openwrtv3/target/linux/brcm2708/patches-4.4/0323-Allow-up-to-24dB-digital-gain-to-be-applied-when-usi.patch
Álvaro Fernández Rojas 2b1c6b21b5 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-10 14:54:26 +02:00

60 lines
2.4 KiB
Diff

From 691922255a15630c6f726c4c871ce2475d4fec72 Mon Sep 17 00:00:00 2001
From: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
Date: Fri, 6 May 2016 09:42:55 +0100
Subject: [PATCH] Allow up to 24dB digital gain to be applied when using
IQAudIO DAC
24db_digital_gain DT param can be used to specify that PCM512x
codec "Digital" volume control should not be limited to 0dB gain,
and if specified will allow the full 24dB gain.
Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
---
arch/arm/boot/dts/overlays/README | 17 +++++++++++++++--
arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 6 +++++-
2 files changed, 20 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -490,8 +490,21 @@ Params: <None>
Name: iqaudio-dac
Info: Configures the IQaudio DAC audio card
-Load: dtoverlay=iqaudio-dac
-Params: <None>
+Load: dtoverlay=iqaudio-dac,<param>
+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec
+ Digital volume control. Enable with
+ "dtoverlay=iqaudio-dac,24db_digital_gain"
+ (The default behaviour is that the Digital
+ volume control is limited to a maximum of
+ 0dB. ie. it can attenuate but not provide
+ gain. For most users, this will be desired
+ as it will prevent clipping. By appending
+ the 24db_digital_gain parameter, the Digital
+ volume control will allow up to 24dB of
+ gain. If this parameter is enabled, it is the
+ responsibility of the user to ensure that
+ the Digital volume control is set to a value
+ that does not result in clipping/distortion!)
Name: iqaudio-dacplus
--- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts
+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts
@@ -30,10 +30,14 @@
fragment@2 {
target = <&sound>;
- __overlay__ {
+ frag2: __overlay__ {
compatible = "iqaudio,iqaudio-dac";
i2s-controller = <&i2s>;
status = "okay";
};
};
+
+ __overrides__ {
+ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?";
+ };
};