openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c
FUKAUMI Naoki 0165203304 ar71xx: add support for Buffalo BHR-4GRV2
Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2016-11-16 10:54:33 +01:00

171 lines
4.8 KiB
C

/*
* Buffalo BHR-4GRV2 board support
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
*
* Based on mach-ap136.c and mach-wzr-450hp2.c
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#define BHR_4GRV2_GPIO_LED_VPN_RED 3
#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18
#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19
#define BHR_4GRV2_GPIO_LED_DIAG_RED 20
#define BHR_4GRV2_GPIO_BTN_RESET 17
#define BHR_4GRV2_GPIO_BTN_ECO 21
#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */
#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
#define BHR_4GRV2_MAC0_OFFSET 0
#define BHR_4GRV2_MAC1_OFFSET 6
static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
{
.name = "buffalo:red:vpn",
.gpio = BHR_4GRV2_GPIO_LED_VPN_RED,
.active_low = 1,
},
{
.name = "buffalo:green:vpn",
.gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN,
.active_low = 1,
},
{
.name = "buffalo:green:power",
.gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN,
.active_low = 1,
},
{
.name = "buffalo:red:diag",
.gpio = BHR_4GRV2_GPIO_LED_DIAG_RED,
.active_low = 1,
}
};
static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
.gpio = BHR_4GRV2_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "ECO button",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
.gpio = BHR_4GRV2_GPIO_BTN_ECO,
.active_low = 1,
},
};
/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
.pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
.pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &bhr_4grv2_ar8327_data,
},
};
static void __init bhr_4grv2_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
bhr_4grv2_leds_gpio);
ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(bhr_4grv2_gpio_keys),
bhr_4grv2_gpio_keys);
mdiobus_register_board_info(bhr_4grv2_mdio0_info,
ARRAY_SIZE(bhr_4grv2_mdio0_info));
ath79_register_mdio(0, 0x0);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
/* GMAC0 is connected to the RGMII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x56000000;
ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
ath79_register_eth(0);
/* GMAC1 is connected to the SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
"Buffalo BHR-4GRV2", bhr_4grv2_setup);