openwrtv3/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
John Crispin bb255f7429 ipq806x: add v4.9 support
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-16 20:25:32 +01:00

153 lines
3.7 KiB
Text

#include "qcom-ipq8064.dtsi"
/ {
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
qcom,pvs {
qcom,pvs-format-a;
qcom,speed0-pvs0-bin-v0 =
< 1725000000 1262500 >,
< 1400000000 1175000 >,
< 1000000000 1100000 >,
< 800000000 1050000 >,
< 600000000 1000000 >,
< 384000000 975000 >;
qcom,speed0-pvs1-bin-v0 =
< 1725000000 1225000 >,
< 1400000000 1150000 >,
< 1000000000 1075000 >,
< 800000000 1025000 >,
< 600000000 975000 >,
< 384000000 950000 >;
qcom,speed0-pvs2-bin-v0 =
< 1725000000 1200000 >,
< 1400000000 1125000 >,
< 1000000000 1050000 >,
< 800000000 1000000 >,
< 600000000 950000 >,
< 384000000 925000 >;
qcom,speed0-pvs3-bin-v0 =
< 1725000000 1175000 >,
< 1400000000 1100000 >,
< 1000000000 1025000 >,
< 800000000 975000 >,
< 600000000 925000 >,
< 384000000 900000 >;
qcom,speed0-pvs4-bin-v0 =
< 1725000000 1150000 >,
< 1400000000 1075000 >,
< 1000000000 1000000 >,
< 800000000 950000 >,
< 600000000 900000 >,
< 384000000 875000 >;
qcom,speed0-pvs5-bin-v0 =
< 1725000000 1100000 >,
< 1400000000 1025000 >,
< 1000000000 950000 >,
< 800000000 900000 >,
< 600000000 850000 >,
< 384000000 825000 >;
qcom,speed0-pvs6-bin-v0 =
< 1725000000 1050000 >,
< 1400000000 975000 >,
< 1000000000 900000 >,
< 800000000 850000 >,
< 600000000 800000 >,
< 384000000 775000 >;
};
soc: soc {
rpm@108000 {
regulators {
smb208_s2a: s2a {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
smb208_s2b: s2b {
regulator-min-microvolt = <775000>;
regulator-max-microvolt = <1275000>;
};
};
};
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sdcc1bam:dma@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <0 98 0>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
sdcc3bam:dma@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <0 96 0>;
clocks = <&gcc SDC3_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
sdcc3: sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
#mmc-ddr-1_8v;
sd-uhs-sdr104;
sd-uhs-ddr50;
vqmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
};
};
};