115 lines
3.3 KiB
C
115 lines
3.3 KiB
C
#include "xhci-mtk.h"
|
|
#include "xhci-mtk-power.h"
|
|
#include "xhci.h"
|
|
#include <linux/kernel.h> /* printk() */
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
static int g_num_u3_port;
|
|
static int g_num_u2_port;
|
|
|
|
|
|
void enableXhciAllPortPower(struct xhci_hcd *xhci){
|
|
int i;
|
|
u32 port_id, temp;
|
|
u32 __iomem *addr;
|
|
|
|
g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
|
|
g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
|
|
|
|
for(i=1; i<=g_num_u3_port; i++){
|
|
port_id=i;
|
|
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
|
|
temp = xhci_readl(xhci, addr);
|
|
temp = xhci_port_state_to_neutral(temp);
|
|
temp |= PORT_POWER;
|
|
xhci_writel(xhci, temp, addr);
|
|
}
|
|
for(i=1; i<=g_num_u2_port; i++){
|
|
port_id=i+g_num_u3_port;
|
|
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
|
|
temp = xhci_readl(xhci, addr);
|
|
temp = xhci_port_state_to_neutral(temp);
|
|
temp |= PORT_POWER;
|
|
xhci_writel(xhci, temp, addr);
|
|
}
|
|
}
|
|
|
|
void enableAllClockPower(){
|
|
|
|
int i;
|
|
u32 temp;
|
|
|
|
g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
|
|
g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
|
|
|
|
//2. Enable xHC
|
|
writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
|
|
writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
|
|
writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
|
|
|
|
//1. Enable target ports
|
|
for(i=0; i<g_num_u3_port; i++){
|
|
temp = readl(SSUSB_U3_CTRL(i));
|
|
temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
|
|
writel(temp, SSUSB_U3_CTRL(i));
|
|
}
|
|
for(i=0; i<g_num_u2_port; i++){
|
|
temp = readl(SSUSB_U2_CTRL(i));
|
|
temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
|
|
writel(temp, SSUSB_U2_CTRL(i));
|
|
}
|
|
msleep(100);
|
|
}
|
|
|
|
|
|
//(X)disable clock/power of a port
|
|
//(X)if all ports are disabled, disable IP ctrl power
|
|
//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
|
|
//and IP could be disable if suspended.
|
|
//If doesn't not disable all ports at first, the IP clock/power will never be disabled
|
|
//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
|
|
//port_index: port number
|
|
//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
|
|
void disablePortClockPower(void){
|
|
int i;
|
|
u32 temp;
|
|
|
|
g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
|
|
g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
|
|
|
|
for(i=0; i<g_num_u3_port; i++){
|
|
temp = readl(SSUSB_U3_CTRL(i));
|
|
temp = temp | (SSUSB_U3_PORT_PDN);
|
|
writel(temp, SSUSB_U3_CTRL(i));
|
|
}
|
|
for(i=0; i<g_num_u2_port; i++){
|
|
temp = readl(SSUSB_U2_CTRL(i));
|
|
temp = temp | (SSUSB_U2_PORT_PDN);
|
|
writel(temp, SSUSB_U2_CTRL(i));
|
|
}
|
|
writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
|
|
}
|
|
|
|
//if IP ctrl power is disabled, enable it
|
|
//enable clock/power of a port
|
|
//port_index: port number
|
|
//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
|
|
void enablePortClockPower(int port_index, int port_rev){
|
|
int i;
|
|
u32 temp;
|
|
|
|
writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
|
|
|
|
if(port_rev == 0x3){
|
|
temp = readl(SSUSB_U3_CTRL(port_index));
|
|
temp = temp & (~SSUSB_U3_PORT_PDN);
|
|
writel(temp, SSUSB_U3_CTRL(port_index));
|
|
}
|
|
else if(port_rev == 0x2){
|
|
temp = readl(SSUSB_U2_CTRL(port_index));
|
|
temp = temp & (~SSUSB_U2_PORT_PDN);
|
|
writel(temp, SSUSB_U2_CTRL(port_index));
|
|
}
|
|
}
|
|
|