openwrtv3/target/linux/brcm63xx/patches-3.10/519_board_CPVA502plus.patch
Jonas Gorski 66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00

57 lines
1 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1151,6 +1151,46 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_CPVA502plus = {
+ .name = "CPVA502+",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "CPVA502+:green:phone",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "CPVA502+:green:link",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
+ .gpio = 4,
+ .active_low = 1,
+ },
+ },
+};
+
#endif
/*
@@ -2227,6 +2267,7 @@ static const struct board_info __initcon
&board_V2110,
&board_ct536_ct5621,
&board_96348A_122,
+ &board_CPVA502plus,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358