hdd-img
|
|
IMAGE/recovery.tar := kernel-bin | dtb | uRamdisk | recovery-tar
|
|
endef
|
|
|
|
define Device/MyBookLiveSingle
|
|
$(Device/MyBookLiveDefault)
|
|
DEVICE_TITLE := Western Digital My Book Live
|
|
DEVICE_DTS := apollo3g
|
|
DEVICE_PROFILE := apollo3g
|
|
endef
|
|
|
|
TARGET_DEVICES += MyBookLiveSingle
|
|
|
|
define Device/MyBookLiveDuo
|
|
$(Device/MyBookLiveDefault)
|
|
DEVICE_TITLE := Western Digital My Book Live Duo
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-ledtrig-usbdev kmod-usb-storage kmod-fs-vfat wpad-mini
|
|
DEVICE_DTS := apollo3g-duo
|
|
DEVICE_PROFILE := ap2nc
|
|
endef
|
|
|
|
TARGET_DEVICES += MyBookLiveDuo
|
|
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|
|
|