dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
36 lines
624 B
Bash
36 lines
624 B
Bash
. /lib/functions.sh
|
|
|
|
get_magic_at() {
|
|
local file="$1"
|
|
local pos="$2"
|
|
get_image "$file" | dd bs=1 count=2 skip="$pos" 2>/dev/null | hexdump -v -n 2 -e '1/1 "%02x"'
|
|
}
|
|
|
|
mbl_do_platform_check() {
|
|
local board="$1"
|
|
local file="$2"
|
|
local magic
|
|
|
|
magic=$(get_magic_at "$file" 510)
|
|
|
|
[ "$magic" != "55aa" ] && {
|
|
echo "Failed to verify MBR boot signature."
|
|
return 1
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
mbl_do_upgrade() {
|
|
sync
|
|
get_image "$1" | dd of=/dev/sda bs=2M conv=fsync
|
|
sleep 1
|
|
}
|
|
|
|
mbl_copy_config() {
|
|
mkdir -p /boot
|
|
[ -f /boot/uImage ] || mount -t ext4 -o rw,noatime /dev/sda1 /boot
|
|
cp -af "$CONF_TAR" /boot/
|
|
sync
|
|
umount /boot
|
|
}
|