openwrtv3/target/linux/mvebu/patches-4.4/031-mvneta-implement-ethtool-autonegotiation-control.patch
Hauke Mehrtens 39e8ab17d5 kernel: update kernel 4.4 to version 4.4.79
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-28 22:46:26 +02:00

165 lines
5.2 KiB
Diff

From: Stas Sergeev <stsp@list.ru>
Date: Wed, 2 Dec 2015 20:35:11 +0300
Subject: [PATCH] mvneta: implement ethtool autonegotiation control
This patch allows to do
ethtool -s eth0 autoneg off
ethtool -s eth0 autoneg on
to disable or enable autonegotiation at run-time.
Without that functionality, the only way to control the autonegotiation
is to modify the device tree.
This is needed if you plan to use the same kernel with
different ethernet switches, the ones that support the in-band
status and the ones that not.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -371,7 +371,7 @@ struct mvneta_port {
unsigned int duplex;
unsigned int speed;
unsigned int tx_csum_limit;
- int use_inband_status:1;
+ unsigned int use_inband_status:1;
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
};
@@ -973,6 +973,44 @@ static void mvneta_set_other_mcast_table
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
}
+static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
+{
+ u32 val;
+
+ if (enable) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
+ MVNETA_GMAC_FORCE_LINK_DOWN |
+ MVNETA_GMAC_AN_FLOW_CTRL_EN);
+ val |= MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+ } else {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN);
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+ }
+}
+
/* This method sets defaults to the NETA port:
* Clears interrupt Cause and Mask registers.
* Clears all MAC tables.
@@ -1058,39 +1096,7 @@ static void mvneta_defaults_set(struct m
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
- if (pp->use_inband_status) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_AN_FLOW_CTRL_EN);
- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- } else {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- }
-
+ mvneta_set_autoneg(pp, pp->use_inband_status);
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
@@ -2954,10 +2960,43 @@ int mvneta_ethtool_get_settings(struct n
int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mvneta_port *pp = netdev_priv(dev);
+ struct phy_device *phydev = pp->phy_dev;
- if (!pp->phy_dev)
+ if (!phydev)
return -ENODEV;
+ if ((cmd->autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
+ u32 val;
+
+ mvneta_set_autoneg(pp, cmd->autoneg == AUTONEG_ENABLE);
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+
+ if (phydev->duplex)
+ val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ if (phydev->speed == SPEED_1000)
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+ else if (phydev->speed == SPEED_100)
+ val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+ pp->use_inband_status = (cmd->autoneg == AUTONEG_ENABLE);
+ netdev_info(pp->dev, "autoneg status set to %i\n",
+ pp->use_inband_status);
+
+ if (netif_running(dev)) {
+ mvneta_port_down(pp);
+ mvneta_port_up(pp);
+ }
+ }
+
return phy_ethtool_sset(pp->phy_dev, cmd);
}