openwrtv3/target/linux/ramips/dts/TEW-692GR.dts
Mathias Kresin cc5c8f681e ramips: add TEW-691GR/TEW-692GR 2.4 GHz interface mac addresses
Assign an unused MAC addresses to the 2.4GHz wifi interface as it was
originally planed but not possible.

The MAC address numbering of the TEW-691GR changes to the following
pattern:

  LAN:  AA:BB:CC:DD:EE:0C
  WIFI: AA:BB:CC:DD:EE:0D
  WAN:  AA:BB:CC:DD:EE:0F

The MAC address numbering of the TEW-692GR changes to the following
pattern:

  LAN:    AA:BB:CC:DD:EE:e4
  WAN:    AA:BB:CC:DD:EE:e5
  2.4GHz: AA:BB:CC:DD:EE:e7
  5 GHz:  AA:BB:CC:DD:EE:e8

Set the label and compatible string for the TEW-692GR PCIe wireless
according to the the PCI binding documentation.

Use the wifi@0,0 label and the pci0,0 compatible string since the PCI
vendor and device id is unknown. It should work anyway since the
compatible string isn't evaluated (yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:23:00 +01:00

149 lines
2.5 KiB
Text

/dts-v1/;
#include "rt3883.dtsi"
/ {
compatible = "TEW-692GR", "ralink,rt3883-soc";
model = "TRENDnet TEW-692GR";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x0030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x007b0000>;
label = "firmware";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "tew-692gr:orange:wps";
gpios = <&gpio0 9 1>;
};
wps2 {
label = "tew-692gr:green:wps";
gpios = <&gpio1 4 1>;
};
};
};
&gpio1 {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
0x50 0xc437c437 /* LED Control Register 0 */
0x54 0xc337c337 /* LED Control Register 1 */
0x58 0x00000000 /* LED Control Register 2 */
0x5c 0x03ffff00 /* LED Control Register 3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
};
&pci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
wifi@0,0 {
compatible = "pci0,0";
reg = < 0x10000 0 0 0 0 >;
ralink,2ghz = <0>;
};
};
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;
ralink,5ghz = <0>;
mtd-mac-address = <&factory 0x4>;
mtd-mac-address-increment = <3>;
};