openwrtv3/target/linux/brcm2708/patches-4.4/0415-Add-critical-information-for-getting-pi3-miniuart-bt.patch
Álvaro Fernández Rojas 2b1c6b21b5 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-10 14:54:26 +02:00

25 lines
1.1 KiB
Diff

From 740fa92fd41e2c4dd5798d462fe4646d0cc6cc48 Mon Sep 17 00:00:00 2001
From: David Lechner <david@lechnology.com>
Date: Mon, 27 Jun 2016 22:52:22 -0500
Subject: [PATCH] Add critical information for getting pi3-miniuart-bt overlay
to work
Bluetooth on RPi 3 using uart1 will not work without setting core_freq=250 in config.txt. This is not
documented anywhere, so this seems like a good place to start.
---
arch/arm/boot/dts/overlays/README | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -691,7 +691,9 @@ Info: Switch Pi3 Bluetooth function to
N.B. It is also necessary to edit /lib/systemd/system/hciuart.service
and replace ttyAMA0 with ttyS0, unless you have a system with udev rules
that create /dev/serial0 and /dev/serial1, in which case use
- /dev/serial1 instead because it will always be correct.
+ /dev/serial1 instead because it will always be correct. Furthermore,
+ you must also set core_freq=250 in config.txt or the miniuart will not
+ work.
Load: dtoverlay=pi3-miniuart-bt
Params: <None>