openwrtv3/package/base-files/files/bin/config_generate
Christian Lamparter 641dc50164 base-files: make it possible to specify switch led mode
The swconfig switch led driver has the ability to switch
between a "link, rx and/or tx" mode. However, this feature
was not implemented in uci, the led init script and
config_generate.

This patch adds a seventh parameter to the
ucidef_set_led_switch() function. The accepted values for
this parameter are: link, rx and tx.
Any permutations of these three values are supported, as
long as they are properly encased with quotes.
If the parameter is not specified it will default to "all"
(link rx tx).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00

446 lines
9.5 KiB
Bash
Executable file

#!/bin/sh
CFG=/etc/board.json
. /usr/share/libubox/jshn.sh
[ -s $CFG ] || /bin/board_detect || exit 1
[ -s /etc/config/network -a -s /etc/config/system ] && exit 0
generate_static_network() {
uci -q batch <<-EOF
delete network.loopback
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
EOF
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
delete network.globals
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
}
if json_is_a dsl object; then
json_select dsl
if json_is_a atmbridge object; then
json_select atmbridge
local vpi vci encaps payload nameprefix
json_get_vars vpi vci encaps payload nameprefix
uci -q batch <<-EOF
delete network.atm
set network.atm='atm-bridge'
set network.atm.vpi='$vpi'
set network.atm.vci='$vci'
set network.atm.encaps='$encaps'
set network.atm.payload='$payload'
set network.atm.nameprefix='$nameprefix'
EOF
json_select ..
fi
if json_is_a modem object; then
json_select modem
local type annex firmware tone xfer_mode
json_get_vars type annex firmware tone xfer_mode
uci -q batch <<-EOF
delete network.dsl
set network.dsl='dsl'
set network.dsl.annex='$annex'
set network.dsl.firmware='$firmware'
set network.dsl.tone='$tone'
set network.dsl.xfer_mode='$xfer_mode'
EOF
json_select ..
fi
json_select ..
fi
}
addr_offset=2
generate_network() {
local ifname macaddr protocol type ipaddr netmask
json_select network
json_select "$1"
json_get_vars ifname macaddr protocol ipaddr netmask
json_select ..
json_select ..
[ -n "$ifname" ] || return
# force bridge for multi-interface devices (and lan)
case "$1:$ifname" in
*\ * | lan:*) type="bridge" ;;
esac
uci -q batch <<-EOF
delete network.$1
set network.$1='interface'
set network.$1.type='$type'
set network.$1.ifname='$ifname'
set network.$1.proto='none'
EOF
[ -n "$macaddr" ] && uci -q batch <<-EOF
delete network.$1_dev
set network.$1_dev='device'
set network.$1_dev.name='$ifname'
set network.$1_dev.macaddr='$macaddr'
EOF
case "$protocol" in
static)
local ipad
case "$1" in
lan) ipad=${ipaddr:-"192.168.1.1"} ;;
*) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
esac
netm=${netmask:-"255.255.255.0"}
uci -q batch <<-EOF
set network.$1.proto='static'
set network.$1.ipaddr='$ipad'
set network.$1.netmask='$netm'
EOF
[ -e /proc/sys/net/ipv6 ] && uci set network.$1.ip6assign='60'
;;
dhcp)
# fixup IPv6 slave interface if parent is a bridge
[ "$type" = "bridge" ] && ifname="br-$1"
uci set network.$1.proto='dhcp'
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='$ifname'
set network.${1}6.proto='dhcpv6'
EOF
}
;;
pppoe)
uci -q batch <<-EOF
set network.$1.proto='pppoe'
set network.$1.username='username'
set network.$1.password='password'
EOF
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
set network.$1.ipv6='1'
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='@${1}'
set network.${1}6.proto='dhcpv6'
EOF
}
;;
esac
}
generate_switch_vlans_ports() {
local switch="$1"
local port ports role roles num attr val
#
# autogenerate vlans
#
if json_is_a roles array; then
json_get_keys roles roles
json_select roles
for role in $roles; do
json_select "$role"
json_get_vars ports
json_select ..
uci -q batch <<-EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$switch'
set network.@switch_vlan[-1].vlan='$role'
set network.@switch_vlan[-1].ports='$ports'
EOF
done
json_select ..
fi
#
# write port specific settings
#
if json_is_a ports array; then
json_get_keys ports ports
json_select ports
for port in $ports; do
json_select "$port"
json_get_vars num
if json_is_a attr object; then
json_get_keys attr attr
json_select attr
uci -q batch <<-EOF
add network switch_port
set network.@switch_port[-1].device='$switch'
set network.@switch_port[-1].port=$num
EOF
for attr in $attr; do
json_get_var val "$attr"
uci -q set network.@switch_port[-1].$attr="$val"
done
json_select ..
fi
json_select ..
done
json_select ..
fi
}
generate_switch() {
local key="$1"
local vlans
json_select switch
json_select "$key"
json_get_vars enable reset blinkrate cpu_port
uci -q batch <<-EOF
add network switch
set network.@switch[-1].name='$key'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
set network.@switch[-1].blinkrate='$blinkrate'
EOF
generate_switch_vlans_ports "$1"
json_select ..
json_select ..
}
generate_static_system() {
uci -q batch <<-EOF
delete system.@system[0]
add system system
set system.@system[-1].hostname='OpenWrt'
set system.@system[-1].timezone='UTC'
set system.@system[-1].ttylogin='0'
set system.@system[-1].log_size='64'
set system.@system[-1].urandom_seed='0'
delete system.ntp
set system.ntp='timeserver'
set system.ntp.enabled='1'
set system.ntp.enable_server='0'
add_list system.ntp.server='0.openwrt.pool.ntp.org'
add_list system.ntp.server='1.openwrt.pool.ntp.org'
add_list system.ntp.server='2.openwrt.pool.ntp.org'
add_list system.ntp.server='3.openwrt.pool.ntp.org'
EOF
if json_is_a system object; then
json_select system
local hostname
if json_get_var hostname hostname; then
uci -q set "system.@system[-1].hostname=$hostname"
fi
if json_is_a ntpserver array; then
local keys key
json_get_keys keys ntpserver
json_select ntpserver
uci -q delete "system.ntp.server"
for key in $keys; do
local server
if json_get_var server "$key"; then
uci -q add_list "system.ntp.server=$server"
fi
done
json_select ..
fi
json_select ..
fi
}
generate_rssimon() {
local key="$1"
local cfg="rssid_$key"
local refresh threshold
json_select rssimon
json_select "$key"
json_get_vars refresh threshold
json_select ..
json_select ..
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='rssid'
set system.$cfg.dev='$key'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
}
generate_led() {
local key="$1"
local cfg="led_$key"
json_select led
json_select "$key"
json_get_vars name sysfs type trigger default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.default='$default'
EOF
case "$type" in
gpio)
local gpio inverted
json_get_vars gpio inverted
uci -q batch <<-EOF
set system.$cfg.trigger='gpio'
set system.$cfg.gpio='$gpio'
set system.$cfg.inverted='$inverted'
EOF
;;
netdev)
local device mode
json_get_vars device mode
uci -q batch <<-EOF
set system.$cfg.trigger='netdev'
set system.$cfg.mode='$mode'
set system.$cfg.dev='$device'
EOF
;;
usb)
local device
json_get_vars device
uci -q batch <<-EOF
set system.$cfg.trigger='usbdev'
set system.$cfg.interval='50'
set system.$cfg.dev='$device'
EOF
;;
usbport)
local ports port
json_get_values ports ports
uci set system.$cfg.trigger='usbport'
for port in $ports; do
uci add_list system.$cfg.port=$port
done
;;
rssi)
local iface minq maxq offset factor
json_get_vars iface minq maxq offset factor
uci -q batch <<-EOF
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
;;
switch)
local port_mask speed_mask mode
json_get_vars port_mask speed_mask mode
uci -q batch <<-EOF
set system.$cfg.port_mask='$port_mask'
set system.$cfg.speed_mask='$speed_mask'
set system.$cfg.mode='$mode'
EOF
;;
portstate)
local port_state
json_get_vars port_state
uci -q batch <<-EOF
set system.$cfg.port_state='$port_state'
EOF
;;
timer|oneshot)
local delayon delayoff
json_get_vars delayon delayoff
uci -q batch <<-EOF
set system.$cfg.trigger='$type'
set system.$cfg.delayon='$delayon'
set system.$cfg.delayoff='$delayoff'
EOF
;;
esac
json_select ..
json_select ..
}
generate_gpioswitch() {
local cfg="$1"
json_select gpioswitch
json_select "$cfg"
local name pin default
json_get_vars name pin default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='gpio_switch'
set system.$cfg.name='$name'
set system.$cfg.gpio_pin='$pin'
set system.$cfg.value='$default'
EOF
json_select ..
json_select ..
}
json_init
json_load "$(cat ${CFG})"
if [ ! -s /etc/config/network ]; then
touch /etc/config/network
generate_static_network
json_get_keys keys network
for key in $keys; do generate_network $key; done
json_get_keys keys switch
for key in $keys; do generate_switch $key; done
fi
if [ ! -s /etc/config/system ]; then
touch /etc/config/system
generate_static_system
json_get_keys keys rssimon
for key in $keys; do generate_rssimon $key; done
json_get_keys keys gpioswitch
for key in $keys; do generate_gpioswitch $key; done
json_get_keys keys led
for key in $keys; do generate_led $key; done
fi
uci commit