openwrtv3/target/linux/brcm2708/patches-4.4/0089-scripts-Multi-platform-support-for-mkknlimg-and-knli.patch
Álvaro Fernández Rojas 2b1c6b21b5 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-10 14:54:26 +02:00

246 lines
7.1 KiB
Diff

From 93ede86bcccc686cdc933e0711289b0312f0361a Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Wed, 11 Nov 2015 11:38:59 +0000
Subject: [PATCH] scripts: Multi-platform support for mkknlimg and knlinfo
The firmware uses tags in the kernel trailer to choose which dtb file
to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true,
otherwise it loads bcm270*.dtb. This scheme breaks if an image supports
multiple platforms.
This patch adds '270X' and '283X' tags to indicate support for RPi and
upstream platforms, respectively. '283x' (note lower case 'x') is left
for old firmware, and is only set if the image only supports upstream
builds.
---
scripts/knlinfo | 2 +
scripts/mkknlimg | 136 +++++++++++++++++++++++++++++++------------------------
2 files changed, 80 insertions(+), 58 deletions(-)
--- a/scripts/knlinfo
+++ b/scripts/knlinfo
@@ -18,6 +18,8 @@ my %atom_formats =
(
'DTOK' => \&format_bool,
'KVer' => \&format_string,
+ '270X' => \&format_bool,
+ '283X' => \&format_bool,
'283x' => \&format_bool,
);
--- a/scripts/mkknlimg
+++ b/scripts/mkknlimg
@@ -13,12 +13,20 @@ use strict;
use warnings;
use integer;
+use constant FLAG_PI => 0x01;
+use constant FLAG_DTOK => 0x02;
+use constant FLAG_DDTK => 0x04;
+use constant FLAG_270X => 0x08;
+use constant FLAG_283X => 0x10;
+
my $trailer_magic = 'RPTL';
my $tmpfile1 = "/tmp/mkknlimg_$$.1";
my $tmpfile2 = "/tmp/mkknlimg_$$.2";
my $dtok = 0;
+my $ddtk = 0;
+my $is_270x = 0;
my $is_283x = 0;
while (@ARGV && ($ARGV[0] =~ /^-/))
@@ -28,6 +36,14 @@ while (@ARGV && ($ARGV[0] =~ /^-/))
{
$dtok = 1;
}
+ elsif ($arg eq '--ddtk')
+ {
+ $ddtk = 1;
+ }
+ elsif ($arg eq '--270x')
+ {
+ $is_270x = 1;
+ }
elsif ($arg eq '--283x')
{
$is_283x = 1;
@@ -50,30 +66,33 @@ if (! -r $kernel_file)
usage();
}
-my @wanted_strings =
-(
- 'bcm2708_fb',
- 'brcm,bcm2835-mmc',
- 'brcm,bcm2835-sdhost',
- 'brcm,bcm2708-pinctrl',
- 'brcm,bcm2835-gpio',
- 'brcm,bcm2835',
- 'brcm,bcm2836'
-);
+my $wanted_strings =
+{
+ 'bcm2708_fb' => FLAG_PI,
+ 'brcm,bcm2835-mmc' => FLAG_PI,
+ 'brcm,bcm2835-sdhost' => FLAG_PI,
+ 'brcm,bcm2708-pinctrl' => FLAG_PI | FLAG_DTOK,
+ 'brcm,bcm2835-gpio' => FLAG_PI | FLAG_DTOK,
+ 'brcm,bcm2708' => FLAG_PI | FLAG_DTOK | FLAG_270X,
+ 'brcm,bcm2709' => FLAG_PI | FLAG_DTOK | FLAG_270X,
+ 'brcm,bcm2835' => FLAG_PI | FLAG_DTOK | FLAG_283X,
+ 'brcm,bcm2836' => FLAG_PI | FLAG_DTOK | FLAG_283X,
+ 'of_overlay_apply' => FLAG_DTOK | FLAG_DDTK,
+};
my $res = try_extract($kernel_file, $tmpfile1);
-$res = try_decompress('\037\213\010', 'xy', 'gunzip', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('BZh', 'xy', 'bunzip2', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\211\114\132', 'xy', 'lzop -d', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res ||= try_decompress('\037\213\010', 'xy', 'gunzip', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('BZh', 'xy', 'bunzip2', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\211\114\132', 'xy', 'lzop -d', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1,
+ $kernel_file, $tmpfile1, $tmpfile2);
my $append_trailer;
my $trailer;
@@ -83,27 +102,21 @@ $append_trailer = $dtok;
if ($res)
{
- $kver = $res->{''} || '?';
+ $kver = $res->{'kver'} || '?';
+ my $flags = $res->{'flags'};
print("Version: $kver\n");
- $append_trailer = $dtok;
- if (!$dtok)
+ if ($flags & FLAG_PI)
{
- if (config_bool($res, 'bcm2708_fb') ||
- config_bool($res, 'brcm,bcm2835-mmc') ||
- config_bool($res, 'brcm,bcm2835-sdhost'))
- {
- $dtok ||= config_bool($res, 'brcm,bcm2708-pinctrl');
- $dtok ||= config_bool($res, 'brcm,bcm2835-gpio');
- $is_283x ||= config_bool($res, 'brcm,bcm2835');
- $is_283x ||= config_bool($res, 'brcm,bcm2836');
- $dtok ||= $is_283x;
- $append_trailer = 1;
- }
- else
- {
- print ("* This doesn't look like a Raspberry Pi kernel. In pass-through mode.\n");
- }
+ $append_trailer = 1;
+ $dtok ||= ($flags & FLAG_DTOK) != 0;
+ $is_270x ||= ($flags & FLAG_270X) != 0;
+ $is_283x ||= ($flags & FLAG_283X) != 0;
+ $ddtk ||= ($flags & FLAG_DDTK) != 0;
+ }
+ else
+ {
+ print ("* This doesn't look like a Raspberry Pi kernel. In pass-through mode.\n");
}
}
elsif (!$dtok)
@@ -114,6 +127,8 @@ elsif (!$dtok)
if ($append_trailer)
{
printf("DT: %s\n", $dtok ? "y" : "n");
+ printf("DDT: %s\n", $ddtk ? "y" : "n") if ($ddtk);
+ printf("270x: %s\n", $is_270x ? "y" : "n");
printf("283x: %s\n", $is_283x ? "y" : "n");
my @atoms;
@@ -121,7 +136,10 @@ if ($append_trailer)
push @atoms, [ $trailer_magic, pack('V', 0) ];
push @atoms, [ 'KVer', $kver ];
push @atoms, [ 'DTOK', pack('V', $dtok) ];
- push @atoms, [ '283x', pack('V', $is_283x) ];
+ push @atoms, [ 'DDTK', pack('V', $ddtk) ] if ($ddtk);
+ push @atoms, [ '270X', pack('V', $is_270x) ];
+ push @atoms, [ '283X', pack('V', $is_283x) ];
+ push @atoms, [ '283x', pack('V', $is_283x && !$is_270x) ];
$trailer = pack_trailer(\@atoms);
$atoms[0]->[1] = pack('V', length($trailer));
@@ -175,7 +193,7 @@ END {
sub usage
{
- print ("Usage: mkknlimg [--dtok] [--283x] <vmlinux|zImage|bzImage> <outfile>\n");
+ print ("Usage: mkknlimg [--dtok] [--270x] [--283x] <vmlinux|zImage|bzImage> <outfile>\n");
exit(1);
}
@@ -189,15 +207,8 @@ sub try_extract
chomp($ver);
- my $res = { ''=>$ver };
- my $string_pattern = '^('.join('|', @wanted_strings).')$';
-
- my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`;
- foreach my $match (@matches)
- {
- chomp($match);
- $res->{$match} = 1;
- }
+ my $res = { 'kver'=>$ver };
+ $res->{'flags'} = strings_to_flags($knl, $wanted_strings);
return $res;
}
@@ -224,6 +235,22 @@ sub try_decompress
return undef;
}
+sub strings_to_flags
+{
+ my ($knl, $strings) = @_;
+ my $string_pattern = '^('.join('|', keys(%$strings)).')$';
+ my $flags = 0;
+
+ my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`;
+ foreach my $match (@matches)
+ {
+ chomp($match);
+ $flags |= $strings->{$match};
+ }
+
+ return $flags;
+}
+
sub pack_trailer
{
my ($atoms) = @_;
@@ -235,10 +262,3 @@ sub pack_trailer
}
return $trailer;
}
-
-sub config_bool
-{
- my ($configs, $wanted) = @_;
- my $val = $configs->{$wanted} || 'n';
- return (($val eq 'y') || ($val eq '1'));
-}