0b5d87fd30
As usual, this patches were taken (and rebased) from https://github.com/raspberrypi/linux/commits/rpi-4.1.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46853
37 lines
1.6 KiB
Diff
37 lines
1.6 KiB
Diff
From 909e2b2c6b73991394f89769aa3fca05ab146d72 Mon Sep 17 00:00:00 2001
|
|
From: Jonathan Bell <jonathan@raspberrypi.org>
|
|
Date: Tue, 30 Jun 2015 12:35:39 +0100
|
|
Subject: [PATCH 148/171] pinctrl: bcm2835: Clear the event latch register when
|
|
disabling interrupts
|
|
|
|
It's possible to hit a race condition if interrupts are generated on a GPIO
|
|
pin when the IRQ line in question is being disabled.
|
|
|
|
If the interrupt is freed, bcm2835_gpio_irq_disable() is called which
|
|
disables the event generation sources (edge, level). If an event occurred
|
|
between the last disabling of hard IRQs and the write to the event
|
|
source registers, a bit would be set in the GPIO event detect register
|
|
(GPEDSn) which goes unacknowledged by bcm2835_gpio_irq_handler()
|
|
so Linux complains loudly.
|
|
|
|
There is no per-GPIO mask register, so when disabling GPIO interrupts
|
|
write 1 to the relevant bit in GPEDSn to clear out any stale events.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
|
|
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 ++
|
|
1 file changed, 2 insertions(+)
|
|
|
|
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
|
|
@@ -503,6 +503,8 @@ static void bcm2835_gpio_irq_disable(str
|
|
|
|
spin_lock_irqsave(&pc->irq_lock[bank], flags);
|
|
bcm2835_gpio_irq_config(pc, gpio, false);
|
|
+ /* Clear events that were latched prior to clearing event sources */
|
|
+ bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
|
|
clear_bit(offset, &pc->enabled_irq_map[bank]);
|
|
spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
|
|
}
|