openwrtv3/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00

629 lines
12 KiB
Diff

From 0c1e8630dca36c2d5a9bf98a5f1f8c15f75d0253 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 12 Aug 2013 18:11:33 +0200
Subject: [PATCH 20/57] MIPS: ralink: update dts files
Add the devicetree nodes needed to make the newly merged drivers work.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/dts/mt7620a.dtsi | 135 +++++++++++++++++++++++
arch/mips/ralink/dts/rt3050.dtsi | 156 ++++++++++++++++++++++++++
arch/mips/ralink/dts/rt3883.dtsi | 219 +++++++++++++++++++++++++++++++++++++
3 files changed, 510 insertions(+)
--- a/arch/mips/ralink/dts/mt7620a.dtsi
+++ b/arch/mips/ralink/dts/mt7620a.dtsi
@@ -29,10 +29,32 @@
reg = <0x0 0x100>;
};
+ timer@100 {
+ compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
+ watchdog@120 {
+ compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ resets = <&rstctrl 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
intc: intc@200 {
compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "intc";
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -43,16 +65,129 @@
memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
+
+ resets = <&rstctrl 20>;
+ reset-names = "mc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+
+ uart@500 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ resets = <&rstctrl 13>;
+ reset-names = "pio";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <24>;
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <40>;
+ ralink,num-gpios = <32>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi@b00 {
+ compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
};
uartlite@c00 {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
+
+ systick@d00 {
+ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
+ reg = <0xd00 0x10>;
+
+ resets = <&rstctrl 28>;
+ reset-names = "intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <7>;
+ };
+ };
+
+ rstctrl: rstctrl {
+ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
+ #reset-cells = <1>;
};
};
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -9,6 +9,10 @@
};
};
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -29,10 +33,32 @@
reg = <0x0 0x100>;
};
+ timer@100 {
+ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
+ watchdog@120 {
+ compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ resets = <&rstctrl 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
intc: intc@200 {
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "intc";
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -43,17 +69,144 @@
memc@300 {
compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
+
+ resets = <&rstctrl 20>;
+ reset-names = "mc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+
+ uart@500 {
+ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ resets = <&rstctrl 13>;
+ reset-names = "pio";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <24>;
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <40>;
+ ralink,num-gpios = <12>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi@b00 {
+ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
};
uartlite@c00 {
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
+
+ };
+
+ rstctrl: rstctrl {
+ compatible = "ralink,rt3050-reset", "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ ethernet@10100000 {
+ compatible = "ralink,rt3050-eth";
+ reg = <0x10100000 10000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ esw@10110000 {
+ compatible = "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+
+ status = "disabled";
+ };
+
+ wmac@10180000 {
+ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
+ reg = <0x10180000 40000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ status = "disabled";
};
usb@101c0000 {
@@ -63,6 +216,9 @@
interrupt-parent = <&intc>;
interrupts = <18>;
+ resets = <&rstctrl 22>;
+ reset-names = "otg";
+
status = "disabled";
};
};
--- a/arch/mips/ralink/dts/rt3883.dtsi
+++ b/arch/mips/ralink/dts/rt3883.dtsi
@@ -29,10 +29,32 @@
reg = <0x0 0x100>;
};
+ timer@100 {
+ compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
+ watchdog@120 {
+ compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ resets = <&rstctrl 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
intc: intc@200 {
compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "intc";
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -43,16 +65,213 @@
memc@300 {
compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
+
+ resets = <&rstctrl 20>;
+ reset-names = "mc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+
+ uart@500 {
+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ resets = <&rstctrl 13>;
+ reset-names = "pio";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <24>;
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <40>;
+ ralink,num-gpios = <32>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio3: gpio@688 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x688 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <72>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi0: spi@b00 {
+ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ status = "disabled";
};
uartlite@c00 {
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
};
+
+ rstctrl: rstctrl {
+ compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ status = "disabled";
+
+ ralink,pci-slot = <1>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ralink,pci-slot = <17>;
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ralink,pci-slot = <18>;
+
+ status = "disabled";
+ };
+ };
+ };
};