openwrtv3/target/linux/brcm2708/patches-4.9/950-0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

99 lines
2.8 KiB
Diff

From 78b53021ae0715792fb6a89bd9e7c02fc254be5c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Fri, 23 Oct 2015 16:26:55 +0200
Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/irqchip/irq-bcm2835.c | 43 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 41 insertions(+), 2 deletions(-)
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -50,8 +50,11 @@
#include <linux/of_irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <asm/exception.h>
+#include <asm/mach/irq.h>
/* Put the bank and irq (32 bits) into the hwirq */
#define MAKE_HWIRQ(b, n) (((b) << 5) | (n))
@@ -69,6 +72,9 @@
#define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
| SHORTCUT1_MASK | SHORTCUT2_MASK)
+#undef ARM_LOCAL_GPU_INT_ROUTING
+#define ARM_LOCAL_GPU_INT_ROUTING 0x0c
+
#define REG_FIQ_CONTROL 0x0c
#define REG_FIQ_ENABLE 0x80
#define REG_FIQ_DISABLE 0
@@ -94,6 +100,7 @@ struct armctrl_ic {
void __iomem *enable[NR_BANKS];
void __iomem *disable[NR_BANKS];
struct irq_domain *domain;
+ struct regmap *local_regmap;
};
static struct armctrl_ic intc __read_mostly;
@@ -127,12 +134,35 @@ static void armctrl_mask_irq(struct irq_
static void armctrl_unmask_irq(struct irq_data *d)
{
- if (d->hwirq >= NUMBER_IRQS)
+ if (d->hwirq >= NUMBER_IRQS) {
+ if (num_online_cpus() > 1) {
+ unsigned int data;
+ int ret;
+
+ if (!intc.local_regmap) {
+ pr_err("FIQ is disabled due to missing regmap\n");
+ return;
+ }
+
+ ret = regmap_read(intc.local_regmap,
+ ARM_LOCAL_GPU_INT_ROUTING, &data);
+ if (ret) {
+ pr_err("Failed to read int routing %d\n", ret);
+ return;
+ }
+
+ data &= ~0xc;
+ data |= (1 << 2);
+ regmap_write(intc.local_regmap,
+ ARM_LOCAL_GPU_INT_ROUTING, data);
+ }
+
writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
intc.base + REG_FIQ_CONTROL);
- else
+ } else {
writel_relaxed(HWIRQ_BIT(d->hwirq),
intc.enable[HWIRQ_BANK(d->hwirq)]);
+ }
}
static struct irq_chip armctrl_chip = {
@@ -210,6 +240,15 @@ static int __init armctrl_of_init(struct
set_handle_irq(bcm2835_handle_irq);
}
+ if (is_2836) {
+ intc.local_regmap =
+ syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local");
+ if (IS_ERR(intc.local_regmap)) {
+ pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n");
+ intc.local_regmap = NULL;
+ }
+ }
+
/* Make a duplicate irq range which is used to enable FIQ */
for (b = 0; b < NR_BANKS; b++) {
for (i = 0; i < bank_irqs[b]; i++) {