openwrtv3

No description

Find a file

Gabor Juhos dbb6051caf add alternative board id for the ZyXEL P-334WT SVN-Revision: 12232		2008-08-07 08:49:23 +00:00
docs	add script for managing 'build environments' (.config+files/), including documentation	2008-08-06 14:30:46 +00:00
include	move arch-specific definitions to arch site files	2008-08-06 23:05:19 +00:00
package	allow ctrl-c to trigger preinit	2008-08-07 07:17:03 +00:00
scripts	and another one	2008-08-06 16:14:53 +00:00
target	add alternative board id for the ZyXEL P-334WT	2008-08-07 08:49:23 +00:00
toolchain	storm is ARMv4, not ARMv4T (thx, SeG)	2008-07-31 16:51:43 +00:00
tools	fix mkfwimage to recognize the -s option	2008-07-28 20:48:06 +00:00
.gitignore	add missing gitignore change for build environments	2008-08-06 14:34:18 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	adds missing patch for native toolchain	2008-06-10 07:18:41 +00:00
feeds.conf	adds luci to the feeds.conf file	2008-07-28 17:12:52 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	make package prereq checks behave more like build prereq checks (first check all, then fail if necessary), also make them less verbose	2008-08-04 23:15:17 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
rules.mk	add a variable that contains the proper architecture-dependent -fPIC/-fpic cflag for building shared libraries	2008-08-06 22:10:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org