openwrtv3/target/linux/brcm63xx/dts/nb6-ser-r0.dts
Jonas Gorski a27d59bb42 brcm63xx: switch to new partition layout specification
Now that we support parsing the expected upstream definition, update
the dts files to it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-11 23:15:05 +01:00

96 lines
1.6 KiB
Text

/dts-v1/;
#include "bcm6362.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "SFR neufbox 6 (Sercomm)";
compatible = "sfr,nb6-ser-r0", "brcm,bcm6362";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
service {
label = "service";
gpios = <&pinctrl 10 1>;
linux,code = <BTN_0>;
};
wlan {
label = "wlan";
gpios = <&pinctrl 12 1>;
linux,code = <KEY_WLAN>;
};
reset {
label = "reset";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&pinctrl 25 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
switch {
compatible = "realtek,rtl8367";
gpio-sda = <&pinctrl 18 0>;
gpio-sck = <&pinctrl 20 0>;
realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
linux,part-probe = "bcm63xxpart";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0xfe0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
};
&uart0 {
status = "ok";
};