openwrtv3/package/boot/uboot-lantiq/patches/0016-net-add-driver-for-Lantiq-XWAY-ARX100-switch.patch
John Crispin 03a777c293 Refresh patches
Refresh uboot-lantiq patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40546
2014-04-22 08:08:19 +00:00

546 lines
14 KiB
Diff

From 7288414298b34dcda1216fee1fe38d05ea0027a2 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Mon, 17 Dec 2012 23:32:39 +0100
Subject: net: add driver for Lantiq XWAY ARX100 switch
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
--- a/arch/mips/include/asm/arch-arx100/config.h
+++ b/arch/mips/include/asm/arch-arx100/config.h
@@ -10,17 +10,21 @@
* and drivers for this SoC:
*
* CONFIG_LTQ_SUPPORT_UART
- * - support the Danube ASC/UART interface and console
+ * - support the ARX100 ASC/UART interface and console
*
* CONFIG_LTQ_SUPPORT_NOR_FLASH
* - support a parallel NOR flash via the CFI interface in flash bank 0
*
* CONFIG_LTQ_SUPPORT_ETHERNET
- * - support the Danube ETOP and MAC interface
+ * - support the ARX100 ETOP and MAC interface
*
* CONFIG_LTQ_SUPPORT_SPI_FLASH
- * - support the Danube SPI interface and serial flash drivers
+ * - support the ARX100 SPI interface and serial flash drivers
* - specific SPI flash drivers must be configured separately
+ *
+ * CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH
+ * - build a preloader that runs in the internal SRAM and loads
+ * the U-Boot from SPI flash into RAM
*/
#ifndef __ARX100_CONFIG_H__
--- /dev/null
+++ b/arch/mips/include/asm/arch-arx100/switch.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012-2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ARX100_SWITCH_H__
+#define __ARX100_SWITCH_H__
+
+struct ar9_switch_regs {
+ __be32 ps; /* Port status*/
+ __be32 p0_ctl; /* Port 0 control */
+ __be32 p1_ctl; /* Port 1 control */
+ __be32 p2_ctl; /* Port 2 control */
+ __be32 p0_vlan; /* Port 0 VLAN control */
+ __be32 p1_vlan; /* Port 1 VLAN control */
+ __be32 p2_vlan; /* Port 2 VLAN control */
+ __be32 p0_inctl; /* Port 0 ingress control */
+ __be32 p1_inctl; /* Port 1 ingress control */
+ __be32 p2_inctl; /* Port 2 ingress control */
+ u32 rsvd0[16];
+ __be32 sw_gctl0; /* Switch global control 0 */
+ __be32 sw_gctl1; /* Switch global control 1 */
+ __be32 arp; /* ARP/RARP */
+ __be32 strm_ctl; /* Storm control */
+ __be32 rgmii_ctl; /* RGMII/GMII port control */
+ u32 rsvd1[4];
+ __be32 pmac_hd_ctl; /* PMAC header control */
+ u32 rsvd2[15];
+ __be32 mdio_ctrl; /* MDIO indirect access control */
+ __be32 mdio_data; /* MDIO indirect read data */
+};
+
+#define BUILD_CHECK_AR9_REG(name, offset) \
+ BUILD_BUG_ON(offsetof(struct ar9_switch_regs, name) != (offset))
+
+static inline void build_check_ar9_registers(void)
+{
+ BUILD_CHECK_AR9_REG(sw_gctl0, 0x68);
+ BUILD_CHECK_AR9_REG(rgmii_ctl, 0x78);
+ BUILD_CHECK_AR9_REG(pmac_hd_ctl, 0x8c);
+ BUILD_CHECK_AR9_REG(mdio_ctrl, 0xcc);
+ BUILD_CHECK_AR9_REG(mdio_data, 0xd0);
+}
+
+#define P0_CTL_FLP (1 << 18)
+#define P0_CTL_FLD (1 << 17)
+
+#define SW_GCTL0_SE (1 << 31)
+
+#define RGMII_CTL_P1_SHIFT 10
+#define RGMII_CTL_P1_MASK (0x3FF << RGMII_CTL_P1_SHIFT)
+#define RGMII_CTL_P0_MASK 0x3FF
+#define RGMII_CTL_P0IS_SHIFT 8
+#define RGMII_CTL_P0IS_RGMII (0x0 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0IS_MII (0x1 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0IS_REVMII (0x2 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0IS_RMII (0x3 << RGMII_CTL_P0IS_SHIFT)
+#define RGMII_CTL_P0RDLY_SHIFT 6
+#define RGMII_CTL_P0RDLY_0_0 (0x0 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0RDLY_1_5 (0x1 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0RDLY_1_75 (0x2 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0RDLY_2_0 (0x3 << RGMII_CTL_P0RDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_SHIFT 4
+#define RGMII_CTL_P0TDLY_0_0 (0x0 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_1_5 (0x1 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_1_75 (0x2 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0TDLY_2_0 (0x3 << RGMII_CTL_P0TDLY_SHIFT)
+#define RGMII_CTL_P0SPD_SHIFT 2
+#define RGMII_CTL_P0SPD_10 (0x0 << RGMII_CTL_P0SPD_SHIFT)
+#define RGMII_CTL_P0SPD_100 (0x1 << RGMII_CTL_P0SPD_SHIFT)
+#define RGMII_CTL_P0SPD_1000 (0x2 << RGMII_CTL_P0SPD_SHIFT)
+#define RGMII_CTL_P0DUP_FULL (1 << 1)
+#define RGMII_CTL_P0FCE_EN (1 << 0)
+
+#define PMAC_HD_CTL_AC (1 << 18)
+
+#define MDIO_CTRL_WD_SHIFT 16
+#define MDIO_CTRL_MBUSY (1 << 15)
+#define MDIO_CTRL_OP_READ (1 << 11)
+#define MDIO_CTRL_OP_WRITE (1 << 10)
+#define MDIO_CTRL_PHYAD_SHIFT 5
+#define MDIO_CTRL_PHYAD_MASK (0x1f << MDIO_CTRL_PHYAD_SHIFT)
+#define MDIO_CTRL_REGAD_MASK 0x1f
+
+#endif /* __ARX100_SWITCH_H__ */
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -38,6 +38,7 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks86
COBJS-$(CONFIG_KS8851_MLL) += ks8851_mll.o
COBJS-$(CONFIG_LAN91C96) += lan91c96.o
COBJS-$(CONFIG_LANTIQ_DANUBE_ETOP) += lantiq_danube_etop.o
+COBJS-$(CONFIG_LANTIQ_ARX100_SWITCH) += lantiq_arx100_switch.o
COBJS-$(CONFIG_LANTIQ_VRX200_SWITCH) += lantiq_vrx200_switch.o
COBJS-$(CONFIG_MACB) += macb.o
COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
--- /dev/null
+++ b/drivers/net/lantiq_arx100_switch.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <switch.h>
+#include <linux/compiler.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/pm.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/dma.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/switch.h>
+
+#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
+#define LTQ_ETH_TX_BUFFER_CNT 8
+#define LTQ_ETH_RX_DATA_SIZE PKTSIZE_ALIGN
+#define LTQ_ETH_IP_ALIGN 2
+
+#define LTQ_MDIO_DRV_NAME "ltq-mdio"
+#define LTQ_ETH_DRV_NAME "ltq-eth"
+
+#define LTQ_ETHSW_MAX_GMAC 2
+#define LTQ_ETHSW_PMAC 2
+
+struct ltq_eth_priv {
+ struct ltq_dma_device dma_dev;
+ struct mii_dev *bus;
+ struct eth_device *dev;
+ struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
+ int rx_num;
+ int tx_num;
+};
+
+static struct ar9_switch_regs *switch_regs =
+ (struct ar9_switch_regs *) CKSEG1ADDR(LTQ_SWITCH_BASE);
+
+static int ltq_mdio_is_busy(void)
+{
+ u32 mdio_ctrl = ltq_readl(&switch_regs->mdio_ctrl);
+
+ return mdio_ctrl & MDIO_CTRL_MBUSY;
+}
+
+static void ltq_mdio_poll(void)
+{
+ while (ltq_mdio_is_busy())
+ cpu_relax();
+
+ __udelay(1000);
+}
+
+static int ltq_mdio_read(struct mii_dev *bus, int phyad, int devad,
+ int regad)
+{
+ u32 mdio_ctrl;
+ int retval;
+
+ mdio_ctrl = MDIO_CTRL_MBUSY | MDIO_CTRL_OP_READ |
+ ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
+ (regad & MDIO_CTRL_REGAD_MASK);
+
+ ltq_mdio_poll();
+ ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl);
+ ltq_mdio_poll();
+ retval = ltq_readl(&switch_regs->mdio_data);
+ ltq_writel(&switch_regs->mdio_data, 0xFFFF);
+
+ debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, retval);
+
+ return retval;
+}
+
+static int ltq_mdio_write(struct mii_dev *bus, int phyad, int devad,
+ int regad, u16 val)
+{
+ u32 mdio_ctrl;
+
+ debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, val);
+
+ mdio_ctrl = (val << MDIO_CTRL_WD_SHIFT) | MDIO_CTRL_MBUSY |
+ MDIO_CTRL_OP_WRITE |
+ ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
+ (regad & MDIO_CTRL_REGAD_MASK);
+
+ ltq_mdio_poll();
+ ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl);
+
+ return 0;
+}
+
+static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
+{
+}
+
+static inline u8 *ltq_eth_rx_packet_align(int rx_num)
+{
+ u8 *packet = (u8 *) NetRxPackets[rx_num];
+
+ /*
+ * IP header needs
+ */
+ return packet + LTQ_ETH_IP_ALIGN;
+}
+
+static int ltq_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ struct phy_device *phydev;
+ int i;
+
+ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
+ phydev = priv->phymap[i];
+ if (!phydev)
+ continue;
+
+ phy_startup(phydev);
+ ltq_eth_gmac_update(phydev, i);
+ }
+
+ for (i = 0; i < LTQ_ETH_RX_BUFFER_CNT; i++)
+ ltq_dma_rx_map(dma_dev, i, ltq_eth_rx_packet_align(i),
+ LTQ_ETH_RX_DATA_SIZE);
+
+ ltq_dma_enable(dma_dev);
+
+ priv->rx_num = 0;
+ priv->tx_num = 0;
+
+ return 0;
+}
+
+static void ltq_eth_halt(struct eth_device *dev)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ struct phy_device *phydev;
+ int i;
+
+ ltq_dma_reset(dma_dev);
+
+ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
+ phydev = priv->phymap[i];
+ if (!phydev)
+ continue;
+
+ phy_shutdown(phydev);
+ phydev->link = 0;
+ ltq_eth_gmac_update(phydev, i);
+ }
+}
+
+static int ltq_eth_send(struct eth_device *dev, void *packet, int length)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ int err;
+
+ err = ltq_dma_tx_map(dma_dev, priv->tx_num, packet, length, 10);
+ if (err) {
+ puts("NET: timeout on waiting for TX descriptor\n");
+ return -1;
+ }
+
+ priv->tx_num = (priv->tx_num + 1) % LTQ_ETH_TX_BUFFER_CNT;
+
+ return err;
+}
+
+static int ltq_eth_recv(struct eth_device *dev)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ u8 *packet;
+ int len;
+
+ if (!ltq_dma_rx_poll(dma_dev, priv->rx_num))
+ return 0;
+
+#if 0
+ printf("%s: rx_num %d\n", __func__, priv->rx_num);
+#endif
+
+ len = ltq_dma_rx_length(dma_dev, priv->rx_num);
+ packet = ltq_eth_rx_packet_align(priv->rx_num);
+
+#if 0
+ printf("%s: received: packet %p, len %u, rx_num %d\n",
+ __func__, packet, len, priv->rx_num);
+#endif
+
+ if (len)
+ NetReceive(packet, len);
+
+ ltq_dma_rx_map(dma_dev, priv->rx_num, packet,
+ LTQ_ETH_RX_DATA_SIZE);
+
+ priv->rx_num = (priv->rx_num + 1) % LTQ_ETH_RX_BUFFER_CNT;
+
+ return 0;
+}
+
+static void ltq_eth_pmac_init(void)
+{
+ /* Add CRC to packets from DMA to PMAC */
+ ltq_setbits(&switch_regs->pmac_hd_ctl, PMAC_HD_CTL_AC);
+
+ /* Force link up */
+ ltq_setbits(&switch_regs->p2_ctl, P0_CTL_FLP);
+}
+
+static void ltq_eth_hw_init(const struct ltq_eth_port_config *port)
+{
+ /* Power up ethernet subsystems */
+ ltq_pm_enable(LTQ_PM_ETH);
+
+ /* Enable switch core */
+ ltq_setbits(&switch_regs->sw_gctl0, SW_GCTL0_SE);
+
+ /* MII/MDIO */
+ gpio_set_altfunc(42, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* MII/MDC */
+ gpio_set_altfunc(43, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+
+ ltq_eth_pmac_init();
+}
+
+static void ltq_eth_port_config(struct ltq_eth_priv *priv,
+ const struct ltq_eth_port_config *port)
+{
+ struct phy_device *phydev;
+ struct switch_device *sw;
+ u32 rgmii_ctl;
+ unsigned int port_ctl, port_xmii = 0;
+
+ if (port->num > 1)
+ return;
+
+ rgmii_ctl = ltq_readl(&switch_regs->rgmii_ctl);
+
+ if (port->num == 1)
+ port_ctl = ltq_readl(&switch_regs->p1_ctl);
+ else
+ port_ctl = ltq_readl(&switch_regs->p0_ctl);
+
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_RGMII:
+ port_xmii = RGMII_CTL_P0IS_RGMII;
+
+ switch (port->rgmii_tx_delay) {
+ case 1:
+ port_xmii |= RGMII_CTL_P0TDLY_1_5;
+ break;
+ case 2:
+ port_xmii |= RGMII_CTL_P0TDLY_1_75;
+ break;
+ case 3:
+ port_xmii |= RGMII_CTL_P0TDLY_2_0;
+ break;
+ default:
+ break;
+ }
+
+ switch (port->rgmii_rx_delay) {
+ case 1:
+ port_xmii |= RGMII_CTL_P0RDLY_1_5;
+ break;
+ case 2:
+ port_xmii |= RGMII_CTL_P0RDLY_1_75;
+ break;
+ case 3:
+ port_xmii |= RGMII_CTL_P0RDLY_2_0;
+ break;
+ default:
+ break;
+ }
+
+ if (!(port->flags & LTQ_ETH_PORT_PHY)) {
+ port_xmii |= (RGMII_CTL_P0SPD_1000 |
+ RGMII_CTL_P0DUP_FULL);
+ port_ctl |= P0_CTL_FLP;
+ }
+
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ port_xmii = RGMII_CTL_P0IS_MII;
+
+ if (!(port->flags & LTQ_ETH_PORT_PHY)) {
+ port_xmii |= (RGMII_CTL_P0SPD_100 |
+ RGMII_CTL_P0DUP_FULL);
+ port_ctl |= P0_CTL_FLP;
+ }
+
+ break;
+ default:
+ break;
+ }
+
+ if (port->num == 1) {
+ ltq_writel(&switch_regs->p1_ctl, port_ctl);
+
+ rgmii_ctl &= ~RGMII_CTL_P1_MASK;
+ rgmii_ctl |= (port_xmii << RGMII_CTL_P1_SHIFT);
+ } else {
+ ltq_writel(&switch_regs->p0_ctl, port_ctl);
+
+ rgmii_ctl &= ~RGMII_CTL_P0_MASK;
+ rgmii_ctl |= port_xmii;
+ }
+
+ ltq_writel(&switch_regs->rgmii_ctl, rgmii_ctl);
+
+ /* Connect to external switch */
+ if (port->flags & LTQ_ETH_PORT_SWITCH) {
+ sw = switch_connect(priv->bus);
+ if (sw)
+ switch_setup(sw);
+ }
+
+ /* Connect to internal/external PHYs */
+ if (port->flags & LTQ_ETH_PORT_PHY) {
+ phydev = phy_connect(priv->bus, port->phy_addr, priv->dev,
+ port->phy_if);
+ if (phydev)
+ phy_config(phydev);
+
+ priv->phymap[port->num] = phydev;
+ }
+}
+
+int ltq_eth_initialize(const struct ltq_eth_board_config *board_config)
+{
+ struct eth_device *dev;
+ struct mii_dev *bus;
+ struct ltq_eth_priv *priv;
+ struct ltq_dma_device *dma_dev;
+ const struct ltq_eth_port_config *port = &board_config->ports[0];
+ int i, ret;
+
+ build_check_ar9_registers();
+
+ ltq_dma_init();
+ ltq_eth_hw_init(port);
+
+ dev = calloc(1, sizeof(*dev));
+ if (!dev)
+ return -1;
+
+ priv = calloc(1, sizeof(*priv));
+ if (!priv)
+ return -1;
+
+ bus = mdio_alloc();
+ if (!bus)
+ return -1;
+
+ sprintf(dev->name, LTQ_ETH_DRV_NAME);
+ dev->priv = priv;
+ dev->init = ltq_eth_init;
+ dev->halt = ltq_eth_halt;
+ dev->recv = ltq_eth_recv;
+ dev->send = ltq_eth_send;
+
+ sprintf(bus->name, LTQ_MDIO_DRV_NAME);
+ bus->read = ltq_mdio_read;
+ bus->write = ltq_mdio_write;
+ bus->priv = priv;
+
+ dma_dev = &priv->dma_dev;
+ dma_dev->port = 0;
+ dma_dev->rx_chan.chan_no = 0;
+ dma_dev->rx_chan.class = 0;
+ dma_dev->rx_chan.num_desc = LTQ_ETH_RX_BUFFER_CNT;
+ dma_dev->rx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+ dma_dev->rx_burst_len = LTQ_DMA_BURST_2WORDS;
+ dma_dev->tx_chan.chan_no = 1;
+ dma_dev->tx_chan.class = 0;
+ dma_dev->tx_chan.num_desc = LTQ_ETH_TX_BUFFER_CNT;
+ dma_dev->tx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+ dma_dev->tx_burst_len = LTQ_DMA_BURST_2WORDS;
+
+ priv->bus = bus;
+ priv->dev = dev;
+
+ ret = ltq_dma_register(dma_dev);
+ if (ret)
+ return ret;
+
+ ret = mdio_register(bus);
+ if (ret)
+ return ret;
+
+ ret = eth_register(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < board_config->num_ports; i++)
+ ltq_eth_port_config(priv, &board_config->ports[i]);
+
+ return 0;
+}